From: bugzilla-daemon@bugzilla.kernel.org
To: linux-scsi@vger.kernel.org
Subject: [Bug 98171] [Regression] Marvell SE91xx SATA 3 controllers not recognized correctly
Date: Sat, 08 Aug 2015 23:58:53 +0000 [thread overview]
Message-ID: <bug-98171-11613-4XOxt2LUqe@https.bugzilla.kernel.org/> (raw)
In-Reply-To: <bug-98171-11613@https.bugzilla.kernel.org/>
https://bugzilla.kernel.org/show_bug.cgi?id=98171
Carlos Guidugli <guidugli@gmail.com> changed:
What |Removed |Added
----------------------------------------------------------------------------
CC| |guidugli@gmail.com
--- Comment #4 from Carlos Guidugli <guidugli@gmail.com> ---
Hi,
I am also having the same issue with Fedora 22, kernel 4.1.3-200.fc22.x86_64.
Any recommendations?
[ 0.828869] ata9: SATA max UDMA/133 abar m2048@0xdf610000 port 0xdf610100
irq 35
[ 0.828873] ata10: SATA max UDMA/133 abar m2048@0xdf610000 port 0xdf610180
irq 35
[ 0.828877] ata11: SATA max UDMA/133 abar m2048@0xdf610000 port 0xdf610200
irq 35
[ 0.828880] ata12: SATA max UDMA/133 abar m2048@0xdf610000 port 0xdf610280
irq 35
[ 0.828884] ata13: SATA max UDMA/133 abar m2048@0xdf610000 port 0xdf610300
irq 35
[ 0.828887] ata14: SATA max UDMA/133 abar m2048@0xdf610000 port 0xdf610380
irq 35
[ 0.828890] ata15: SATA max UDMA/133 abar m2048@0xdf610000 port 0xdf610400
irq 35
[ 0.828894] ata16: SATA max UDMA/133 abar m2048@0xdf610000 port 0xdf610480
irq 35
[ 1.116331] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.117021] ata1.00: ATA-9: WDC WD60EFRX-68MYMN1, 82.00A82, max UDMA/133
[ 1.117026] ata1.00: 11721045168 sectors, multi 16: LBA48 NCQ (depth 31/32),
AA
[ 1.118349] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.119026] ata6.00: ATA-9: WDC WD60EFRX-68MYMN1, 82.00A82, max UDMA/133
[ 1.119031] ata6.00: 11721045168 sectors, multi 16: LBA48 NCQ (depth 31/32),
AA
[ 1.119341] ata8: SATA link down (SStatus 0 SControl 300)
[ 1.119346] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.119377] ata7: SATA link down (SStatus 0 SControl 300)
[ 1.119394] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.119413] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.119740] ata6.00: configured for UDMA/133
[ 1.120073] ata5.00: ATA-9: WDC WD60EFRX-68MYMN1, 82.00A82, max UDMA/133
[ 1.120078] ata5.00: 11721045168 sectors, multi 16: LBA48 NCQ (depth 31/32),
AA
[ 1.120798] ata5.00: configured for UDMA/133
[ 1.134350] ata14: SATA link down (SStatus 0 SControl 300)
[ 1.134376] ata16: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.134401] ata12: SATA link down (SStatus 0 SControl 300)
[ 1.134498] ata16.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66
[ 1.134652] ata16.00: configured for UDMA/66
[ 1.136354] ata15: SATA link down (SStatus 0 SControl 300)
[ 1.136379] ata10: SATA link down (SStatus 0 SControl 300)
[ 1.136403] ata11: SATA link down (SStatus 0 SControl 300)
[ 1.136425] ata9: SATA link down (SStatus 0 SControl 300)
[ 1.136446] ata13: SATA link down (SStatus 0 SControl 300)
[ 1.323489] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.327731] ata3.00: HPA detected: current 3907027055, native 3907029168
[ 1.327822] ata2.00: ATA-9: WDC WD60EFRX-68MYMN1, 82.00A82, max UDMA/133
[ 1.327827] ata2.00: 11721045168 sectors, multi 16: LBA48 NCQ (depth 31/32),
AA
[ 1.327839] ata3.00: ATA-8: WDC WD20EARS-00S8B1, 80.00A80, max UDMA/133
[ 1.327844] ata3.00: 3907027055 sectors, multi 16: LBA48 NCQ (depth 31/32),
AA
[ 1.327966] ata4.00: HPA detected: current 3907027055, native 3907029168
[ 1.328069] ata4.00: ATA-8: WDC WD20EARS-00S8B1, 80.00A80, max UDMA/133
[ 1.328073] ata4.00: 3907027055 sectors, multi 16: LBA48 NCQ (depth 31/32),
AA
[ 1.328281] ata1.00: configured for UDMA/133
[ 1.328518] scsi 0:0:0:0: Direct-Access ATA WDC WD60EFRX-68M 0A82
PQ: 0 ANSI: 5
[ 1.328620] ata2.00: configured for UDMA/133
[ 1.328965] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.329004] sd 0:0:0:0: [sda] 11721045168 512-byte logical blocks: (6.00
TB/5.45 TiB)
[ 1.329009] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.329214] sd 0:0:0:0: [sda] Write Protect is off
[ 1.329219] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.329250] scsi 1:0:0:0: Direct-Access ATA WDC WD60EFRX-68M 0A82
PQ: 0 ANSI: 5
[ 1.329348] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.329652] sd 1:0:0:0: [sdb] 11721045168 512-byte logical blocks: (6.00
TB/5.45 TiB)
[ 1.329657] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 1.329669] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.329782] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.329788] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.329880] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.332247] ata3.00: configured for UDMA/133
[ 1.332429] scsi 2:0:0:0: Direct-Access ATA WDC WD20EARS-00S 0A80
PQ: 0 ANSI: 5
[ 1.332811] sd 2:0:0:0: [sdc] 3907027055 512-byte logical blocks: (2.00
TB/1.81 TiB)
[ 1.332851] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 1.332899] sd 2:0:0:0: [sdc] Write Protect is off
[ 1.332905] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.332970] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.332977] ata4.00: configured for UDMA/133
[ 1.333102] scsi 3:0:0:0: Direct-Access ATA WDC WD20EARS-00S 0A80
PQ: 0 ANSI: 5
[ 1.333464] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 1.333469] sd 3:0:0:0: [sdd] 3907027055 512-byte logical blocks: (2.00
TB/1.81 TiB)
[ 1.333623] sd 3:0:0:0: [sdd] Write Protect is off
[ 1.333628] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 1.333674] scsi 4:0:0:0: Direct-Access ATA WDC WD60EFRX-68M 0A82
PQ: 0 ANSI: 5
[ 1.333677] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.333991] sd 4:0:0:0: Attached scsi generic sg4 type 0
[ 1.334035] sd 4:0:0:0: [sde] 11721045168 512-byte logical blocks: (6.00
TB/5.45 TiB)
[ 1.334040] sd 4:0:0:0: [sde] 4096-byte physical blocks
[ 1.334180] sd 4:0:0:0: [sde] Write Protect is off
[ 1.334185] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 1.334231] scsi 5:0:0:0: Direct-Access ATA WDC WD60EFRX-68M 0A82
PQ: 0 ANSI: 5
[ 1.334233] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.334527] sd 5:0:0:0: [sdf] 11721045168 512-byte logical blocks: (6.00
TB/5.45 TiB)
[ 1.334532] sd 5:0:0:0: [sdf] 4096-byte physical blocks
[ 1.334548] sd 5:0:0:0: Attached scsi generic sg5 type 0
[ 1.334647] sd 5:0:0:0: [sdf] Write Protect is off
[ 1.334653] sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00
[ 1.334768] sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.335031] scsi 15:0:0:0: Processor Marvell Console 1.01
PQ: 0 ANSI: 5
[ 1.346509] ata16.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 1.346662] ata16.00: irq_stat 0x40000001
[ 1.346796] ata16.00: cmd a0/01:00:00:00:01/00:00:00:00:00/a0 tag 2 dma
16640 in
Inquiry 12 01 00 00 ff 00res
00/00:00:00:00:00/00:00:00:00:00/00 Emask 0x3 (HSM violation)
[ 1.347344] ata16: hard resetting link
[ 1.350686] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.350688] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.354182] sd 5:0:0:0: [sdf] Attached SCSI disk
[ 1.355834] sd 4:0:0:0: [sde] Attached SCSI disk
[ 1.787613] sd 3:0:0:0: [sdd] Attached SCSI disk
[ 1.788180] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 1.832932] ata16: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.883536] ata16.00: configured for UDMA/66
[ 1.883621] ata16: EH complete
[ 1.883920] scsi 15:0:0:0: Attached scsi generic sg6 type 3
Have two Marvell controllers:
04:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9172 SATA 6Gb/s
Controller (rev 11)
09:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9230 PCIe SATA 6Gb/s
Controller (rev 11)
--
You are receiving this mail because:
You are watching the assignee of the bug.
next prev parent reply other threads:[~2015-08-08 23:58 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-12 22:22 [Bug 98171] New: [Regression] Marvell SE91xx SATA 3 controllers not recognized correctly bugzilla-daemon
2015-05-12 22:22 ` [Bug 98171] " bugzilla-daemon
2015-05-12 22:28 ` [Bug 98171] New: " James Bottomley
2015-06-29 22:27 ` [Bug 98171] " bugzilla-daemon
2015-06-30 10:48 ` bugzilla-daemon
2015-06-30 10:51 ` bugzilla-daemon
2015-08-08 23:58 ` bugzilla-daemon [this message]
2016-01-19 14:33 ` bugzilla-daemon
2016-02-02 8:01 ` bugzilla-daemon
2016-02-05 16:20 ` bugzilla-daemon
2016-03-29 3:34 ` bugzilla-daemon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bug-98171-11613-4XOxt2LUqe@https.bugzilla.kernel.org/ \
--to=bugzilla-daemon@bugzilla.kernel.org \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).