Re: [PATCH v2] USB:UAS:return ENODEV when submit urbs fail with device not attached.

[Oliver Neukum <oneukum@suse.com>]

On 28.02.24 12:15, Weitao Wang wrote:

Hi,

sorry for going at this again, but there are a few technical issues left.

	Regards
		Oliver

> ---
> v1->v2
>   - Modify the description of this patch.
> 
>   drivers/usb/storage/uas.c | 21 ++++++++++-----------
>   1 file changed, 10 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c
> index 9707f53cfda9..967f18db525a 100644
> --- a/drivers/usb/storage/uas.c
> +++ b/drivers/usb/storage/uas.c
   
> @@ -562,9 +561,9 @@ static int uas_submit_urbs(struct scsi_cmnd *cmnd,
>   
>   	lockdep_assert_held(&devinfo->lock);
>   	if (cmdinfo->state & SUBMIT_STATUS_URB) {
> -		urb = uas_submit_sense_urb(cmnd, GFP_ATOMIC);
> -		if (!urb)
> -			return SCSI_MLQUEUE_DEVICE_BUSY;
> +		err = uas_submit_sense_urb(cmnd, GFP_ATOMIC);
> +		if (err)
> +			return (err == -ENODEV) ? -ENODEV : SCSI_MLQUEUE_DEVICE_BUSY;

Either we ought to use SCSI error codes or generic error codes.
There is no need to translate all but one error condition here.

>   		cmdinfo->state &= ~SUBMIT_STATUS_URB;
>   	}
>   
> @@ -582,7 +581,7 @@ static int uas_submit_urbs(struct scsi_cmnd *cmnd,
>   		if (err) {
>   			usb_unanchor_urb(cmdinfo->data_in_urb);
>   			uas_log_cmd_state(cmnd, "data in submit err", err);
> -			return SCSI_MLQUEUE_DEVICE_BUSY;
> +			return (err == -ENODEV) ? -ENODEV : SCSI_MLQUEUE_DEVICE_BUSY;

Same as above and below.