From: merez@codeaurora.org
To: Subhash Jadavani <subhashj@codeaurora.org>
Cc: Seungwon Jeon <tgih.jun@samsung.com>,
linux-scsi@vger.kernel.org,
'Vinayak Holikatti' <vinholikatti@gmail.com>,
'Santosh Y' <santoshsy@gmail.com>,
"'James E.J. Bottomley'" <jbottomley@parallels.com>
Subject: Re: [PATCH 3/5] scsi: ufs: amend interrupt configuration
Date: Wed, 1 May 2013 00:50:58 -0700 [thread overview]
Message-ID: <fb37a9352bb31a10e42590c96971d82c.squirrel@www.codeaurora.org> (raw)
In-Reply-To: <517FB022.1060400@codeaurora.org>
Tested-by: Maya Erez <merez@codeaurora.org>
> Patch looks good but one minor comment below.
>
> On 4/24/2013 9:36 PM, Seungwon Jeon wrote:
>> It makes interrupt setting more flexible especially
>> for disabling. And wrong bit mask is fixed for ver 1.0.
>> [17:16] is added for mask.
>>
>> Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com>
>> ---
>> drivers/scsi/ufs/ufshcd.c | 86
>> ++++++++++++++++++++++++++++++++-------------
>> drivers/scsi/ufs/ufshcd.h | 4 +-
>> drivers/scsi/ufs/ufshci.h | 5 ++-
>> 3 files changed, 66 insertions(+), 29 deletions(-)
>>
>> diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
>> index b6c19b0..efe2256 100644
>> --- a/drivers/scsi/ufs/ufshcd.c
>> +++ b/drivers/scsi/ufs/ufshcd.c
>> @@ -35,6 +35,10 @@
>>
>> #include "ufshcd.h"
>>
>> +#define UFSHCD_ENABLE_INTRS (UTP_TRANSFER_REQ_COMPL |\
>> + UTP_TASK_REQ_COMPL |\
>> + UFSHCD_ERROR_MASK)
>> +
>
> I don't see any use of this macro in this patch. could you please remove
> it or move it to the patch-set where its really being used.
>
>> enum {
>> UFSHCD_MAX_CHANNEL = 0,
>> UFSHCD_MAX_ID = 1,
>> @@ -64,6 +68,20 @@ enum {
>> };
>>
>> /**
>> + * ufshcd_get_intr_mask - Get the interrupt bit mask
>> + * @hba - Pointer to adapter instance
>> + *
>> + * Returns interrupt bit mask per version
>> + */
>> +static inline u32 ufshcd_get_intr_mask(struct ufs_hba *hba)
>> +{
>> + if (hba->ufs_version == UFSHCI_VERSION_10)
>> + return INTERRUPT_MASK_ALL_VER_10;
>> + else
>> + return INTERRUPT_MASK_ALL_VER_11;
>> +}
>> +
>> +/**
>> * ufshcd_get_ufs_version - Get the UFS version supported by the HBA
>> * @hba - Pointer to adapter instance
>> *
>> @@ -397,25 +415,45 @@ static int ufshcd_map_sg(struct ufshcd_lrb *lrbp)
>> }
>>
>> /**
>> - * ufshcd_int_config - enable/disable interrupts
>> + * ufshcd_enable_intr - enable interrupts
>> * @hba: per adapter instance
>> - * @option: interrupt option
>> + * @intrs: interrupt bits
>> */
>> -static void ufshcd_int_config(struct ufs_hba *hba, u32 option)
>> +static void ufshcd_enable_intr(struct ufs_hba *hba, u32 intrs)
>> {
>> - switch (option) {
>> - case UFSHCD_INT_ENABLE:
>> - ufshcd_writel(hba, REG_INTERRUPT_ENABLE, hba->int_enable_mask);
>> - break;
>> - case UFSHCD_INT_DISABLE:
>> - if (hba->ufs_version == UFSHCI_VERSION_10)
>> - ufshcd_writel(hba, REG_INTERRUPT_ENABLE,
>> - INTERRUPT_DISABLE_MASK_10);
>> - else
>> - ufshcd_writel(hba, REG_INTERRUPT_ENABLE,
>> - INTERRUPT_DISABLE_MASK_11);
>> - break;
>> + u32 set = ufshcd_readl(hba, REG_INTERRUPT_ENABLE);
>> +
>> + if (hba->ufs_version == UFSHCI_VERSION_10) {
>> + u32 rw;
>> + rw = set & INTERRUPT_MASK_RW_VER_10;
>> + set = rw | ((set ^ intrs) & intrs);
>> + } else {
>> + set |= intrs;
>> + }
>> +
>> + ufshcd_writel(hba, REG_INTERRUPT_ENABLE, set);
>> +}
>> +
>> +/**
>> + * ufshcd_disable_intr - disable interrupts
>> + * @hba: per adapter instance
>> + * @intrs: interrupt bits
>> + */
>> +static void ufshcd_disable_intr(struct ufs_hba *hba, u32 intrs)
>> +{
>> + u32 set = ufshcd_readl(hba, REG_INTERRUPT_ENABLE);
>> +
>> + if (hba->ufs_version == UFSHCI_VERSION_10) {
>> + u32 rw;
>> + rw = (set & INTERRUPT_MASK_RW_VER_10) &
>> + ~(intrs & INTERRUPT_MASK_RW_VER_10);
>> + set = rw | ((set & intrs) & ~INTERRUPT_MASK_RW_VER_10);
>> +
>> + } else {
>> + set &= ~intrs;
>> }
>> +
>> + ufshcd_writel(hba, REG_INTERRUPT_ENABLE, set);
>> }
>>
>> /**
>> @@ -717,8 +755,7 @@ static int ufshcd_dme_link_startup(struct ufs_hba
>> *hba)
>> uic_cmd->argument3 = 0;
>>
>> /* enable UIC related interrupts */
>> - hba->int_enable_mask |= UIC_COMMAND_COMPL;
>> - ufshcd_int_config(hba, UFSHCD_INT_ENABLE);
>> + ufshcd_enable_intr(hba, UIC_COMMAND_COMPL);
>>
>> /* sending UIC commands to controller */
>> ufshcd_send_uic_command(hba, uic_cmd);
>> @@ -765,13 +802,9 @@ static int ufshcd_make_hba_operational(struct
>> ufs_hba *hba)
>> }
>>
>> /* Enable required interrupts */
>> - hba->int_enable_mask |= (UTP_TRANSFER_REQ_COMPL |
>> - UIC_ERROR |
>> - UTP_TASK_REQ_COMPL |
>> - DEVICE_FATAL_ERROR |
>> - CONTROLLER_FATAL_ERROR |
>> - SYSTEM_BUS_FATAL_ERROR);
>> - ufshcd_int_config(hba, UFSHCD_INT_ENABLE);
>> + ufshcd_enable_intr(hba, UTP_TRANSFER_REQ_COMPL | UIC_ERROR |
>> + UTP_TASK_REQ_COMPL | DEVICE_FATAL_ERROR |
>> + CONTROLLER_FATAL_ERROR | SYSTEM_BUS_FATAL_ERROR);
>>
>> /* Configure interrupt aggregation */
>> ufshcd_config_int_aggr(hba, INT_AGGR_CONFIG);
>> @@ -1578,7 +1611,7 @@ static void ufshcd_hba_free(struct ufs_hba *hba)
>> void ufshcd_remove(struct ufs_hba *hba)
>> {
>> /* disable interrupts */
>> - ufshcd_int_config(hba, UFSHCD_INT_DISABLE);
>> + ufshcd_disable_intr(hba, hba->intr_mask);
>>
>> ufshcd_hba_stop(hba);
>> ufshcd_hba_free(hba);
>> @@ -1636,6 +1669,9 @@ int ufshcd_init(struct device *dev, struct ufs_hba
>> **hba_handle,
>> /* Get UFS version supported by the controller */
>> hba->ufs_version = ufshcd_get_ufs_version(hba);
>>
>> + /* Get Interrupt bit mask per version */
>> + hba->intr_mask = ufshcd_get_intr_mask(hba);
>> +
>> /* Allocate memory for host memory space */
>> err = ufshcd_memory_alloc(hba);
>> if (err) {
>> diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
>> index 6728450..87d5a94 100644
>> --- a/drivers/scsi/ufs/ufshcd.h
>> +++ b/drivers/scsi/ufs/ufshcd.h
>> @@ -139,7 +139,7 @@ struct ufshcd_lrb {
>> * @ufshcd_tm_wait_queue: wait queue for task management
>> * @tm_condition: condition variable for task management
>> * @ufshcd_state: UFSHCD states
>> - * @int_enable_mask: Interrupt Mask Bits
>> + * @intr_mask: Interrupt Mask Bits
>> * @uic_workq: Work queue for UIC completion handling
>> * @feh_workq: Work queue for fatal controller error handling
>> * @errors: HBA errors
>> @@ -176,7 +176,7 @@ struct ufs_hba {
>> unsigned long tm_condition;
>>
>> u32 ufshcd_state;
>> - u32 int_enable_mask;
>> + u32 intr_mask;
>>
>> /* Work Queues */
>> struct work_struct uic_workq;
>> diff --git a/drivers/scsi/ufs/ufshci.h b/drivers/scsi/ufs/ufshci.h
>> index 0c16484..d5c5f14 100644
>> --- a/drivers/scsi/ufs/ufshci.h
>> +++ b/drivers/scsi/ufs/ufshci.h
>> @@ -232,10 +232,11 @@ enum {
>> /* Interrupt disable masks */
>> enum {
>> /* Interrupt disable mask for UFSHCI v1.0 */
>> - INTERRUPT_DISABLE_MASK_10 = 0xFFFF,
>> + INTERRUPT_MASK_ALL_VER_10 = 0x30FFF,
>> + INTERRUPT_MASK_RW_VER_10 = 0x30000,
>>
>> /* Interrupt disable mask for UFSHCI v1.1 */
>> - INTERRUPT_DISABLE_MASK_11 = 0x0,
>> + INTERRUPT_MASK_ALL_VER_11 = 0x31FFF,
>> };
>>
>> /*
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
Maya Erez
QUALCOMM ISRAEL, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
next prev parent reply other threads:[~2013-05-01 7:50 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-04-24 16:06 [PATCH 3/5] scsi: ufs: amend interrupt configuration Seungwon Jeon
2013-04-30 11:50 ` Subhash Jadavani
2013-05-01 7:50 ` merez [this message]
2013-05-02 7:00 ` Seungwon Jeon
2013-05-04 8:45 ` [PATCH v2 3/7] " Seungwon Jeon
2013-05-06 10:40 ` merez
2013-05-06 14:22 ` James Bottomley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=fb37a9352bb31a10e42590c96971d82c.squirrel@www.codeaurora.org \
--to=merez@codeaurora.org \
--cc=jbottomley@parallels.com \
--cc=linux-scsi@vger.kernel.org \
--cc=santoshsy@gmail.com \
--cc=subhashj@codeaurora.org \
--cc=tgih.jun@samsung.com \
--cc=vinholikatti@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox