From: Mathieu Chouquet-Stringer <ml2news@free.fr>
To: linux-scsi@vger.kernel.org
Subject: Dead Adaptec AHA-2940U2/U2W while ripping a CD
Date: 26 Jan 2006 18:39:13 +0100 [thread overview]
Message-ID: <m3acdi99dq.fsf_-_@localhost.localdomain> (raw)
In-Reply-To: <Pine.LNX.4.64.0601261138500.23310@localhost.localdomain>
Hello,
I was ripping a (copy protected) cd on my alpha and got the following
stuff (see below). At that point, the box failed to respond and because I
don't have a console, I rebooted it.
Kernel version is (vanilla 2.6.15):
Linux alpha 2.6.15 #1 Sat Jan 7 16:32:48 CET 2006 alpha EV56 EB164 GNU/Linux
Here's the lspci entry for the card:
01:01.0 SCSI storage controller: Adaptec AHA-2940U2/U2W
Subsystem: Adaptec AHA-2940U2 SCSI Controller
Flags: bus master, medium devsel, latency 32, IRQ 26
BIST result: 00
I/O ports at 9000 [disabled] [size=256]
Memory at 09200000 (64-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at 09640000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 1
If you want me to test anything let me know.
Cheers,
Jan 26 18:23:06 alpha sr 1:0:6:0: Attempting to queue an ABORT message
Jan 26 18:23:06 alpha CDB: 0xbe 0x4 0x0 0x2 0x78 0x11 0x0 0x0 0x5 0xf8 0x0 0x0
Jan 26 18:23:06 alpha scsi1: At time of recovery, card was not paused
Jan 26 18:23:06 alpha >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
Jan 26 18:23:06 alpha scsi1: Dumping Card State while idle, at SEQADDR 0x9
Jan 26 18:23:06 alpha Card was paused
Jan 26 18:23:06 alpha ACCUM = 0x0, SINDEX = 0x0, DINDEX = 0xe4, ARG_2 = 0x0
Jan 26 18:23:06 alpha HCNT = 0x0 SCBPTR = 0x1d
Jan 26 18:23:06 alpha SCSISIGI[0x0] ERROR[0x0] SCSIBUSL[0x0] LASTPHASE[0x1]:(P_BUSFREE)
Jan 26 18:23:06 alpha SCSISEQ[0x12]:(ENAUTOATNP|ENRSELI) SBLKCTL[0xa]:(SELWIDE|SELBUSB)
Jan 26 18:23:06 alpha SCSIRATE[0x0] SEQCTL[0x10]:(FASTMODE) SEQ_FLAGS[0xc0]:(NO_CDB_SENT|NOT_IDENTIFIED)
Jan 26 18:23:06 alpha SSTAT0[0x0] SSTAT1[0xa]:(PHASECHG|BUSFREE) SSTAT2[0x0]
Jan 26 18:23:06 alpha SSTAT3[0x0] SIMODE0[0x8]:(ENSWRAP) SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO)
Jan 26 18:23:06 alpha SXFRCTL0[0x80]:(DFON) DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
Jan 26 18:23:06 alpha STACK: 0x0 0x167 0x10d 0x3
Jan 26 18:23:06 alpha SCB count = 56
Jan 26 18:23:06 alpha Kernel NEXTQSCB = 19
Jan 26 18:23:06 alpha Card NEXTQSCB = 19
Jan 26 18:23:06 alpha QINFIFO entries:
Jan 26 18:23:06 alpha Waiting Queue entries:
Jan 26 18:23:06 alpha Disconnected Queue entries: 18:24
Jan 26 18:23:06 alpha QOUTFIFO entries:
Jan 26 18:23:06 alpha Sequencer Free SCB List: 29 0 24 13 5 10 6 8 21 19 4 11 1 7 23 26 15 9 12 28 3 31 25 16 27 17 30 20 22 14 2
Jan 26 18:23:06 alpha Sequencer SCB Info:
Jan 26 18:23:06 alpha 0 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x17]
Jan 26 18:23:06 alpha SCB_LUN[0x0] SCB_TAG[0xff]
Jan 26 18:23:06 alpha 1 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x17]
Jan 26 18:23:06 alpha SCB_LUN[0x0] SCB_TAG[0xff]
Jan 26 18:23:06 alpha 2 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x17]
Jan 26 18:23:06 alpha SCB_LUN[0x0] SCB_TAG[0xff]
Jan 26 18:23:06 alpha 3 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x7]
Jan 26 18:23:06 alpha SCB_LUN[0x0] SCB_TAG[0xff]
Jan 26 18:23:06 alpha 4 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x7]
Jan 26 18:23:06 alpha SCB_LUN[0x0] SCB_TAG[0xff]
Jan 26 18:23:06 alpha 5 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x7]
Jan 26 18:23:06 alpha SCB_LUN[0x0] SCB_TAG[0xff]
Jan 26 18:23:06 alpha 6 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x7]
Jan 26 18:23:06 alpha SCB_LUN[0x0] SCB_TAG[0xff]
Jan 26 18:23:06 alpha 7 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x7]
Jan 26 18:23:06 alpha SCB_LUN[0x0] SCB_TAG[0xff]
Jan 26 18:23:06 alpha 8 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x17]
Jan 26 18:23:06 alpha SCB_LUN[0x0] SCB_TAG[0xff]
Jan 26 18:23:06 alpha 9 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x17]
Jan 26 18:23:06 alpha SCB_LUN[0x0] SCB_TAG[0xff]
Jan 26 18:23:06 alpha 10 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x17]
Jan 26 18:23:06 alpha SCB_LUN[0x0] SCB_TAG[0xff]
Jan 26 18:23:06 alpha 11 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x7]
Jan 26 18:23:06 alpha SCB_LUN[0x0] SCB_TAG[0xff]
Jan 26 18:23:06 alpha 12 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x17]
Jan 26 18:23:06 alpha SCB_LUN[0x0] SCB_TAG[0xff]
Jan 26 18:23:06 alpha 13 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x17]
Jan 26 18:23:06 alpha SCB_LUN[0x0] SCB_TAG[0xff]
Jan 26 18:23:06 alpha 14 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x17]
Jan 26 18:23:06 alpha SCB_LUN[0x0] SCB_TAG[0xff]
Jan 26 18:23:06 alpha 15 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x7]
Jan 26 18:23:06 alpha SCB_LUN[0x0] SCB_TAG[0xff]
Jan 26 18:23:06 alpha 16 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x7]
Jan 26 18:23:06 alpha SCB_LUN[0x0] SCB_TAG[0xff]
Jan 26 18:23:06 alpha 17 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x7]
Jan 26 18:23:06 alpha SCB_LUN[0x0] SCB_TAG[0xff]
Jan 26 18:23:06 alpha 18 SCB_CONTROL[0x44]:(DISCONNECTED|DISCENB) SCB_SCSIID[0x67]
Jan 26 18:23:06 alpha SCB_LUN[0x0] SCB_TAG[0x18]
Jan 26 18:23:06 alpha 19 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x7]
Jan 26 18:23:06 alpha SCB_LUN[0x0] SCB_TAG[0xff]
Jan 26 18:23:06 alpha 20 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x17]
Jan 26 18:23:06 alpha SCB_LUN[0x0] SCB_TAG[0xff]
Jan 26 18:23:06 alpha 21 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x7]
Jan 26 18:23:06 alpha SCB_LUN[0x0] SCB_TAG[0xff]
Jan 26 18:23:06 alpha 22 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x17]
Jan 26 18:23:06 alpha SCB_LUN[0x0] SCB_TAG[0xff]
Jan 26 18:23:06 alpha 23 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x7]
Jan 26 18:23:06 alpha SCB_LUN[0x0] SCB_TAG[0xff]
Jan 26 18:23:06 alpha 24 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27]
Jan 26 18:23:06 alpha SCB_LUN[0x0] SCB_TAG[0xff]
Jan 26 18:23:06 alpha 25 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27]
Jan 26 18:23:06 alpha SCB_LUN[0x0] SCB_TAG[0xff]
Jan 26 18:23:06 alpha 26 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x7]
Jan 26 18:23:06 alpha SCB_LUN[0x0] SCB_TAG[0xff]
Jan 26 18:23:06 alpha 27 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x7]
Jan 26 18:23:06 alpha SCB_LUN[0x0] SCB_TAG[0xff]
Jan 26 18:23:06 alpha 28 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x7]
Jan 26 18:23:06 alpha SCB_LUN[0x0] SCB_TAG[0xff]
Jan 26 18:23:06 alpha 29 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x7]
Jan 26 18:23:06 alpha SCB_LUN[0x0] SCB_TAG[0xff]
Jan 26 18:23:06 alpha 30 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x7]
Jan 26 18:23:06 alpha SCB_LUN[0x0] SCB_TAG[0xff]
Jan 26 18:23:06 alpha 31 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x7]
Jan 26 18:23:06 alpha SCB_LUN[0x0] SCB_TAG[0xff]
Jan 26 18:23:06 alpha Pending list:
Jan 26 18:23:06 alpha 24 SCB_CONTROL[0x40]:(DISCENB) SCB_SCSIID[0x67] SCB_LUN[0x0]
Jan 26 18:23:06 alpha Kernel Free SCB list: 0 35 47 42 40 46 10 12 20 26 31 3 7 14 8 18 27 17 34 15 21 5 33 1 11 29 23 25 6 30 38 16 4 9 39 13 41 43 54 44 45 37 32 55 28 22 36 2 53 52 51 50 49 48
Jan 26 18:23:06 alpha Untagged Q(6): 24
Jan 26 18:23:06 alpha
Jan 26 18:23:06 alpha <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
Jan 26 18:23:06 alpha (scsi1:A:6:0): Device is disconnected, re-queuing SCB
Jan 26 18:23:06 alpha (scsi1:A:6:0): Abort Message Sent
Jan 26 18:23:06 alpha Recovery code sleeping
Jan 26 18:23:11 alpha Recovery code awake
Jan 26 18:23:11 alpha Timer Expired
Jan 26 18:23:11 alpha aic7xxx_abort returns 0x2003
Jan 26 18:23:11 alpha sr 1:0:6:0: Attempting to queue a TARGET RESET message
Jan 26 18:23:11 alpha CDB: 0xbe 0x4 0x0 0x2 0x78 0x11 0x0 0x0 0x5 0xf8 0x0 0x0
Jan 26 18:23:11 alpha aic7xxx_dev_reset returns 0x2003
Jan 26 18:23:11 alpha Recovery SCB completes
--
Mathieu Chouquet-Stringer
"Le disparu, si l'on vénère sa mémoire, est plus présent et
plus puissant que le vivant".
-- Antoine de Saint-Exupéry, Citadelle --
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2006-01-26 17:39 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-01-24 10:42 SCSI tape access on 2.6 kernels? Gerhard Schneider
2006-01-24 12:56 ` Gerhard Schneider
2006-01-24 17:52 ` Chip Coldwell
2006-01-24 20:23 ` Patrick Mansfield
2006-01-24 20:36 ` Chip Coldwell
2006-01-25 21:10 ` Kai Makisara
2006-01-26 16:11 ` Chip Coldwell
2006-01-26 16:39 ` Chip Coldwell
2006-01-26 17:39 ` Mathieu Chouquet-Stringer [this message]
2006-01-26 21:54 ` Kai Makisara
2006-01-27 15:40 ` Chip Coldwell
2006-01-27 17:56 ` Kai Makisara
2006-01-24 20:56 ` Kai Makisara
2006-01-24 20:58 ` Chip Coldwell
2006-01-24 21:01 ` Gerhard Schneider
2006-01-25 16:08 ` Chip Coldwell
2006-01-25 16:25 ` Denny Page
2006-01-25 19:03 ` Gerhard Schneider
2006-01-24 19:43 ` Denny Page
2006-01-24 20:50 ` Kai Makisara
2006-01-24 21:12 ` Gerhard Schneider
2006-01-25 21:26 ` Kai Makisara
-- strict thread matches above, loose matches on Subject: below --
2006-01-27 11:28 Dead Adaptec AHA-2940U2/U2W while ripping a CD emmanuel.fuste
2006-01-27 14:26 ` Mathieu Chouquet-Stringer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=m3acdi99dq.fsf_-_@localhost.localdomain \
--to=ml2news@free.fr \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox