From: sashiko-bot@kernel.org
To: "Brian Bunker" <brian@purestorage.com>
Cc: linux-scsi@vger.kernel.org
Subject: Re: [PATCH v6 2/5] scsi: core: Add scsi_update_inquiry_data() for updating INQUIRY data
Date: Mon, 12 Oct 2026 21:27:17 +0000 [thread overview]
Message-ID: <sashiko-outbox-168624@kernel.org> (raw)
In-Reply-To: <20261012210511.16061-3-brian@purestorage.com>
Thank you for your contribution! Sashiko AI review found 4 potential issue(s) to consider:
- [High] scsi: use-after-free on inquiry buffer for concurrent lockless readers
- [High] scsi: data race on struct scsi_device bitfields corrupts concurrent state updates
- [Medium] scsi: torn reads of INQUIRY strings in procfs and target during rescan
- [Medium] scsi: core: silent truncation of inq_len in scsi_update_inquiry_data()
--
commit 8e9aa2b82f339c1aae88807580c6d0982c8177fa
Author: Brian Bunker <brian@purestorage.com>
scsi: core: Add scsi_update_inquiry_data() for updating INQUIRY data
Add a new function scsi_update_inquiry_data() that can safely update all
INQUIRY-derived fields for an existing SCSI device:
- Vendor, model, revision strings
- Peripheral qualifier and device type
- Capability flags (removable, lockable, tagged queuing support, etc.)
- ATA device detection and allow_restart setting
> diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c
> index 3af9e77847f70..b80378ecf4856 100644
> --- a/drivers/scsi/scsi.c
> +++ b/drivers/scsi/scsi.c
[ ... ]
> @@ -549,6 +550,183 @@ void scsi_attach_vpd(struct scsi_device *sdev)
[ ... ]
> +int scsi_update_inquiry_data(struct scsi_device *sdev,
> + unsigned char *inq_result, size_t inq_len)
> +{
[ ... ]
> + had_prior_inquiry = (sdev->inquiry != NULL);
> + old_type = sdev->type;
> + old_periph_qual = sdev->inq_periph_qual;
> +
> + kfree(sdev->inquiry);
> + sdev->inquiry = new_inquiry;
> + sdev->inquiry_len = inq_len;
[Severity: High]
This frees and replaces the existing sdev->inquiry buffer dynamically on a
live device. However, there are multiple existing paths that read the inquiry
buffer locklessly, such as inline subsystem helpers in
include/scsi/scsi_device.h:
scsi_device_enclosure() {
return sdev->inquiry ? (sdev->inquiry[6] & (1<<6)) : 1;
}
Since these lockless readers do not acquire inquiry_mutex and there is no RCU
protection, can a concurrent I/O path or sysfs read dereference the freed
inquiry pointer, resulting in a use-after-free? Furthermore, do these
non-atomic updates to the pointer and its length expose lockless readers to
torn state?
[Severity: Medium]
sdev->inquiry_len is an unsigned char (8 bits), while inq_len is a size_t.
If a manual rescan passes an inq_len of 256, will this assignment silently
truncate the length to 0, causing the device's sysfs inquiry attribute to
return 0 bytes?
> + strscpy(sdev->vendor, sdev->inquiry + INQUIRY_VENDOR_OFFSET);
> + strscpy(sdev->model, sdev->inquiry + INQUIRY_MODEL_OFFSET);
> + /*
> + * memcpy() instead of strscpy() because strscpy() would read past
> + * the end of sdev->inquiry if its length is exactly 36 bytes.
> + */
> + memcpy(sdev->rev, sdev->inquiry + INQUIRY_REVISION_OFFSET,
> + INQUIRY_REVISION_LEN);
[Severity: Medium]
This patch makes the INQUIRY string arrays mutable at runtime. While the
updates are protected by inquiry_mutex, unprotected readers like procfs and
the PSCSI target read these character arrays without acquiring the newly
introduced inquiry_mutex:
proc_print_scsidevice() {
for (i = 0; i < 8; i++) {
if (sdev->vendor[i] >= 0x20)
...
}
Will unprotected readers race with these non-atomic strscpy() updates, causing
torn reads that expose mixed or garbled strings?
> + sdev->rev[INQUIRY_REVISION_LEN] = '\0';
> + sdev->inq_periph_qual = (inq_result[0] >> 5) & 7;
[ ... ]
> + /*
> + * Update device type from INQUIRY byte 0.
> + * BLIST_ISROM is a quirk for devices that report wrong type but should
> + * be treated as (removable) CD-ROM. Override to TYPE_ROM as exception.
> + */
> + if (sdev->sdev_bflags & BLIST_ISROM) {
> + sdev->type = TYPE_ROM;
> + sdev->removable = 1;
> + } else {
> + sdev->type = inq_result[0] & 0x1f;
> + sdev->removable = (inq_result[1] & 0x80) >> 7;
[Severity: High]
These assignments update capability bitfields (e.g., is_ata, removable,
lockable) on a live device while holding only inquiry_mutex. In
struct scsi_device, these capability bitfields are packed into the same memory
word as highly dynamic operational state bitfields:
unsigned is_ata:1;
unsigned removable:1;
unsigned changed:1; /* Data invalid due to media change */
unsigned busy:1; /* Used to prevent races */
Since other subsystems modify the operational bitfields without holding
inquiry_mutex (for example, scsi_test_unit_ready() sets sdev->changed = 1 in
softirq context), does this cause a non-atomic read-modify-write on the shared
word? Could this race overwrite and lose critical runtime state changes like
media change notifications?
--
Sashiko AI review · https://sashiko.dev/#/patchset/20261012210511.16061-1-brian@purestorage.com?part=2
next prev parent reply other threads:[~2026-10-12 21:27 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-12 21:05 [PATCH v6 0/5] scsi: Refresh INQUIRY data and reprobe on rescan Brian Bunker
2026-10-12 21:05 ` [PATCH v6 1/5] scsi: core: Protect INQUIRY sysfs attributes with mutex Brian Bunker
2026-10-12 21:05 ` [PATCH v6 2/5] scsi: core: Add scsi_update_inquiry_data() for updating INQUIRY data Brian Bunker
2026-10-12 21:27 ` sashiko-bot [this message]
2026-10-13 10:02 ` Damien Le Moal
2026-10-12 21:05 ` [PATCH v6 3/5] scsi: core: Refactor scsi_add_lun() to use scsi_update_inquiry_data() Brian Bunker
2026-10-12 21:27 ` sashiko-bot
2026-10-12 21:05 ` [PATCH v6 4/5] scsi: core: Add device reprobe support to scsi_rescan_device() Brian Bunker
2026-10-12 21:27 ` sashiko-bot
2026-10-12 21:05 ` [PATCH v6 5/5] scsi: core: Handle reprobe for existing devices during SCSI scan Brian Bunker
2026-10-12 21:24 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=sashiko-outbox-168624@kernel.org \
--to=sashiko-bot@kernel.org \
--cc=brian@purestorage.com \
--cc=linux-scsi@vger.kernel.org \
--cc=sashiko-reviews@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox