2.6.39-rc3-git3 problem etc , reset-resistent problem

["werner" <w.landgraf@ru.ru>]

[-- Attachment #1: Type: text/plain, Size: 1105 bytes --]

Enclosed pls find a screen foto of another crash with this 
reset-resistent problem.

As said, after patching blk and scsi in 2.6.39-rc3-git4 as 
someone suggested me to try out, happened crashs short  or 
longer time after booting, which caused a rather early 
crash during subsequent boots, which don't go away  even 
after re-set or power-off, and occurs again and again with 
2.6.39-rcX  .  This goes away only if I boot with 2.6.38.2 
or .3 ; in this case, if after this I boot again with 
2.6.39-rc3-git4+patches, then repeats the same, i.e. the 
first time it crashs only after the end of booting, but 
 subsequently again in the early stage.

I think this is a khugepaged problem, or that the computer 
wrongly interpretes the video card or anything else as an 
scsi or blk device.  At least subjectively, the sticking 
after booting is very similar to the khugepaged problem 
which I reclaimed during 2.6.38-rc1 (or was it .37-rc1 ), 
and which then was corrected, but perhaps it wasn't 
corrected really and now comes back.

W.Landgraf
---
Professional hosting for everyone - http://www.host.ru

[-- Attachment #2: Foto0050.jpg --]
[-- Type: image/jpeg, Size: 188550 bytes --]