[PATCH] qedi: Add ISCSI_BOOT_SYSFS to Kconfig

[PATCH] qedi: Add ISCSI_BOOT_SYSFS to Kconfig

[Nilesh Javali]

qedi uses iscsi_boot_sysfs to export the targets used
for boot to sysfs. Select the config option to make sure
the module is built.

This addresses the compile time issue,
    drivers/scsi/qedi/qedi_main.o: In function `qedi_remove':
    qedi_main.c:(.text+0x3bbd): undefined reference to `iscsi_boot_destroy_kset'
    drivers/scsi/qedi/qedi_main.o: In function `__qedi_probe.constprop.0':
    qedi_main.c:(.text+0x577a): undefined reference to `iscsi_boot_create_target'
    qedi_main.c:(.text+0x5807): undefined reference to `iscsi_boot_create_target'
    qedi_main.c:(.text+0x587f): undefined reference to `iscsi_boot_create_initiator'
    qedi_main.c:(.text+0x58f3): undefined reference to `iscsi_boot_create_ethernet'
    qedi_main.c:(.text+0x5927): undefined reference to `iscsi_boot_destroy_kset'
    qedi_main.c:(.text+0x5d7b): undefined reference to `iscsi_boot_create_host_kset'

Signed-off-by: Nilesh Javali <nilesh.javali@cavium.com>
---
 drivers/scsi/qedi/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/scsi/qedi/Kconfig b/drivers/scsi/qedi/Kconfig
index 2133145..6f3773f 100644
--- a/drivers/scsi/qedi/Kconfig
+++ b/drivers/scsi/qedi/Kconfig
@@ -5,6 +5,7 @@ config QEDI
 	select SCSI_ISCSI_ATTRS
 	select QED_LL2
 	select QED_ISCSI
+    select ISCSI_BOOT_SYSFS
 	---help---
 	This driver supports iSCSI offload for the QLogic FastLinQ
 	41000 Series Converged Network Adapters.
-- 
1.8.3.1

Re: [PATCH] qedi: Add ISCSI_BOOT_SYSFS to Kconfig

[Martin K. Petersen]

Nilesh,

> qedi uses iscsi_boot_sysfs to export the targets used for boot to
> sysfs. Select the config option to make sure the module is built.

Applied to 4.13/scsi-fixes. Whitespace was bad. Fixed.

-- 
Martin K. Petersen	Oracle Linux Engineering