linux-sctp.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Xin Long <lucien.xin@gmail.com>
To: network dev <netdev@vger.kernel.org>, linux-sctp@vger.kernel.org
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>,
	Neil Horman <nhorman@tuxdriver.com>,
	Vlad Yasevich <vyasevich@gmail.com>,
	davem@davemloft.net
Subject: [PATCHv6 net-next 3/6] sctp: add support for generating stream reconf ssn/tsn reset request chunk
Date: Wed, 08 Feb 2017 17:18:17 +0000	[thread overview]
Message-ID: <376d8794b81d7c5efe02b588ca381b88ed5f05ad.1486573728.git.lucien.xin@gmail.com> (raw)
In-Reply-To: <3d1180fcc5c72dea7d6cb7c7fafae4c4a7782cb3.1486573728.git.lucien.xin@gmail.com>

This patch is to define SSN/TSN Reset Request Parameter described
in rfc6525 section 4.3.

It's also to drop some unnecessary __packed in include/linux/sctp.h.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
---
 include/linux/sctp.h     |  5 +++++
 include/net/sctp/sm.h    |  2 ++
 net/sctp/sm_make_chunk.c | 29 +++++++++++++++++++++++++++++
 3 files changed, 36 insertions(+)

diff --git a/include/linux/sctp.h b/include/linux/sctp.h
index d74fca3..71c0d41 100644
--- a/include/linux/sctp.h
+++ b/include/linux/sctp.h
@@ -737,4 +737,9 @@ struct sctp_strreset_inreq {
 	__u16 list_of_streams[0];
 };
 
+struct sctp_strreset_tsnreq {
+	sctp_paramhdr_t param_hdr;
+	__u32 request_seq;
+};
+
 #endif /* __LINUX_SCTP_H__ */
diff --git a/include/net/sctp/sm.h b/include/net/sctp/sm.h
index 430ed13..ac37c17 100644
--- a/include/net/sctp/sm.h
+++ b/include/net/sctp/sm.h
@@ -265,6 +265,8 @@ struct sctp_chunk *sctp_make_strreset_req(
 				const struct sctp_association *asoc,
 				__u16 stream_num, __u16 *stream_list,
 				bool out, bool in);
+struct sctp_chunk *sctp_make_strreset_tsnreq(
+				const struct sctp_association *asoc);
 void sctp_chunk_assign_tsn(struct sctp_chunk *);
 void sctp_chunk_assign_ssn(struct sctp_chunk *);
 
diff --git a/net/sctp/sm_make_chunk.c b/net/sctp/sm_make_chunk.c
index c7d3249..749842a 100644
--- a/net/sctp/sm_make_chunk.c
+++ b/net/sctp/sm_make_chunk.c
@@ -3658,3 +3658,32 @@ struct sctp_chunk *sctp_make_strreset_req(
 
 	return retval;
 }
+
+/* RE-CONFIG 4.3 (SSN/TSN RESET ALL)
+ *   0                   1                   2                   3
+ *   0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+ *  +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ *  |     Parameter Type = 15       |      Parameter Length = 8     |
+ *  +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ *  |         Re-configuration Request Sequence Number              |
+ *  +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ */
+struct sctp_chunk *sctp_make_strreset_tsnreq(
+				const struct sctp_association *asoc)
+{
+	struct sctp_strreset_tsnreq tsnreq;
+	__u16 length = sizeof(tsnreq);
+	struct sctp_chunk *retval;
+
+	retval = sctp_make_reconf(asoc, length);
+	if (!retval)
+		return NULL;
+
+	tsnreq.param_hdr.type = SCTP_PARAM_RESET_TSN_REQUEST;
+	tsnreq.param_hdr.length = htons(length);
+	tsnreq.request_seq = htonl(asoc->strreset_outseq);
+
+	sctp_addto_chunk(retval, sizeof(tsnreq), &tsnreq);
+
+	return retval;
+}
-- 
2.1.0


  reply	other threads:[~2017-02-08 17:18 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-02-08 17:18 [PATCHv6 net-next 0/6] sctp: add sender-side procedures for stream reconf asoc reset and add streams Xin Long
2017-02-08 17:18 ` [PATCHv6 net-next 1/6] sctp: drop unnecessary __packed from some stream reconf structures Xin Long
2017-02-08 17:18   ` [PATCHv6 net-next 2/6] sctp: streams should be recovered when it fails to send request Xin Long
2017-02-08 17:18     ` Xin Long [this message]
2017-02-08 17:18       ` [PATCHv6 net-next 4/6] sctp: implement sender-side procedures for SSN/TSN Reset Request Parameter Xin Long
2017-02-08 17:18         ` [PATCHv6 net-next 5/6] sctp: add support for generating stream reconf add incoming/outgoing streams Xin Long
2017-02-08 17:18           ` [PATCHv6 net-next 6/6] sctp: implement sender-side procedures for Add Incoming/Outgoing Streams Requ Xin Long
2017-02-09 11:24             ` [PATCHv6 net-next 6/6] sctp: implement sender-side procedures for Add Incoming/Outgoing Streams Marcelo Ricardo Leitner
2017-02-09 11:23           ` [PATCHv6 net-next 5/6] sctp: add support for generating stream reconf add incoming/outgoing stre Marcelo Ricardo Leitner
2017-02-08 21:48         ` [PATCHv6 net-next 4/6] sctp: implement sender-side procedures for SSN/TSN Reset Request Paramete Marcelo Ricardo Leitner
2017-02-08 21:50           ` Marcelo Ricardo Leitner
2017-02-09  7:58             ` Xin Long
2017-02-09 11:23         ` Marcelo Ricardo Leitner
2017-02-08 21:57       ` [PATCHv6 net-next 3/6] sctp: add support for generating stream reconf ssn/tsn reset request chun Marcelo Ricardo Leitner
2017-02-09  7:56         ` Xin Long
2017-02-08 21:56     ` [PATCHv6 net-next 2/6] sctp: streams should be recovered when it fails to send request Marcelo Ricardo Leitner
2017-02-08 21:56   ` [PATCHv6 net-next 1/6] sctp: drop unnecessary __packed from some stream reconf structures Marcelo Ricardo Leitner
2017-02-09 12:30 ` [PATCHv6 net-next 0/6] sctp: add sender-side procedures for stream reconf asoc reset and add str Neil Horman
2017-02-09 21:58 ` David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=376d8794b81d7c5efe02b588ca381b88ed5f05ad.1486573728.git.lucien.xin@gmail.com \
    --to=lucien.xin@gmail.com \
    --cc=davem@davemloft.net \
    --cc=linux-sctp@vger.kernel.org \
    --cc=marcelo.leitner@gmail.com \
    --cc=netdev@vger.kernel.org \
    --cc=nhorman@tuxdriver.com \
    --cc=vyasevich@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).