linux-security-module.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Nageswara Sastry <rnsastry@linux.ibm.com>
To: Stefan Berger <stefanb@linux.vnet.ibm.com>, jarkko@kernel.org
Cc: nasastry@in.ibm.com, linux-integrity@vger.kernel.org,
	linux-security-module@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Stefan Berger <stefanb@linux.ibm.com>,
	Nayna Jain <nayna@linux.ibm.com>,
	George Wilson <gcwilson@linux.ibm.com>
Subject: Re: [PATCH v4 1/2] tpm: ibmvtpm: Avoid error message when process gets signal while waiting
Date: Tue, 10 Aug 2021 11:28:15 +0530	[thread overview]
Message-ID: <0047b861-c660-e126-a198-ebe77ca3c057@linux.ibm.com> (raw)
In-Reply-To: <20210809192159.2176580-2-stefanb@linux.vnet.ibm.com>



On 10/08/21 12:51 am, Stefan Berger wrote:
> From: Stefan Berger <stefanb@linux.ibm.com>
> 
> When rngd is run as root then lots of these types of message will appear
> in the kernel log if the TPM has been configured to provide random bytes:
> 
> [ 7406.275163] tpm tpm0: tpm_transmit: tpm_recv: error -4
> 
> The issue is caused by the following call that is interrupted while
> waiting for the TPM's response.
> 
> sig = wait_event_interruptible(ibmvtpm->wq, !ibmvtpm->tpm_processing_cmd);
> 
> Rather than waiting for the response in the low level driver, have it use
> the polling loop in tpm_try_transmit() that uses a command's duration to
> poll until a result has been returned by the TPM, thus ending when the
> timeout has occurred but not responding to signals and ctrl-c anymore. To
> stay in this polling loop extend tpm_ibmvtpm_status() to return
> 'true' for as long as the vTPM is indicated as being busy in
> tpm_processing_cmd. Since the loop requires the TPM's timeouts, get them
> now using tpm_get_timeouts() after setting the TPM2 version flag on the
> chip.
> 
> To recreat the resolved issue start rngd like this:
> 
> sudo rngd -r /dev/hwrng -t
> sudo rngd -r /dev/tpm0 -t
> 
> Link: https://bugzilla.redhat.com/show_bug.cgi?id=1981473
> Fixes: 6674ff145eef ("tpm_ibmvtpm: properly handle interrupted packet receptions")
> Cc: Nayna Jain <nayna@linux.ibm.com>
> Cc: George Wilson <gcwilson@linux.ibm.com>
> Reported-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
> Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>


Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com>

Tested with /dev/hwrng and /dev/tpm0 and not seen any tpm errors from 
the kernel.

> ---
>   drivers/char/tpm/tpm_ibmvtpm.c | 20 ++++++++++++--------
>   drivers/char/tpm/tpm_ibmvtpm.h |  2 +-
>   2 files changed, 13 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/char/tpm/tpm_ibmvtpm.c b/drivers/char/tpm/tpm_ibmvtpm.c
> index 903604769de9..7a9eca5768f8 100644
> --- a/drivers/char/tpm/tpm_ibmvtpm.c
> +++ b/drivers/char/tpm/tpm_ibmvtpm.c
> @@ -106,17 +106,12 @@ static int tpm_ibmvtpm_recv(struct tpm_chip *chip, u8 *buf, size_t count)
>   {
>   	struct ibmvtpm_dev *ibmvtpm = dev_get_drvdata(&chip->dev);
>   	u16 len;
> -	int sig;
>   
>   	if (!ibmvtpm->rtce_buf) {
>   		dev_err(ibmvtpm->dev, "ibmvtpm device is not ready\n");
>   		return 0;
>   	}
>   
> -	sig = wait_event_interruptible(ibmvtpm->wq, !ibmvtpm->tpm_processing_cmd);
> -	if (sig)
> -		return -EINTR;
> -
>   	len = ibmvtpm->res_len;
>   
>   	if (count < len) {
> @@ -269,7 +264,9 @@ static void tpm_ibmvtpm_cancel(struct tpm_chip *chip)
>   
>   static u8 tpm_ibmvtpm_status(struct tpm_chip *chip)
>   {
> -	return 0;
> +	struct ibmvtpm_dev *ibmvtpm = dev_get_drvdata(&chip->dev);
> +
> +	return ibmvtpm->tpm_processing_cmd;
>   }
>   
>   /**
> @@ -457,7 +454,7 @@ static const struct tpm_class_ops tpm_ibmvtpm = {
>   	.send = tpm_ibmvtpm_send,
>   	.cancel = tpm_ibmvtpm_cancel,
>   	.status = tpm_ibmvtpm_status,
> -	.req_complete_mask = 0,
> +	.req_complete_mask = true,
>   	.req_complete_val = 0,
>   	.req_canceled = tpm_ibmvtpm_req_canceled,
>   };
> @@ -688,8 +685,15 @@ static int tpm_ibmvtpm_probe(struct vio_dev *vio_dev,
>   		goto init_irq_cleanup;
>   	}
>   
> -	if (!strcmp(id->compat, "IBM,vtpm20")) {
> +
> +	if (!strcmp(id->compat, "IBM,vtpm20"))
>   		chip->flags |= TPM_CHIP_FLAG_TPM2;
> +
> +	rc = tpm_get_timeouts(chip);
> +	if (rc)
> +		goto init_irq_cleanup;
> +
> +	if (chip->flags & TPM_CHIP_FLAG_TPM2) {
>   		rc = tpm2_get_cc_attrs_tbl(chip);
>   		if (rc)
>   			goto init_irq_cleanup;
> diff --git a/drivers/char/tpm/tpm_ibmvtpm.h b/drivers/char/tpm/tpm_ibmvtpm.h
> index b92aa7d3e93e..51198b137461 100644
> --- a/drivers/char/tpm/tpm_ibmvtpm.h
> +++ b/drivers/char/tpm/tpm_ibmvtpm.h
> @@ -41,7 +41,7 @@ struct ibmvtpm_dev {
>   	wait_queue_head_t wq;
>   	u16 res_len;
>   	u32 vtpm_version;
> -	bool tpm_processing_cmd;
> +	u8 tpm_processing_cmd;
>   };
>   
>   #define CRQ_RES_BUF_SIZE	PAGE_SIZE
> 

-- 
Thanks and Regards
R.Nageswara Sastry

  reply	other threads:[~2021-08-10  5:58 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-09 19:21 [PATCH v4 0/2] ibmvtpm: Avoid error message when process gets signal while waiting Stefan Berger
2021-08-09 19:21 ` [PATCH v4 1/2] tpm: " Stefan Berger
2021-08-10  5:58   ` Nageswara Sastry [this message]
2021-08-09 19:21 ` [PATCH v4 2/2] tpm: ibmvtpm: Rename tpm_process_cmd to tpm_status and define flag Stefan Berger
2021-08-10 17:58   ` Jarkko Sakkinen
2021-08-11  1:50     ` Stefan Berger
2021-08-11  2:10       ` Jarkko Sakkinen
2021-08-11 12:15         ` Stefan Berger
2021-08-12 19:48           ` Jarkko Sakkinen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=0047b861-c660-e126-a198-ebe77ca3c057@linux.ibm.com \
    --to=rnsastry@linux.ibm.com \
    --cc=gcwilson@linux.ibm.com \
    --cc=jarkko@kernel.org \
    --cc=linux-integrity@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-security-module@vger.kernel.org \
    --cc=nasastry@in.ibm.com \
    --cc=nayna@linux.ibm.com \
    --cc=stefanb@linux.ibm.com \
    --cc=stefanb@linux.vnet.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).