Linux Security Modules development
 help / color / mirror / Atom feed
From: Maximilian Heyne <mheyne@amazon.de>
To: <stable@vger.kernel.org>
Cc: "Maximilian Heyne" <mheyne@amazon.de>,
	"Matthieu Buffet" <matthieu@buffet.re>,
	"Mickaël Salaün" <mic@digikod.net>,
	"Günther Noack" <gnoack@google.com>,
	"Paul Moore" <paul@paul-moore.com>,
	"James Morris" <jmorris@namei.org>,
	"Serge E. Hallyn" <serge@hallyn.com>,
	"Konstantin Meskhidze" <konstantin.meskhidze@huawei.com>,
	linux-security-module@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH 6.12.y] landlock: Fix TCP handling of short AF_UNSPEC addresses
Date: Thu, 28 May 2026 12:14:26 +0000	[thread overview]
Message-ID: <20260528-spice-spiral-4cde3d3b@mheyne-amazon> (raw)

From: Matthieu Buffet <matthieu@buffet.re>

[ Upstream commit e4d82cbce2258f454634307fdabf33aa46b61ab0 ]

current_check_access_socket() treats AF_UNSPEC addresses as
AF_INET ones, and only later adds special case handling to
allow connect(AF_UNSPEC), and on IPv4 sockets
bind(AF_UNSPEC+INADDR_ANY).
This would be fine except AF_UNSPEC addresses can be as
short as a bare AF_UNSPEC sa_family_t field, and nothing
more. The AF_INET code path incorrectly enforces a length of
sizeof(struct sockaddr_in) instead.

Move AF_UNSPEC edge case handling up inside the switch-case,
before the address is (potentially incorrectly) treated as
AF_INET.

Fixes: fff69fb03dde ("landlock: Support network rules with TCP bind and connect")
Signed-off-by: Matthieu Buffet <matthieu@buffet.re>
Link: https://lore.kernel.org/r/20251027190726.626244-4-matthieu@buffet.re
Signed-off-by: Mickaël Salaün <mic@digikod.net>
[ There was a conflict due to missing commit 9f74411a40ce ("landlock:
  Log TCP bind and connect denials") ]
Signed-off-by: Maximilian Heyne <mheyne@amazon.de>
---

Backporting this because landlock/net_test deterministically fails as
the selftest from the patch series "Fix TCP short AF_UNSPEC handling"
(https://lore.kernel.org/all/20251027190726.626244-1-matthieu@buffet.re/)
has been backported to 6.12 but not this patch due to conflicts.

---

 security/landlock/net.c | 118 +++++++++++++++++++++++-----------------
 1 file changed, 67 insertions(+), 51 deletions(-)

diff --git a/security/landlock/net.c b/security/landlock/net.c
index 104b6c01fe503..53d479893475f 100644
--- a/security/landlock/net.c
+++ b/security/landlock/net.c
@@ -72,6 +72,61 @@ static int current_check_access_socket(struct socket *const sock,
 
 	switch (address->sa_family) {
 	case AF_UNSPEC:
+		if (access_request == LANDLOCK_ACCESS_NET_CONNECT_TCP) {
+			/*
+			 * Connecting to an address with AF_UNSPEC dissolves
+			 * the TCP association, which have the same effect as
+			 * closing the connection while retaining the socket
+			 * object (i.e., the file descriptor).  As for dropping
+			 * privileges, closing connections is always allowed.
+			 *
+			 * For a TCP access control system, this request is
+			 * legitimate. Let the network stack handle potential
+			 * inconsistencies and return -EINVAL if needed.
+			 */
+			return 0;
+		} else if (access_request == LANDLOCK_ACCESS_NET_BIND_TCP) {
+			/*
+			 * Binding to an AF_UNSPEC address is treated
+			 * differently by IPv4 and IPv6 sockets. The socket's
+			 * family may change under our feet due to
+			 * setsockopt(IPV6_ADDRFORM), but that's ok: we either
+			 * reject entirely or require
+			 * %LANDLOCK_ACCESS_NET_BIND_TCP for the given port, so
+			 * it cannot be used to bypass the policy.
+			 *
+			 * IPv4 sockets map AF_UNSPEC to AF_INET for
+			 * retrocompatibility for bind accesses, only if the
+			 * address is INADDR_ANY (cf. __inet_bind). IPv6
+			 * sockets always reject it.
+			 *
+			 * Checking the address is required to not wrongfully
+			 * return -EACCES instead of -EAFNOSUPPORT or -EINVAL.
+			 * We could return 0 and let the network stack handle
+			 * these checks, but it is safer to return a proper
+			 * error and test consistency thanks to kselftest.
+			 */
+			if (sock->sk->__sk_common.skc_family == AF_INET) {
+				const struct sockaddr_in *const sockaddr =
+					(struct sockaddr_in *)address;
+
+				if (addrlen < sizeof(struct sockaddr_in))
+					return -EINVAL;
+
+				if (sockaddr->sin_addr.s_addr !=
+				    htonl(INADDR_ANY))
+					return -EAFNOSUPPORT;
+			} else {
+				if (addrlen < SIN6_LEN_RFC2133)
+					return -EINVAL;
+				else
+					return -EAFNOSUPPORT;
+			}
+		} else {
+			WARN_ON_ONCE(1);
+		}
+		/* Only for bind(AF_UNSPEC+INADDR_ANY) on IPv4 socket. */
+		fallthrough;
 	case AF_INET:
 		if (addrlen < sizeof(struct sockaddr_in))
 			return -EINVAL;
@@ -90,57 +145,18 @@ static int current_check_access_socket(struct socket *const sock,
 		return 0;
 	}
 
-	/* Specific AF_UNSPEC handling. */
-	if (address->sa_family == AF_UNSPEC) {
-		/*
-		 * Connecting to an address with AF_UNSPEC dissolves the TCP
-		 * association, which have the same effect as closing the
-		 * connection while retaining the socket object (i.e., the file
-		 * descriptor).  As for dropping privileges, closing
-		 * connections is always allowed.
-		 *
-		 * For a TCP access control system, this request is legitimate.
-		 * Let the network stack handle potential inconsistencies and
-		 * return -EINVAL if needed.
-		 */
-		if (access_request == LANDLOCK_ACCESS_NET_CONNECT_TCP)
-			return 0;
-
-		/*
-		 * For compatibility reason, accept AF_UNSPEC for bind
-		 * accesses (mapped to AF_INET) only if the address is
-		 * INADDR_ANY (cf. __inet_bind).  Checking the address is
-		 * required to not wrongfully return -EACCES instead of
-		 * -EAFNOSUPPORT.
-		 *
-		 * We could return 0 and let the network stack handle these
-		 * checks, but it is safer to return a proper error and test
-		 * consistency thanks to kselftest.
-		 */
-		if (access_request == LANDLOCK_ACCESS_NET_BIND_TCP) {
-			/* addrlen has already been checked for AF_UNSPEC. */
-			const struct sockaddr_in *const sockaddr =
-				(struct sockaddr_in *)address;
-
-			if (sock->sk->__sk_common.skc_family != AF_INET)
-				return -EINVAL;
-
-			if (sockaddr->sin_addr.s_addr != htonl(INADDR_ANY))
-				return -EAFNOSUPPORT;
-		}
-	} else {
-		/*
-		 * Checks sa_family consistency to not wrongfully return
-		 * -EACCES instead of -EINVAL.  Valid sa_family changes are
-		 * only (from AF_INET or AF_INET6) to AF_UNSPEC.
-		 *
-		 * We could return 0 and let the network stack handle this
-		 * check, but it is safer to return a proper error and test
-		 * consistency thanks to kselftest.
-		 */
-		if (address->sa_family != sock->sk->__sk_common.skc_family)
-			return -EINVAL;
-	}
+	/*
+	 * Checks sa_family consistency to not wrongfully return
+	 * -EACCES instead of -EINVAL.  Valid sa_family changes are
+	 * only (from AF_INET or AF_INET6) to AF_UNSPEC.
+	 *
+	 * We could return 0 and let the network stack handle this
+	 * check, but it is safer to return a proper error and test
+	 * consistency thanks to kselftest.
+	 */
+	if (address->sa_family != sock->sk->__sk_common.skc_family &&
+	    address->sa_family != AF_UNSPEC)
+		return -EINVAL;
 
 	id.key.data = (__force uintptr_t)port;
 	BUILD_BUG_ON(sizeof(port) > sizeof(id.key.data));
-- 
2.50.1




Amazon Web Services Development Center Germany GmbH
Tamara-Danz-Str. 13
10243 Berlin
Geschaeftsfuehrung: Christof Hellmis, Andreas Stieger
Eingetragen am Amtsgericht Charlottenburg unter HRB 257764 B
Sitz: Berlin
Ust-ID: DE 365 538 597

                 reply	other threads:[~2026-05-28 12:14 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260528-spice-spiral-4cde3d3b@mheyne-amazon \
    --to=mheyne@amazon.de \
    --cc=gnoack@google.com \
    --cc=jmorris@namei.org \
    --cc=konstantin.meskhidze@huawei.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-security-module@vger.kernel.org \
    --cc=matthieu@buffet.re \
    --cc=mic@digikod.net \
    --cc=paul@paul-moore.com \
    --cc=serge@hallyn.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox