linux-security-module.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Mimi Zohar <zohar@linux.ibm.com>
To: Roberto Sassu <roberto.sassu@huawei.com>, mjg59@google.com
Cc: linux-integrity@vger.kernel.org,
	linux-security-module@vger.kernel.org,
	linux-kernel@vger.kernel.org, silviu.vlasceanu@huawei.com
Subject: Re: [PATCH v2 11/12] ima: Introduce template field evmsig and write to field sig as fallback
Date: Thu, 17 Sep 2020 10:25:08 -0400	[thread overview]
Message-ID: <c8d3c70e74e607a4b73239bef1e9db0d304200fc.camel@linux.ibm.com> (raw)
In-Reply-To: <20200904092643.20013-7-roberto.sassu@huawei.com>

Hi Roberto,

On Fri, 2020-09-04 at 11:26 +0200, Roberto Sassu wrote:
> With the patch to accept EVM portable signatures when the
> appraise_type=imasig requirement is specified in the policy, appraisal can
> be successfully done even if the file does not have an IMA signature.
> 
> However, remote attestation would not see that a different signature type
> was used, as only IMA signatures can be included in the measurement list.
> This patch solves the issue by introducing the new template field 'evmsig'
> to show EVM portable signatures and by including its value in the existing
> field 'sig' if the IMA signature is not found.
> 
> Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
> Suggested-by: Mimi Zohar <zohar@linux.ibm.com>

Thank you!   Just a minor comment below.

<snip>

> diff --git a/security/integrity/ima/ima_template_lib.c b/security/integrity/ima/ima_template_lib.c
> index c022ee9e2a4e..2c596c2a89cc 100644
> --- a/security/integrity/ima/ima_template_lib.c
> +++ b/security/integrity/ima/ima_template_lib.c
> 
> @@ -438,7 +439,7 @@ int ima_eventsig_init(struct ima_event_data *event_data,
>  	struct evm_ima_xattr_data *xattr_value = event_data->xattr_value;
>  
>  	if ((!xattr_value) || (xattr_value->type != EVM_IMA_XATTR_DIGSIG))
> -		return 0;
> +		return ima_eventevmsig_init(event_data, field_data);
>  
>  	return ima_write_template_field_data(xattr_value, event_data->xattr_len,
>  					     DATA_FMT_HEX, field_data);
> @@ -484,3 +485,39 @@ int ima_eventmodsig_init(struct ima_event_data *event_data,
>  	return ima_write_template_field_data(data, data_len, DATA_FMT_HEX,
>  					     field_data);
>  }
> +
> +/*
> + *  ima_eventevmsig_init - include the EVM portable signature as part of the
> + *  template data
> + */
> +int ima_eventevmsig_init(struct ima_event_data *event_data,
> +			 struct ima_field_data *field_data)
> +{
> +	struct evm_ima_xattr_data *xattr_data = NULL;
> +	int rc = 0;
> +
> +	if (!event_data->file)
> +		return 0;
> +
> +	if (!(file_inode(event_data->file)->i_opflags & IOP_XATTR))
> +		return 0;
> +
> +	rc = vfs_getxattr_alloc(file_dentry(event_data->file), XATTR_NAME_EVM,
> +				(char **)&xattr_data, 0, GFP_NOFS);
> +	if (rc <= 0) {
> +		if (!rc || rc == -ENODATA)
> +			return 0;
> +
> +		return rc;

We're including the EVM signature on a best effort basis to help with
attestation.  Do we really care why it failed?   Are we going to act on
it?

Mimi

> +	}
> +
> +	if (xattr_data->type != EVM_XATTR_PORTABLE_DIGSIG) {
> +		kfree(xattr_data);
> +		return 0;
> +	}
> +
> +	rc = ima_write_template_field_data((char *)xattr_data, rc, DATA_FMT_HEX,
> +					   field_data);
> +	kfree(xattr_data);
> +	return rc;
> +}



  reply	other threads:[~2020-09-17 14:43 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-04  9:23 [PATCH v2 00/12] IMA/EVM fixes Roberto Sassu
2020-09-04  9:23 ` [PATCH v2 01/12] ima: Don't ignore errors from crypto_shash_update() Roberto Sassu
2020-09-04  9:23 ` [PATCH v2 02/12] ima: Remove semicolon at the end of ima_get_binary_runtime_size() Roberto Sassu
2020-09-04  9:23 ` [PATCH v2 03/12] evm: Check size of security.evm before using it Roberto Sassu
2020-09-04  9:23 ` [PATCH v2 04/12] evm: Execute evm_inode_init_security() only when the HMAC key is loaded Roberto Sassu
2020-09-16 16:15   ` Mimi Zohar
2020-09-04  9:26 ` [PATCH v2 05/12] evm: Load EVM key in ima_load_x509() to avoid appraisal Roberto Sassu
2020-09-04  9:26 ` [PATCH v2 06/12] evm: Refuse EVM_ALLOW_METADATA_WRITES only if the HMAC key is loaded Roberto Sassu
2020-09-04  9:26 ` [PATCH v2 07/12] evm: Introduce EVM_RESET_STATUS atomic flag Roberto Sassu
2020-09-17 12:01   ` Mimi Zohar
2020-09-17 17:36     ` Roberto Sassu
2020-09-17 17:47       ` Mimi Zohar
2020-09-04  9:26 ` [PATCH v2 08/12] evm: Allow xattr/attr operations for portable signatures if check fails Roberto Sassu
2020-09-17 12:32   ` Mimi Zohar
2020-09-04  9:26 ` [PATCH v2 09/12] evm: Allow setxattr() and setattr() if metadata digest won't change Roberto Sassu
2020-09-17 13:15   ` Mimi Zohar
2020-09-04  9:26 ` [PATCH v2 10/12] ima: Allow imasig requirement to be satisfied by EVM portable signatures Roberto Sassu
2020-09-04  9:26 ` [PATCH v2 11/12] ima: Introduce template field evmsig and write to field sig as fallback Roberto Sassu
2020-09-17 14:25   ` Mimi Zohar [this message]
2020-09-17 15:05     ` Roberto Sassu
2020-09-17 15:55       ` Mimi Zohar
2020-09-04  9:26 ` [PATCH v2 12/12] ima: Don't remove security.ima if file must not be appraised Roberto Sassu
2020-09-16 16:14 ` [PATCH v2 00/12] IMA/EVM fixes Mimi Zohar
2020-09-17 14:33   ` Mimi Zohar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=c8d3c70e74e607a4b73239bef1e9db0d304200fc.camel@linux.ibm.com \
    --to=zohar@linux.ibm.com \
    --cc=linux-integrity@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-security-module@vger.kernel.org \
    --cc=mjg59@google.com \
    --cc=roberto.sassu@huawei.com \
    --cc=silviu.vlasceanu@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).