From: Jamie Iles <jamie@jamieiles.com>
To: linux-serial@vger.kernel.org
Cc: Jamie Iles <jamie@jamieiles.com>, Greg KH <greg@kroah.com>
Subject: [PATCH 1/2] 8250: use container_of() instead of casting
Date: Wed, 1 Dec 2010 23:39:35 +0000 [thread overview]
Message-ID: <1291246776-805-1-git-send-email-jamie@jamieiles.com> (raw)
In-Reply-To: <20101201192728.GB31841@kroah.com>
The 8250 driver structure uart_8250_port took advantage of the fact
that the struct uart_port was the first member of its structure and
used an explicit cast to convert to the derived class. Replace the
explicit casts with container_of() for safety and clarity.
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Jamie Iles <jamie@jamieiles.com>
---
drivers/serial/8250.c | 60 ++++++++++++++++++++++++++++++++----------------
1 files changed, 40 insertions(+), 20 deletions(-)
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 4d8e14b..0b4ce47 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -461,7 +461,8 @@ static void dwapb_serial_out(struct uart_port *p, int offset, int value)
/* Save the LCR value so it can be re-written when a
* Busy Detect interrupt occurs. */
if (save_offset == UART_LCR) {
- struct uart_8250_port *up = (struct uart_8250_port *)p;
+ struct uart_8250_port *up =
+ container_of(p, struct uart_8250_port, port);
up->lcr = value;
}
writeb(value, p->membase + offset);
@@ -485,7 +486,8 @@ static void io_serial_out(struct uart_port *p, int offset, int value)
static void set_io_from_upio(struct uart_port *p)
{
- struct uart_8250_port *up = (struct uart_8250_port *)p;
+ struct uart_8250_port *up =
+ container_of(p, struct uart_8250_port, port);
switch (p->iotype) {
case UPIO_HUB6:
p->serial_in = hub6_serial_in;
@@ -1319,7 +1321,8 @@ static inline void __stop_tx(struct uart_8250_port *p)
static void serial8250_stop_tx(struct uart_port *port)
{
- struct uart_8250_port *up = (struct uart_8250_port *)port;
+ struct uart_8250_port *up =
+ container_of(port, struct uart_8250_port, port);
__stop_tx(up);
@@ -1336,7 +1339,8 @@ static void transmit_chars(struct uart_8250_port *up);
static void serial8250_start_tx(struct uart_port *port)
{
- struct uart_8250_port *up = (struct uart_8250_port *)port;
+ struct uart_8250_port *up =
+ container_of(port, struct uart_8250_port, port);
if (!(up->ier & UART_IER_THRI)) {
up->ier |= UART_IER_THRI;
@@ -1364,7 +1368,8 @@ static void serial8250_start_tx(struct uart_port *port)
static void serial8250_stop_rx(struct uart_port *port)
{
- struct uart_8250_port *up = (struct uart_8250_port *)port;
+ struct uart_8250_port *up =
+ container_of(port, struct uart_8250_port, port);
up->ier &= ~UART_IER_RLSI;
up->port.read_status_mask &= ~UART_LSR_DR;
@@ -1373,7 +1378,8 @@ static void serial8250_stop_rx(struct uart_port *port)
static void serial8250_enable_ms(struct uart_port *port)
{
- struct uart_8250_port *up = (struct uart_8250_port *)port;
+ struct uart_8250_port *up =
+ container_of(port, struct uart_8250_port, port);
/* no MSR capabilities */
if (up->bugs & UART_BUG_NOMSR)
@@ -1781,7 +1787,8 @@ static void serial8250_backup_timeout(unsigned long data)
static unsigned int serial8250_tx_empty(struct uart_port *port)
{
- struct uart_8250_port *up = (struct uart_8250_port *)port;
+ struct uart_8250_port *up =
+ container_of(port, struct uart_8250_port, port);
unsigned long flags;
unsigned int lsr;
@@ -1795,7 +1802,8 @@ static unsigned int serial8250_tx_empty(struct uart_port *port)
static unsigned int serial8250_get_mctrl(struct uart_port *port)
{
- struct uart_8250_port *up = (struct uart_8250_port *)port;
+ struct uart_8250_port *up =
+ container_of(port, struct uart_8250_port, port);
unsigned int status;
unsigned int ret;
@@ -1815,7 +1823,8 @@ static unsigned int serial8250_get_mctrl(struct uart_port *port)
static void serial8250_set_mctrl(struct uart_port *port, unsigned int mctrl)
{
- struct uart_8250_port *up = (struct uart_8250_port *)port;
+ struct uart_8250_port *up =
+ container_of(port, struct uart_8250_port, port);
unsigned char mcr = 0;
if (mctrl & TIOCM_RTS)
@@ -1836,7 +1845,8 @@ static void serial8250_set_mctrl(struct uart_port *port, unsigned int mctrl)
static void serial8250_break_ctl(struct uart_port *port, int break_state)
{
- struct uart_8250_port *up = (struct uart_8250_port *)port;
+ struct uart_8250_port *up =
+ container_of(port, struct uart_8250_port, port);
unsigned long flags;
spin_lock_irqsave(&up->port.lock, flags);
@@ -1890,7 +1900,8 @@ static void wait_for_xmitr(struct uart_8250_port *up, int bits)
static int serial8250_get_poll_char(struct uart_port *port)
{
- struct uart_8250_port *up = (struct uart_8250_port *)port;
+ struct uart_8250_port *up =
+ container_of(port, struct uart_8250_port, port);
unsigned char lsr = serial_inp(up, UART_LSR);
if (!(lsr & UART_LSR_DR))
@@ -1904,7 +1915,8 @@ static void serial8250_put_poll_char(struct uart_port *port,
unsigned char c)
{
unsigned int ier;
- struct uart_8250_port *up = (struct uart_8250_port *)port;
+ struct uart_8250_port *up =
+ container_of(port, struct uart_8250_port, port);
/*
* First save the IER then disable the interrupts
@@ -1938,7 +1950,8 @@ static void serial8250_put_poll_char(struct uart_port *port,
static int serial8250_startup(struct uart_port *port)
{
- struct uart_8250_port *up = (struct uart_8250_port *)port;
+ struct uart_8250_port *up =
+ container_of(port, struct uart_8250_port, port);
unsigned long flags;
unsigned char lsr, iir;
int retval;
@@ -2166,7 +2179,8 @@ dont_test_tx_en:
static void serial8250_shutdown(struct uart_port *port)
{
- struct uart_8250_port *up = (struct uart_8250_port *)port;
+ struct uart_8250_port *up =
+ container_of(port, struct uart_8250_port, port);
unsigned long flags;
/*
@@ -2235,7 +2249,8 @@ void
serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
struct ktermios *old)
{
- struct uart_8250_port *up = (struct uart_8250_port *)port;
+ struct uart_8250_port *up =
+ container_of(port, struct uart_8250_port, port);
unsigned char cval, fcr = 0;
unsigned long flags;
unsigned int baud, quot;
@@ -2435,7 +2450,8 @@ serial8250_set_ldisc(struct uart_port *port, int new)
void serial8250_do_pm(struct uart_port *port, unsigned int state,
unsigned int oldstate)
{
- struct uart_8250_port *p = (struct uart_8250_port *)port;
+ struct uart_8250_port *p =
+ container_of(port, struct uart_8250_port, port);
serial8250_set_sleep(p, state != 0);
}
@@ -2566,7 +2582,8 @@ static void serial8250_release_rsa_resource(struct uart_8250_port *up)
static void serial8250_release_port(struct uart_port *port)
{
- struct uart_8250_port *up = (struct uart_8250_port *)port;
+ struct uart_8250_port *up =
+ container_of(port, struct uart_8250_port, port);
serial8250_release_std_resource(up);
if (up->port.type == PORT_RSA)
@@ -2575,7 +2592,8 @@ static void serial8250_release_port(struct uart_port *port)
static int serial8250_request_port(struct uart_port *port)
{
- struct uart_8250_port *up = (struct uart_8250_port *)port;
+ struct uart_8250_port *up =
+ container_of(port, struct uart_8250_port, port);
int ret = 0;
ret = serial8250_request_std_resource(up);
@@ -2590,7 +2608,8 @@ static int serial8250_request_port(struct uart_port *port)
static void serial8250_config_port(struct uart_port *port, int flags)
{
- struct uart_8250_port *up = (struct uart_8250_port *)port;
+ struct uart_8250_port *up =
+ container_of(port, struct uart_8250_port, port);
int probeflags = PROBE_ANY;
int ret;
@@ -2771,7 +2790,8 @@ serial8250_register_ports(struct uart_driver *drv, struct device *dev)
static void serial8250_console_putchar(struct uart_port *port, int ch)
{
- struct uart_8250_port *up = (struct uart_8250_port *)port;
+ struct uart_8250_port *up =
+ container_of(port, struct uart_8250_port, port);
wait_for_xmitr(up, UART_LSR_THRE);
serial_out(up, UART_TX, ch);
--
1.7.2.3
next prev parent reply other threads:[~2010-12-01 23:39 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-11-22 14:26 [PATCH] 8250: add a UPIO_DWAPB32 for 32 bit accesses (v2) Jamie Iles
2010-12-01 1:17 ` Greg KH
2010-12-01 8:10 ` Jamie Iles
2010-12-01 17:01 ` Greg KH
2010-12-01 17:17 ` Jamie Iles
2010-12-01 19:27 ` Greg KH
2010-12-01 23:39 ` Jamie Iles [this message]
2010-12-01 23:39 ` [PATCH 2/2] 8250: add a UPIO_DWAPB32 for 32 bit accesses Jamie Iles
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1291246776-805-1-git-send-email-jamie@jamieiles.com \
--to=jamie@jamieiles.com \
--cc=greg@kroah.com \
--cc=linux-serial@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox