From: Greg Kroah-Hartman <gregkh@suse.de>
To: linux-serial@vger.kernel.org
Cc: Russ Gorby <russ.gorby@intel.com>, Greg Kroah-Hartman <gregkh@suse.de>
Subject: [PATCH 03/76] serial: ifx6x60: expanded info available from platform data
Date: Wed, 16 Mar 2011 14:11:33 -0700 [thread overview]
Message-ID: <1300309966-5745-3-git-send-email-gregkh@suse.de> (raw)
In-Reply-To: <1300309966-5745-1-git-send-email-gregkh@suse.de>
From: Russ Gorby <russ.gorby@intel.com>
Some platform attributes (e.g. max_hz, use_dma) were being intuited
from the modem type. These things should be specified by the platform
data.
Added max_hz, use_dma to ifx_modem_platform_data definition,
replaced is_6160 w/ modem_type, and changed clients accordingly
Signed-off-by: Russ Gorby <russ.gorby@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/tty/serial/ifx6x60.c | 33 +++++++++++++++++----------------
drivers/tty/serial/ifx6x60.h | 4 +++-
include/linux/spi/ifx_modem.h | 19 ++++++++++++-------
3 files changed, 32 insertions(+), 24 deletions(-)
diff --git a/drivers/tty/serial/ifx6x60.c b/drivers/tty/serial/ifx6x60.c
index ab93763..c42de71 100644
--- a/drivers/tty/serial/ifx6x60.c
+++ b/drivers/tty/serial/ifx6x60.c
@@ -8,7 +8,7 @@
* Jan Dumon <j.dumon@option.com>
*
* Copyright (C) 2009, 2010 Intel Corp
- * Russ Gorby <richardx.r.gorby@intel.com>
+ * Russ Gorby <russ.gorby@intel.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -732,7 +732,7 @@ static void ifx_spi_io(unsigned long data)
/*
* setup dma pointers
*/
- if (ifx_dev->is_6160) {
+ if (ifx_dev->use_dma) {
ifx_dev->spi_msg.is_dma_mapped = 1;
ifx_dev->tx_dma = ifx_dev->tx_bus;
ifx_dev->rx_dma = ifx_dev->rx_bus;
@@ -960,7 +960,7 @@ static int ifx_spi_spi_probe(struct spi_device *spi)
{
int ret;
int srdy;
- struct ifx_modem_platform_data *pl_data = NULL;
+ struct ifx_modem_platform_data *pl_data;
struct ifx_spi_device *ifx_dev;
if (saved_ifx_dev) {
@@ -968,6 +968,12 @@ static int ifx_spi_spi_probe(struct spi_device *spi)
return -ENODEV;
}
+ pl_data = (struct ifx_modem_platform_data *)spi->dev.platform_data;
+ if (!pl_data) {
+ dev_err(&spi->dev, "missing platform data!");
+ return -ENODEV;
+ }
+
/* initialize structure to hold our device variables */
ifx_dev = kzalloc(sizeof(struct ifx_spi_device), GFP_KERNEL);
if (!ifx_dev) {
@@ -983,7 +989,9 @@ static int ifx_spi_spi_probe(struct spi_device *spi)
init_timer(&ifx_dev->spi_timer);
ifx_dev->spi_timer.function = ifx_spi_timeout;
ifx_dev->spi_timer.data = (unsigned long)ifx_dev;
- ifx_dev->is_6160 = pl_data->is_6160;
+ ifx_dev->modem = pl_data->modem_type;
+ ifx_dev->use_dma = pl_data->use_dma;
+ ifx_dev->max_hz = pl_data->max_hz;
/* ensure SPI protocol flags are initialized to enable transfer */
ifx_dev->spi_more = 0;
@@ -1025,18 +1033,11 @@ static int ifx_spi_spi_probe(struct spi_device *spi)
goto error_ret;
}
- pl_data = (struct ifx_modem_platform_data *)spi->dev.platform_data;
- if (pl_data) {
- ifx_dev->gpio.reset = pl_data->rst_pmu;
- ifx_dev->gpio.po = pl_data->pwr_on;
- ifx_dev->gpio.mrdy = pl_data->mrdy;
- ifx_dev->gpio.srdy = pl_data->srdy;
- ifx_dev->gpio.reset_out = pl_data->rst_out;
- } else {
- dev_err(&spi->dev, "missing platform data!");
- ret = -ENODEV;
- goto error_ret;
- }
+ ifx_dev->gpio.reset = pl_data->rst_pmu;
+ ifx_dev->gpio.po = pl_data->pwr_on;
+ ifx_dev->gpio.mrdy = pl_data->mrdy;
+ ifx_dev->gpio.srdy = pl_data->srdy;
+ ifx_dev->gpio.reset_out = pl_data->rst_out;
dev_info(&spi->dev, "gpios %d, %d, %d, %d, %d",
ifx_dev->gpio.reset, ifx_dev->gpio.po, ifx_dev->gpio.mrdy,
diff --git a/drivers/tty/serial/ifx6x60.h b/drivers/tty/serial/ifx6x60.h
index deb7b8d..0ec39b5 100644
--- a/drivers/tty/serial/ifx6x60.h
+++ b/drivers/tty/serial/ifx6x60.h
@@ -88,7 +88,9 @@ struct ifx_spi_device {
dma_addr_t rx_dma;
dma_addr_t tx_dma;
- int is_6160; /* Modem type */
+ int modem; /* Modem type */
+ int use_dma; /* provide dma-able addrs in SPI msg */
+ long max_hz; /* max SPI frequency */
spinlock_t write_lock;
int write_pending;
diff --git a/include/linux/spi/ifx_modem.h b/include/linux/spi/ifx_modem.h
index a68f3b1..394fec9 100644
--- a/include/linux/spi/ifx_modem.h
+++ b/include/linux/spi/ifx_modem.h
@@ -2,13 +2,18 @@
#define LINUX_IFX_MODEM_H
struct ifx_modem_platform_data {
- unsigned short rst_out; /* modem reset out */
- unsigned short pwr_on; /* power on */
- unsigned short rst_pmu; /* reset modem */
- unsigned short tx_pwr; /* modem power threshold */
- unsigned short srdy; /* SRDY */
- unsigned short mrdy; /* MRDY */
- unsigned short is_6160; /* Modem type */
+ unsigned short rst_out; /* modem reset out */
+ unsigned short pwr_on; /* power on */
+ unsigned short rst_pmu; /* reset modem */
+ unsigned short tx_pwr; /* modem power threshold */
+ unsigned short srdy; /* SRDY */
+ unsigned short mrdy; /* MRDY */
+ unsigned char modem_type; /* Modem type */
+ unsigned long max_hz; /* max SPI frequency */
+ unsigned short use_dma:1; /* spi protocol driver supplies
+ dma-able addrs */
};
+#define IFX_MODEM_6160 1
+#define IFX_MODEM_6260 2
#endif
--
1.7.4.1
next prev parent reply other threads:[~2011-03-16 21:12 UTC|newest]
Thread overview: 78+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-03-16 20:57 [GIT PATCH] TTY/serial driver patches for .39 Greg KH
2011-03-16 21:11 ` [PATCH 01/76] tty: serial: bfin_sport_uart: fix signedness error Greg Kroah-Hartman
2011-03-16 21:11 ` [PATCH 02/76] serial: mfd: remove the timeout workaround for A0 Greg Kroah-Hartman
2011-03-16 21:11 ` Greg Kroah-Hartman [this message]
2011-03-16 21:11 ` [PATCH 04/76] OMAP: Enable Magic SysRq on serial console ttyOx Greg Kroah-Hartman
2011-03-16 21:11 ` [PATCH 05/76] serial: omap-serial: Enable the UART wake-up bits always Greg Kroah-Hartman
2011-03-16 21:11 ` [PATCH 06/76] tty_ldisc: don't use flush_scheduled_work() Greg Kroah-Hartman
2011-03-16 21:11 ` [PATCH 07/76] serial: mrst_max3110: make buffer larger Greg Kroah-Hartman
2011-03-16 21:11 ` [PATCH 08/76] serial-core: reset the console speed on resume Greg Kroah-Hartman
2011-03-16 21:11 ` [PATCH 09/76] 68328serial: remove unsed m68k_serial->tqueue_hangup Greg Kroah-Hartman
2011-03-16 22:41 ` Greg Ungerer
2011-03-16 21:11 ` [PATCH 10/76] serial: pch_uart: support new device ML7213 Greg Kroah-Hartman
2011-03-16 21:11 ` [PATCH 11/76] serial: pch_uart: revert Kconfig for non-DMA mode Greg Kroah-Hartman
2011-03-16 21:11 ` [PATCH 12/76] hvc_dcc: Fix bad code generation by marking assembly volatile Greg Kroah-Hartman
2011-03-16 21:11 ` [PATCH 13/76] hvc_dcc: Simplify put_chars()/get_chars() loops Greg Kroah-Hartman
2011-03-16 21:11 ` [PATCH 14/76] hvc_dcc: Simplify assembly for v6 and v7 ARM Greg Kroah-Hartman
2011-03-16 21:11 ` [PATCH 15/76] vt: Add virtual console keyboard mode OFF Greg Kroah-Hartman
2011-03-16 21:11 ` [PATCH 16/76] hvc: add Blackfin JTAG console support Greg Kroah-Hartman
2011-03-16 21:11 ` [PATCH 17/76] TTY: use appropriate printk priority level Greg Kroah-Hartman
2011-03-16 21:11 ` [PATCH 18/76] tty,vcs: lseek/VC-release race fix Greg Kroah-Hartman
2011-03-16 21:11 ` [PATCH 19/76] tty,vcs removing con_buf/conf_buf_mtx Greg Kroah-Hartman
2011-03-16 21:11 ` [PATCH 20/76] serial: ifx6x60: fixed call to tty_port_init Greg Kroah-Hartman
2011-03-16 21:11 ` [PATCH 21/76] serial: ifx6x60: dma_alloc_coherent must use parent dev Greg Kroah-Hartman
2011-03-16 21:11 ` [PATCH 22/76] serial: ifx6x60: changed internal bpw from boolean to int Greg Kroah-Hartman
2011-03-16 21:11 ` [PATCH 23/76] serial: ifx6x60: set SPI max_speed_hz based on platform type Greg Kroah-Hartman
2011-03-16 21:11 ` [PATCH 24/76] serial: ifx6x60: probe routine needs to call spi_setup Greg Kroah-Hartman
2011-03-16 21:11 ` [PATCH 25/76] serial: ifx6x60: minor cleanup Greg Kroah-Hartman
2011-03-16 21:11 ` [PATCH 26/76] serial: also set the uartclk value in resume after goes to highspeed Greg Kroah-Hartman
2011-03-16 21:11 ` [PATCH 27/76] serial: change the divisor latch only when prescalar actually changed Greg Kroah-Hartman
2011-03-16 21:11 ` [PATCH 28/76] tty: Add msm_smd_tty driver Greg Kroah-Hartman
2011-03-16 21:11 ` [PATCH 29/76] atmel_serial: enable PPS support Greg Kroah-Hartman
2011-03-16 21:12 ` [PATCH 30/76] tty,vt: fix VT_SETACTIVATE console switch Greg Kroah-Hartman
2011-03-16 21:12 ` [PATCH 31/76] tty: serial: altera_uart: Handle pdev->id == -1 in altera_uart_remove Greg Kroah-Hartman
2011-03-16 21:12 ` [PATCH 32/76] tty: serial: altera_uart: Use port->regshift to store bus shift Greg Kroah-Hartman
2011-03-16 21:12 ` [PATCH 33/76] MAINTAINERS: Add myself as a maintainer for altera_uart/altera_jtaguart Greg Kroah-Hartman
2011-03-16 21:12 ` [PATCH 34/76] tiocmget: kill off the passing of the struct file Greg Kroah-Hartman
2011-03-16 21:12 ` [PATCH 35/76] tiocmset: kill the file pointer argument Greg Kroah-Hartman
2011-03-16 21:12 ` [PATCH 36/76] tty: remove filp from the USB tty ioctls Greg Kroah-Hartman
2011-03-16 21:12 ` [PATCH 37/76] tty: now phase out the ioctl file pointer for good Greg Kroah-Hartman
2011-03-16 21:12 ` [PATCH 38/76] tty: fix build error in vt_ioctl.c if CONFIG_COMPAT is enabled Greg Kroah-Hartman
2011-03-16 21:12 ` [PATCH 39/76] tty: add a helper for setting termios data from kernel side Greg Kroah-Hartman
2011-03-16 21:12 ` [PATCH 40/76] hci_ath: Fix the mess in this driver Greg Kroah-Hartman
2011-03-16 21:12 ` [PATCH 41/76] tty: add TIOCVHANGUP to allow clean tty shutdown of all ttys Greg Kroah-Hartman
2011-03-16 21:12 ` [PATCH 42/76] tty: move Kconfig entries into drivers/tty from drivers/char Greg Kroah-Hartman
2011-03-16 21:12 ` [PATCH 43/76] tty: simserial: now phase out the ioctl file pointer for good Greg Kroah-Hartman
2011-03-16 21:12 ` [PATCH 44/76] serial: mfd: remove the TX full-empty interrupts workaround Greg Kroah-Hartman
2011-03-16 21:12 ` [PATCH 45/76] serial: mfd: add a module parameter for setting each port's working mode Greg Kroah-Hartman
2011-03-16 21:12 ` [PATCH 46/76] tty: serial: altera_jtaguart: Don't use plain integer as NULL pointer Greg Kroah-Hartman
2011-03-16 21:12 ` [PATCH 47/76] tty: serial: altera_jtaguart: Remove unused function early_altera_jtaguart_setup Greg Kroah-Hartman
2011-03-16 21:12 ` [PATCH 48/76] tty: serial: altera_jtaguart: Support getting mapbase and IRQ from resources Greg Kroah-Hartman
2011-03-16 21:12 ` [PATCH 49/76] tty: serial: altera_jtaguart: Fixup type usage of port flags Greg Kroah-Hartman
2011-03-16 21:12 ` [PATCH 50/76] tty: move a number of tty drivers from drivers/char/ to drivers/tty/ Greg Kroah-Hartman
2011-03-16 21:12 ` [PATCH 51/76] tty: move ipwireless driver from drivers/char/pcmcia/ " Greg Kroah-Hartman
2011-03-16 21:12 ` [PATCH 52/76] tty: move obsolete and broken tty drivers to drivers/staging/tty/ Greg Kroah-Hartman
2011-03-16 21:12 ` [PATCH 53/76] tty: move obsolete and broken generic_serial drivers to drivers/staging/generic_serial/ Greg Kroah-Hartman
2011-03-16 21:12 ` [PATCH 54/76] pch_uart: add multi-scatter processing Greg Kroah-Hartman
2011-03-16 21:12 ` [PATCH 55/76] pch_uart: add spin_lock_init Greg Kroah-Hartman
2011-03-16 21:12 ` [PATCH 56/76] pch_uart : Reduce memcpy Greg Kroah-Hartman
2011-03-16 21:12 ` [PATCH 57/76] pch_uart : Use dev_xxx not pr_xxx Greg Kroah-Hartman
2011-03-16 21:12 ` [PATCH 58/76] pch_uart: fix uart clock setting issue Greg Kroah-Hartman
2011-03-16 21:12 ` [PATCH 59/76] pch_uart: fix auto flow control miss-setting issue Greg Kroah-Hartman
2011-03-16 21:12 ` [PATCH 60/76] pch_uart: fix exclusive access issue Greg Kroah-Hartman
2011-03-16 21:12 ` [PATCH 61/76] pch_uart: Fix DMA channel miss-setting issue Greg Kroah-Hartman
2011-03-16 21:12 ` [PATCH 62/76] tty: forgot to remove ipwireless from drivers/char/pcmcia/Makefile Greg Kroah-Hartman
2011-03-16 21:12 ` [PATCH 63/76] tty: phase out of ioctl file pointer for tty3270 as well Greg Kroah-Hartman
2011-03-16 21:12 ` [PATCH 64/76] MAINTAINERS: Update HVC file patterns Greg Kroah-Hartman
2011-03-16 21:12 ` [PATCH 65/76] tty/serial: Relax the device_type restriction from of_serial Greg Kroah-Hartman
2011-03-16 21:12 ` [PATCH 66/76] nozomi: don't use flush_scheduled_work() Greg Kroah-Hartman
2011-03-16 21:12 ` [PATCH 67/76] Staging: generic_serial: fix double locking bug Greg Kroah-Hartman
2011-03-16 21:12 ` [PATCH 68/76] pcmcia: synclink_cs: fix prototype for mgslpc_ioctl() Greg Kroah-Hartman
2011-03-16 21:12 ` [PATCH 69/76] Staging: tty: fix build with epca.c driver Greg Kroah-Hartman
2011-03-16 21:12 ` [PATCH 70/76] tty: move cd1865.h to drivers/staging/tty/ Greg Kroah-Hartman
2011-03-16 21:12 ` [PATCH 71/76] tty_audit: fix tty_audit_add_data live lock on audit disabled Greg Kroah-Hartman
2011-03-16 21:12 ` [PATCH 72/76] serial: msm_serial_hs: Add MSM high speed UART driver Greg Kroah-Hartman
2011-03-16 21:12 ` [PATCH 73/76] n_gsm: add a documentation Greg Kroah-Hartman
2011-03-16 21:12 ` [PATCH 74/76] n_gsm: fix UIH control byte : P bit should be 0 Greg Kroah-Hartman
2011-03-16 21:12 ` [PATCH 75/76] pch_phub: add new device ML7213 Greg Kroah-Hartman
2011-03-16 21:12 ` [PATCH 76/76] pch_uart: reference clock on CM-iTC Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1300309966-5745-3-git-send-email-gregkh@suse.de \
--to=gregkh@suse.de \
--cc=linux-serial@vger.kernel.org \
--cc=russ.gorby@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).