[PATCH v3] 8250_pci: add -ENODEV code for Intel EG20T PCH

[Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>]

Intel EG20T PCH has UART device which is compatible with 8250.
Currently, with general configuration, the PCH UART driver is not loaded but
8250 standard driver is loaded.
Therefore, in case of using PCH UART driver, need to disable 8250 pci function.
However, this procedure is not best solution.
This patch, in 8250_pci, if the device is the PCH or the family IOH,
'-ENODEV' is returned.
As a result, disabling 8250-pci processing becomes unnecessary.

Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
---
V3: add own init() and set the init() to quirk table.

V2: Delete #ifdef CONFIG_SERIAL_PCH_UART ~ #endif
    Use quirk table structure
---
 drivers/tty/serial/8250_pci.c |   55 +++++++++++++++++++++++++++++++++++++++++
 1 files changed, 55 insertions(+), 0 deletions(-)

diff --git a/drivers/tty/serial/8250_pci.c b/drivers/tty/serial/8250_pci.c
index 738cec9..256c77e 100644
--- a/drivers/tty/serial/8250_pci.c
+++ b/drivers/tty/serial/8250_pci.c
@@ -988,6 +988,11 @@ static int skip_tx_en_setup(struct serial_private *priv,
 	return pci_default_setup(priv, board, port, idx);
 }
 
+static int pci_eg20tpch_init(struct pci_dev *dev)
+{
+	return -ENODEV;
+}
+
 /* This should be in linux/pci_ids.h */
 #define PCI_VENDOR_ID_SBSMODULARIO	0x124B
 #define PCI_SUBVENDOR_ID_SBSMODULARIO	0x124B
@@ -1430,6 +1435,56 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
 		.init		= pci_oxsemi_tornado_init,
 		.setup		= pci_default_setup,
 	},
+	{
+		.vendor         = PCI_VENDOR_ID_INTEL,
+		.device         = 0x8811,
+		.init		= pci_eg20tpch_init,
+	},
+	{
+		.vendor         = PCI_VENDOR_ID_INTEL,
+		.device         = 0x8812,
+		.init		= pci_eg20tpch_init,
+	},
+	{
+		.vendor         = PCI_VENDOR_ID_INTEL,
+		.device         = 0x8813,
+		.init		= pci_eg20tpch_init,
+	},
+	{
+		.vendor         = PCI_VENDOR_ID_INTEL,
+		.device         = 0x8814,
+		.init		= pci_eg20tpch_init,
+	},
+	{
+		.vendor         = 0x10DB,
+		.device         = 0x8027,
+		.init		= pci_eg20tpch_init,
+	},
+	{
+		.vendor         = 0x10DB,
+		.device         = 0x8028,
+		.init		= pci_eg20tpch_init,
+	},
+	{
+		.vendor         = 0x10DB,
+		.device         = 0x8029,
+		.init		= pci_eg20tpch_init,
+	},
+	{
+		.vendor         = 0x10DB,
+		.device         = 0x800C,
+		.init		= pci_eg20tpch_init,
+	},
+	{
+		.vendor         = 0x10DB,
+		.device         = 0x800D,
+		.init		= pci_eg20tpch_init,
+	},
+	{
+		.vendor         = 0x10DB,
+		.device         = 0x800D,
+		.init		= pci_eg20tpch_init,
+	},
 	/*
 	 * Default "match everything" terminator entry
 	 */
-- 
1.7.4