From: Alexander Shiyan <shc_work@mail.ru>
To: linux-serial@vger.kernel.org
Cc: Alan Cox <alan@linux.intel.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Arnd Bergmann <arnd@arndb.de>,
Alexander Shiyan <shc_work@mail.ru>
Subject: [PATCH 04/12] serial: clps711x: Using CPU clock subsystem for getting base UART speed
Date: Sun, 14 Oct 2012 11:05:26 +0400 [thread overview]
Message-ID: <1350198334-18737-4-git-send-email-shc_work@mail.ru> (raw)
In-Reply-To: <1350198334-18737-1-git-send-email-shc_work@mail.ru>
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
---
drivers/tty/serial/clps711x.c | 20 +++++++++++++++-----
1 files changed, 15 insertions(+), 5 deletions(-)
diff --git a/drivers/tty/serial/clps711x.c b/drivers/tty/serial/clps711x.c
index 3b17d19..0884939 100644
--- a/drivers/tty/serial/clps711x.c
+++ b/drivers/tty/serial/clps711x.c
@@ -37,6 +37,7 @@
#include <linux/serial_core.h>
#include <linux/serial.h>
#include <linux/io.h>
+#include <linux/clk.h>
#include <linux/platform_device.h>
#include <mach/hardware.h>
@@ -58,6 +59,7 @@
struct clps711x_port {
struct uart_driver uart;
+ struct clk *uart_clk;
struct uart_port port[UART_CLPS711X_NR];
int tx_enabled[UART_CLPS711X_NR];
#ifdef CONFIG_SERIAL_CLPS711X_CONSOLE
@@ -299,10 +301,9 @@ clps711xuart_set_termios(struct uart_port *port, struct ktermios *termios,
*/
termios->c_cflag |= CREAD;
- /*
- * Ask the core to calculate the divisor for us.
- */
- baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
+ /* Ask the core to calculate the divisor for us */
+ baud = uart_get_baud_rate(port, termios, old, port->uartclk / 4096,
+ port->uartclk / 16);
quot = uart_get_divisor(port, baud);
switch (termios->c_cflag & CSIZE) {
@@ -487,6 +488,13 @@ static int __devinit uart_clps711x_probe(struct platform_device *pdev)
}
platform_set_drvdata(pdev, s);
+ s->uart_clk = devm_clk_get(&pdev->dev, "uart");
+ if (IS_ERR(s->uart_clk)) {
+ dev_err(&pdev->dev, "Can't get UART clocks\n");
+ ret = PTR_ERR(s->uart_clk);
+ goto err_out;
+ }
+
s->uart.owner = THIS_MODULE;
s->uart.dev_name = "ttyCL";
s->uart.major = UART_CLPS711X_MAJOR;
@@ -505,6 +513,7 @@ static int __devinit uart_clps711x_probe(struct platform_device *pdev)
ret = uart_register_driver(&s->uart);
if (ret) {
dev_err(&pdev->dev, "Registering UART driver failed\n");
+ devm_clk_put(&pdev->dev, s->uart_clk);
goto err_out;
}
@@ -516,7 +525,7 @@ static int __devinit uart_clps711x_probe(struct platform_device *pdev)
s->port[i].type = PORT_CLPS711X;
s->port[i].fifosize = 16;
s->port[i].flags = UPF_SKIP_TEST | UPF_FIXED_TYPE;
- s->port[i].uartclk = 3686400;
+ s->port[i].uartclk = clk_get_rate(s->uart_clk);
s->port[i].ops = &uart_clps711x_ops;
WARN_ON(uart_add_one_port(&s->uart, &s->port[i]));
}
@@ -537,6 +546,7 @@ static int __devexit uart_clps711x_remove(struct platform_device *pdev)
for (i = 0; i < UART_CLPS711X_NR; i++)
uart_remove_one_port(&s->uart, &s->port[i]);
+ devm_clk_put(&pdev->dev, s->uart_clk);
uart_unregister_driver(&s->uart);
platform_set_drvdata(pdev, NULL);
--
1.7.8.6
next prev parent reply other threads:[~2012-10-14 7:06 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-14 7:05 [PATCH 01/12] serial: clps711x: Add platform_driver interface to clps711x driver Alexander Shiyan
2012-10-14 7:05 ` [PATCH 02/12] serial: clps711x: Convert all static variables to dynamic Alexander Shiyan
2012-10-14 7:05 ` [PATCH 03/12] serial: clps711x: Do not use "uart_port->unused" field Alexander Shiyan
2012-10-14 7:05 ` Alexander Shiyan [this message]
2012-10-14 7:05 ` [PATCH 05/12] serial: clps711x: Improved TX FIFO handling Alexander Shiyan
2012-10-14 7:05 ` [PATCH 06/12] serial: clps711x: Return valid modem controls for port that not support it Alexander Shiyan
2012-10-14 7:05 ` [PATCH 07/12] serial: clps711x: Fix break control handling Alexander Shiyan
2012-10-14 7:05 ` [PATCH 08/12] serial: clps711x: Check for valid TTY in RX-interrupt Alexander Shiyan
2012-10-14 7:05 ` [PATCH 09/12] serial: clps711x: Using resource-managed functions Alexander Shiyan
2012-10-14 7:05 ` [PATCH 10/12] serial: clps711x: Disable "break"-state before port startup Alexander Shiyan
2012-10-14 7:05 ` [PATCH 11/12] serial: clps711x: Fix TERMIOS-flags handling Alexander Shiyan
2012-10-14 7:05 ` [PATCH 12/12] serial: clps711x: Cleanup driver Alexander Shiyan
2012-10-14 7:54 ` [PATCH 01/12] serial: clps711x: Add platform_driver interface to clps711x driver Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1350198334-18737-4-git-send-email-shc_work@mail.ru \
--to=shc_work@mail.ru \
--cc=alan@linux.intel.com \
--cc=arnd@arndb.de \
--cc=gregkh@linuxfoundation.org \
--cc=linux-serial@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).