From: Johan Hovold <jhovold@gmail.com>
To: Greg KH <gregkh@linuxfoundation.org>
Cc: Alan Stern <stern@rowland.harvard.edu>,
linux-usb@vger.kernel.org, linux-serial@vger.kernel.org,
Peter Hurley <peter@hurleysoftware.com>,
Johan Hovold <jhovold@gmail.com>
Subject: [PATCH 2/4] TTY: fix DTR not being dropped on hang up
Date: Wed, 20 Feb 2013 17:02:50 +0100 [thread overview]
Message-ID: <1361376172-31860-3-git-send-email-jhovold@gmail.com> (raw)
In-Reply-To: <1361376172-31860-1-git-send-email-jhovold@gmail.com>
Move HUPCL handling to port shutdown so that DTR is dropped also on hang
up (tty_port_close is a noop for hung-up ports).
Also do not try to drop DTR for uninitialised ports where it has never
been raised (e.g. after a failed open).
Nine drivers currently call tty_port_close_start directly (rather than
through tty_port_close) and seven of them lower DTR as part of their
close (if the port has been initialised). Fixup the remaining two
drivers so that it continues to be lowered also on normal (non-HUP)
close. [ Note that most of those other seven drivers did not expect DTR
to have been dropped by tty_port_close_start in the first place. ]
Signed-off-by: Johan Hovold <jhovold@gmail.com>
---
drivers/tty/mxser.c | 4 ++++
drivers/tty/n_gsm.c | 4 ++++
drivers/tty/tty_port.c | 23 +++++++++++++----------
3 files changed, 21 insertions(+), 10 deletions(-)
diff --git a/drivers/tty/mxser.c b/drivers/tty/mxser.c
index 484b6a3..c547887 100644
--- a/drivers/tty/mxser.c
+++ b/drivers/tty/mxser.c
@@ -1084,6 +1084,10 @@ static void mxser_close(struct tty_struct *tty, struct file *filp)
mutex_lock(&port->mutex);
mxser_close_port(port);
mxser_flush_buffer(tty);
+ if (test_bit(ASYNCB_INITIALIZED, &port->flags)) {
+ if (tty->termios.c_cflag & HUPCL)
+ tty_port_lower_dtr_rts(port);
+ }
mxser_shutdown_port(port);
clear_bit(ASYNCB_INITIALIZED, &port->flags);
mutex_unlock(&port->mutex);
diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index 4a43ef5d7..049013e 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -2968,6 +2968,10 @@ static void gsmtty_close(struct tty_struct *tty, struct file *filp)
if (tty_port_close_start(&dlci->port, tty, filp) == 0)
goto out;
gsm_dlci_begin_close(dlci);
+ if (test_bit(ASYNCB_INITIALIZED, &dlci->port.flags)) {
+ if (tty->termios.c_cflag & HUPCL)
+ tty_port_lower_dtr_rts(&dlci->port);
+ }
tty_port_close_end(&dlci->port, tty);
tty_port_tty_set(&dlci->port, NULL);
out:
diff --git a/drivers/tty/tty_port.c b/drivers/tty/tty_port.c
index 57a061e..506f579 100644
--- a/drivers/tty/tty_port.c
+++ b/drivers/tty/tty_port.c
@@ -198,15 +198,25 @@ EXPORT_SYMBOL(tty_port_tty_set);
static void tty_port_shutdown(struct tty_port *port)
{
+ struct tty_struct *tty = tty_port_tty_get(port);
+
mutex_lock(&port->mutex);
if (port->console)
goto out;
if (test_and_clear_bit(ASYNCB_INITIALIZED, &port->flags)) {
+ /*
+ * Drop DTR/RTS if HUPCL is set. This causes any attached
+ * modem to hang up the line.
+ */
+ if (!tty || tty->termios.c_cflag & HUPCL)
+ tty_port_lower_dtr_rts(port);
+
if (port->ops->shutdown)
port->ops->shutdown(port);
}
out:
+ tty_kref_put(tty);
mutex_unlock(&port->mutex);
}
@@ -225,15 +235,13 @@ void tty_port_hangup(struct tty_port *port)
spin_lock_irqsave(&port->lock, flags);
port->count = 0;
port->flags &= ~ASYNC_NORMAL_ACTIVE;
- if (port->tty) {
+ if (port->tty)
set_bit(TTY_IO_ERROR, &port->tty->flags);
- tty_kref_put(port->tty);
- }
- port->tty = NULL;
spin_unlock_irqrestore(&port->lock, flags);
+ tty_port_shutdown(port);
+ tty_port_tty_set(port, NULL);
wake_up_interruptible(&port->open_wait);
wake_up_interruptible(&port->delta_msr_wait);
- tty_port_shutdown(port);
}
EXPORT_SYMBOL(tty_port_hangup);
@@ -452,11 +460,6 @@ int tty_port_close_start(struct tty_port *port,
/* Flush the ldisc buffering */
tty_ldisc_flush(tty);
- /* Drop DTR/RTS if HUPCL is set. This causes any attached modem to
- hang up the line */
- if (tty->termios.c_cflag & HUPCL)
- tty_port_lower_dtr_rts(port);
-
/* Don't call port->drop for the last reference. Callers will want
to drop the last active reference in ->shutdown() or the tty
shutdown path */
--
1.8.1.1
next prev parent reply other threads:[~2013-02-20 16:03 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <510B2C09.7020700@gtsys.com.hk>
2013-02-13 14:25 ` USB Ooops PL2303 when unplug while use (linux v3.7.3) Johan Hovold
2013-02-13 14:28 ` [PATCH] USB: serial: fix null-pointer dereferences on disconnect Johan Hovold
[not found] ` <1360765731-23164-1-git-send-email-jhovold-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2013-02-13 14:34 ` Felipe Balbi
2013-02-13 14:48 ` Johan Hovold
2013-02-13 16:41 ` Greg KH
2013-02-13 16:53 ` [PATCH resend] " Johan Hovold
2013-02-13 17:27 ` [RFC 0/4] tty: port hangup and close issues Johan Hovold
2013-02-13 17:27 ` [RFC 1/4] tty: clean up port shutdown Johan Hovold
2013-02-13 17:27 ` [RFC 2/4] tty: fix DTR/RTS not being dropped on hang up Johan Hovold
[not found] ` <1360776446-31371-3-git-send-email-jhovold-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2013-02-13 18:06 ` [RFC v2 " Johan Hovold
2013-02-13 19:32 ` [RFC " Peter Hurley
[not found] ` <1360783973.8499.48.camel-AsKIXgLx6sE@public.gmane.org>
2013-02-14 1:11 ` Peter Hurley
[not found] ` <1360804273.3385.23.camel-AsKIXgLx6sE@public.gmane.org>
2013-02-14 9:04 ` Johan Hovold
2013-02-13 17:27 ` [RFC 3/4] tty: clean up port drain-delay handling Johan Hovold
2013-02-14 1:39 ` Peter Hurley
2013-02-14 9:12 ` Johan Hovold
2013-02-13 17:27 ` [RFC 4/4] tty: fix close of uninitialised ports Johan Hovold
2013-02-13 17:36 ` [RFC 0/4] tty: port hangup and close issues Alan Cox
[not found] ` <20130213173630.63e29b47-+KEw/ACL1GZE/aiTQr5FLb0Ud+EcFu5g@public.gmane.org>
2013-02-13 18:05 ` Johan Hovold
[not found] ` <1360776446-31371-1-git-send-email-jhovold-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2013-02-20 16:02 ` [PATCH 0/4] TTY: port hangup and close fixes Johan Hovold
2013-02-20 16:02 ` [PATCH 1/4] TTY: clean up port shutdown Johan Hovold
2013-02-20 16:02 ` Johan Hovold [this message]
2013-02-23 14:18 ` [PATCH 2/4] TTY: fix DTR not being dropped on hang up Peter Hurley
2013-02-26 10:59 ` Johan Hovold
2013-02-20 16:02 ` [PATCH 3/4] TTY: clean up port drain-delay handling Johan Hovold
[not found] ` <1361376172-31860-1-git-send-email-jhovold-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2013-02-20 16:02 ` [PATCH 4/4] TTY: fix close of uninitialised ports Johan Hovold
2013-02-21 1:53 ` [PATCH 0/4] TTY: port hangup and close fixes Peter Hurley
2013-02-13 18:40 ` USB Ooops PL2303 when unplug while use (linux v3.7.3) Peter Hurley
[not found] ` <1360780808.8499.43.camel-AsKIXgLx6sE@public.gmane.org>
2013-02-14 17:43 ` Johan Hovold
2013-02-22 10:03 ` USB: serial: port lifetimes (was: Re: USB Ooops PL2303 when unplug while use (linux v3.7.3)) Johan Hovold
2013-02-22 15:17 ` Alan Stern
2013-02-22 17:11 ` Johan Hovold
2013-02-22 17:35 ` Alan Stern
[not found] ` <Pine.LNX.4.44L0.1302221218270.1365-100000-IYeN2dnnYyZXsRXLowluHWD2FQJk+8+b@public.gmane.org>
2013-02-22 17:44 ` Greg KH
2013-02-22 18:21 ` Peter Hurley
[not found] ` <1361557284.5752.25.camel-AsKIXgLx6sE@public.gmane.org>
2013-02-22 18:57 ` Alan Stern
2013-02-23 16:05 ` Johan Hovold
2013-02-23 16:23 ` Johan Hovold
2013-02-23 16:34 ` Johan Hovold
2013-02-23 17:31 ` Alan Stern
2013-02-23 18:12 ` Johan Hovold
2013-02-23 21:20 ` Alan Stern
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1361376172-31860-3-git-send-email-jhovold@gmail.com \
--to=jhovold@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-serial@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=peter@hurleysoftware.com \
--cc=stern@rowland.harvard.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).