From mboxrd@z Thu Jan 1 00:00:00 1970 From: Chander Kashyap Subject: [PATCH v3 02/10] ARM: dts: list the CPU nodes for Exynos5250 Date: Mon, 17 Jun 2013 16:30:27 +0530 Message-ID: <1371466836-4111-3-git-send-email-chander.kashyap@linaro.org> References: <1371466836-4111-1-git-send-email-chander.kashyap@linaro.org> Return-path: In-Reply-To: <1371466836-4111-1-git-send-email-chander.kashyap@linaro.org> Sender: linux-samsung-soc-owner@vger.kernel.org To: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org, linux-serial@vger.kernel.org, kgene.kim@samsung.com, t.figa@samsung.com, s.nawrocki@samsung.com, mark.rutland@arm.com, thomas.ab@samsung.com, Chander Kashyap List-Id: linux-serial@vger.kernel.org Instead of having to specify the number for CPUs in Exynos5250 in platsmp.c file, let the number of CPUs be determined by having this information listed in Exynos5250 device tree file. Signed-off-by: Chander Kashyap Reviewed-by: Tomasz Figa --- arch/arm/boot/dts/exynos5250.dtsi | 16 ++++++++++++++++ arch/arm/mach-exynos/platsmp.c | 10 +++++++--- 2 files changed, 23 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 2b59ea3..b4b808e 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -50,6 +50,22 @@ pinctrl3 = &pinctrl_3; }; + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0>; + }; + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <1>; + }; + }; + pd_gsc: gsc-power-domain@0x10044000 { compatible = "samsung,exynos4210-pd"; reg = <0x10044000 0x20>; diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c index 1a4e4e5..85ea4ca 100644 --- a/arch/arm/mach-exynos/platsmp.c +++ b/arch/arm/mach-exynos/platsmp.c @@ -180,10 +180,14 @@ static void __init exynos_smp_init_cpus(void) void __iomem *scu_base = scu_base_addr(); unsigned int i, ncores; - if (soc_is_exynos5250()) - ncores = 2; - else + if (read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A9) ncores = scu_base ? scu_get_core_count(scu_base) : 1; + else + /* + * CPU Nodes are passed thru DT and set_cpu_possible + * is set by "arm_dt_init_cpu_maps". + */ + return; /* sanity check */ if (ncores > nr_cpu_ids) { -- 1.7.9.5