[PATCH 0/9] ARM: tegra: move to generic DMA DT binding

[PATCH 0/9] ARM: tegra: move to generic DMA DT binding

[Richard Zhao]

The patch series aim to move apbdma to generic DT binding.

Changes:
- It add dmas/dma-names properties while leave
  nvidia,dma-request-selector to be compatible.
- update apbdma driver and dma client drivers
- ASoC tegra adds a new struct to pass device and dma-name.
- at last, remove legacy nvidia,dma-request-selector

Richard Zhao (9):
  ARM: dts: add generic DMA DT binding for tegra apbdma
  dma: tegra20-apbdma: move to generic device tree bindings
  spi: tegra114: move to generic dma DT binding
  spi: tegra20-slink: move to generic dma DT binding
  spi: tegra20-sflash: move to generic dma DT binding
  serial: tegra: move to generic dma DT binding
  ASoC: tegra: move to generic DMA DT binding
  ARM: dts: tegra: remove legacy nvidia,dma-request-selector properties
  dma: tegra20-apbdma: remove legacy nvidia,dma-request-selector support

 .../devicetree/bindings/dma/tegra20-apbdma.txt     |  1 +
 .../bindings/serial/nvidia,tegra20-hsuart.txt      |  8 ++--
 .../bindings/sound/nvidia,tegra20-ac97.txt         |  8 ++--
 .../bindings/sound/nvidia,tegra20-i2s.txt          |  8 ++--
 .../bindings/sound/nvidia,tegra30-ahub.txt         | 12 +++---
 .../bindings/spi/nvidia,tegra114-spi.txt           | 10 +++--
 .../bindings/spi/nvidia,tegra20-sflash.txt         | 10 +++--
 .../bindings/spi/nvidia,tegra20-slink.txt          | 10 +++--
 arch/arm/boot/dts/tegra114.dtsi                    | 41 +++++++++++++-------
 arch/arm/boot/dts/tegra20.dtsi                     | 40 +++++++++++++-------
 arch/arm/boot/dts/tegra30.dtsi                     | 37 ++++++++++++------
 drivers/dma/tegra20-apb-dma.c                      | 38 ++++++++++++++++++-
 drivers/spi/spi-tegra114.c                         | 16 +++-----
 drivers/spi/spi-tegra20-slink.c                    | 16 +++-----
 drivers/tty/serial/serial-tegra.c                  | 16 +-------
 sound/soc/tegra/tegra20_ac97.c                     | 17 +++------
 sound/soc/tegra/tegra20_ac97.h                     |  2 +
 sound/soc/tegra/tegra20_i2s.c                      | 26 ++++---------
 sound/soc/tegra/tegra20_i2s.h                      |  2 +
 sound/soc/tegra/tegra30_ahub.c                     | 25 +++++-------
 sound/soc/tegra/tegra30_ahub.h                     | 11 +++---
 sound/soc/tegra/tegra30_i2s.c                      | 44 +++++++++++++++-------
 sound/soc/tegra/tegra30_i2s.h                      |  2 +
 sound/soc/tegra/tegra_pcm.c                        | 14 +++++++
 sound/soc/tegra/tegra_pcm.h                        | 13 +++++++
 25 files changed, 260 insertions(+), 167 deletions(-)

-- 
1.8.1.5

[PATCH 1/9] ARM: dts: add generic DMA DT binding for tegra apbdma

[Richard Zhao]

All Tegra device drivers will soon move to generic DMA device tree bindings.
Add the required properties to the Tegra DT files to support that. The legacy
property nvidia,dma-request-selector will be removed after all drivers have
been converted, in order to maintain bisectability.

Changes:
 - Add '#dma-cells' for apbdma nodes
 - And properties 'dmas' and 'dma-names' for apbdma client nodes
 - update apbdma DT binding doc

Signed-off-by: Richard Zhao <rizhao@nvidia.com>
---
 .../devicetree/bindings/dma/tegra20-apbdma.txt     |  1 +
 arch/arm/boot/dts/tegra114.dtsi                    | 27 ++++++++++++++++++++++
 arch/arm/boot/dts/tegra20.dtsi                     | 27 ++++++++++++++++++++++
 arch/arm/boot/dts/tegra30.dtsi                     | 25 ++++++++++++++++++++
 4 files changed, 80 insertions(+)

diff --git a/Documentation/devicetree/bindings/dma/tegra20-apbdma.txt b/Documentation/devicetree/bindings/dma/tegra20-apbdma.txt
index 90fa7da..e4fc695 100644
--- a/Documentation/devicetree/bindings/dma/tegra20-apbdma.txt
+++ b/Documentation/devicetree/bindings/dma/tegra20-apbdma.txt
@@ -5,6 +5,7 @@ Required properties:
 - reg: Should contain DMA registers location and length. This shuld include
   all of the per-channel registers.
 - interrupts: Should contain all of the per-channel DMA interrupts.
+- #dma-cells: Must be <1>, which specifies the dma request.
 
 Examples:
 
diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi
index abf6c40..b133c62 100644
--- a/arch/arm/boot/dts/tegra114.dtsi
+++ b/arch/arm/boot/dts/tegra114.dtsi
@@ -81,6 +81,7 @@
 			     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA114_CLK_APBDMA>;
+		#dma-cells = <1>;
 	};
 
 	ahb: ahb {
@@ -125,6 +126,8 @@
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 		nvidia,dma-request-selector = <&apbdma 8>;
+		dmas = <&apbdma 8>;
+		dma-names = "rx-tx";
 		status = "disabled";
 		clocks = <&tegra_car TEGRA114_CLK_UARTA>;
 	};
@@ -135,6 +138,8 @@
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 		nvidia,dma-request-selector = <&apbdma 9>;
+		dmas = <&apbdma 9>;
+		dma-names = "rx-tx";
 		status = "disabled";
 		clocks = <&tegra_car TEGRA114_CLK_UARTB>;
 	};
@@ -145,6 +150,8 @@
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
 		nvidia,dma-request-selector = <&apbdma 10>;
+		dmas = <&apbdma 10>;
+		dma-names = "rx-tx";
 		status = "disabled";
 		clocks = <&tegra_car TEGRA114_CLK_UARTC>;
 	};
@@ -155,6 +162,8 @@
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
 		nvidia,dma-request-selector = <&apbdma 19>;
+		dmas = <&apbdma 19>;
+		dma-names = "rx-tx";
 		status = "disabled";
 		clocks = <&tegra_car TEGRA114_CLK_UARTD>;
 	};
@@ -227,6 +236,8 @@
 		reg = <0x7000d400 0x200>;
 		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
 		nvidia,dma-request-selector = <&apbdma 15>;
+		dmas = <&apbdma 15>;
+		dma-names = "rx-tx";
 		#address-cells = <1>;
 		#size-cells = <0>;
 		clocks = <&tegra_car TEGRA114_CLK_SBC1>;
@@ -239,6 +250,8 @@
 		reg = <0x7000d600 0x200>;
 		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
 		nvidia,dma-request-selector = <&apbdma 16>;
+		dmas = <&apbdma 16>;
+		dma-names = "rx-tx";
 		#address-cells = <1>;
 		#size-cells = <0>;
 		clocks = <&tegra_car TEGRA114_CLK_SBC2>;
@@ -251,6 +264,8 @@
 		reg = <0x7000d800 0x200>;
 		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 		nvidia,dma-request-selector = <&apbdma 17>;
+		dmas = <&apbdma 17>;
+		dma-names = "rx-tx";
 		#address-cells = <1>;
 		#size-cells = <0>;
 		clocks = <&tegra_car TEGRA114_CLK_SBC3>;
@@ -263,6 +278,8 @@
 		reg = <0x7000da00 0x200>;
 		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
 		nvidia,dma-request-selector = <&apbdma 18>;
+		dmas = <&apbdma 18>;
+		dma-names = "rx-tx";
 		#address-cells = <1>;
 		#size-cells = <0>;
 		clocks = <&tegra_car TEGRA114_CLK_SBC4>;
@@ -275,6 +292,8 @@
 		reg = <0x7000dc00 0x200>;
 		interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
 		nvidia,dma-request-selector = <&apbdma 27>;
+		dmas = <&apbdma 27>;
+		dma-names = "rx-tx";
 		#address-cells = <1>;
 		#size-cells = <0>;
 		clocks = <&tegra_car TEGRA114_CLK_SBC5>;
@@ -287,6 +306,8 @@
 		reg = <0x7000de00 0x200>;
 		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
 		nvidia,dma-request-selector = <&apbdma 28>;
+		dmas = <&apbdma 28>;
+		dma-names = "rx-tx";
 		#address-cells = <1>;
 		#size-cells = <0>;
 		clocks = <&tegra_car TEGRA114_CLK_SBC6>;
@@ -337,6 +358,12 @@
 			<&apbdma 3>, <&apbdma 4>, <&apbdma 6>, <&apbdma 7>,
 			<&apbdma 12>, <&apbdma 13>, <&apbdma 14>,
 			<&apbdma 29>;
+		dmas = <&apbdma 1>, <&apbdma 2>, <&apbdma 3>, <&apbdma 4>,
+			<&apbdma 6>, <&apbdma 7>, <&apbdma 12>, <&apbdma 13>,
+			<&apbdma 14>, <&apbdma 29>;
+		dma-names = "channel0", "channel1", "channel2", "channel3",
+			"channel4", "channel5", "channel6", "channel7",
+			"channel8", "channel9";
 		clocks = <&tegra_car TEGRA114_CLK_D_AUDIO>,
 			 <&tegra_car TEGRA114_CLK_APBIF>,
 			 <&tegra_car TEGRA114_CLK_I2S0>,
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index 9653fd8..0fe7f37 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -182,6 +182,7 @@
 			     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA20_CLK_APBDMA>;
+		#dma-cells = <1>;
 	};
 
 	ahb {
@@ -223,6 +224,8 @@
 		reg = <0x70002000 0x200>;
 		interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
 		nvidia,dma-request-selector = <&apbdma 12>;
+		dmas = <&apbdma 12>;
+		dma-names = "rx-tx";
 		clocks = <&tegra_car TEGRA20_CLK_AC97>;
 		status = "disabled";
 	};
@@ -232,6 +235,8 @@
 		reg = <0x70002800 0x200>;
 		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
 		nvidia,dma-request-selector = <&apbdma 2>;
+		dmas = <&apbdma 2>;
+		dma-names = "rx-tx";
 		clocks = <&tegra_car TEGRA20_CLK_I2S1>;
 		status = "disabled";
 	};
@@ -241,6 +246,8 @@
 		reg = <0x70002a00 0x200>;
 		interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 		nvidia,dma-request-selector = <&apbdma 1>;
+		dmas = <&apbdma 1>;
+		dma-names = "rx-tx";
 		clocks = <&tegra_car TEGRA20_CLK_I2S2>;
 		status = "disabled";
 	};
@@ -258,6 +265,8 @@
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 		nvidia,dma-request-selector = <&apbdma 8>;
+		dmas = <&apbdma 8>;
+		dma-names = "rx-tx";
 		clocks = <&tegra_car TEGRA20_CLK_UARTA>;
 		status = "disabled";
 	};
@@ -268,6 +277,8 @@
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 		nvidia,dma-request-selector = <&apbdma 9>;
+		dmas = <&apbdma 9>;
+		dma-names = "rx-tx";
 		clocks = <&tegra_car TEGRA20_CLK_UARTB>;
 		status = "disabled";
 	};
@@ -278,6 +289,8 @@
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
 		nvidia,dma-request-selector = <&apbdma 10>;
+		dmas = <&apbdma 10>;
+		dma-names = "rx-tx";
 		clocks = <&tegra_car TEGRA20_CLK_UARTC>;
 		status = "disabled";
 	};
@@ -288,6 +301,8 @@
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
 		nvidia,dma-request-selector = <&apbdma 19>;
+		dmas = <&apbdma 19>;
+		dma-names = "rx-tx";
 		clocks = <&tegra_car TEGRA20_CLK_UARTD>;
 		status = "disabled";
 	};
@@ -298,6 +313,8 @@
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
 		nvidia,dma-request-selector = <&apbdma 20>;
+		dmas = <&apbdma 20>;
+		dma-names = "rx-tx";
 		clocks = <&tegra_car TEGRA20_CLK_UARTE>;
 		status = "disabled";
 	};
@@ -334,6 +351,8 @@
 		reg = <0x7000c380 0x80>;
 		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 		nvidia,dma-request-selector = <&apbdma 11>;
+		dmas = <&apbdma 11>;
+		dma-names = "rx-tx";
 		#address-cells = <1>;
 		#size-cells = <0>;
 		clocks = <&tegra_car TEGRA20_CLK_SPI>;
@@ -381,6 +400,8 @@
 		reg = <0x7000d400 0x200>;
 		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
 		nvidia,dma-request-selector = <&apbdma 15>;
+		dmas = <&apbdma 15>;
+		dma-names = "rx-tx";
 		#address-cells = <1>;
 		#size-cells = <0>;
 		clocks = <&tegra_car TEGRA20_CLK_SBC1>;
@@ -392,6 +413,8 @@
 		reg = <0x7000d600 0x200>;
 		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
 		nvidia,dma-request-selector = <&apbdma 16>;
+		dmas = <&apbdma 16>;
+		dma-names = "rx-tx";
 		#address-cells = <1>;
 		#size-cells = <0>;
 		clocks = <&tegra_car TEGRA20_CLK_SBC2>;
@@ -403,6 +426,8 @@
 		reg = <0x7000d800 0x200>;
 		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 		nvidia,dma-request-selector = <&apbdma 17>;
+		dmas = <&apbdma 17>;
+		dma-names = "rx-tx";
 		#address-cells = <1>;
 		#size-cells = <0>;
 		clocks = <&tegra_car TEGRA20_CLK_SBC3>;
@@ -414,6 +439,8 @@
 		reg = <0x7000da00 0x200>;
 		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
 		nvidia,dma-request-selector = <&apbdma 18>;
+		dmas = <&apbdma 18>;
+		dma-names = "rx-tx";
 		#address-cells = <1>;
 		#size-cells = <0>;
 		clocks = <&tegra_car TEGRA20_CLK_SBC4>;
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index d8783f0..c266316 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -201,6 +201,7 @@
 			     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA30_CLK_APBDMA>;
+		#dma-cells = <1>;
 	};
 
 	ahb: ahb {
@@ -245,6 +246,8 @@
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 		nvidia,dma-request-selector = <&apbdma 8>;
+		dmas = <&apbdma 8>;
+		dma-names = "rx-tx";
 		clocks = <&tegra_car TEGRA30_CLK_UARTA>;
 		status = "disabled";
 	};
@@ -255,6 +258,8 @@
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 		nvidia,dma-request-selector = <&apbdma 9>;
+		dmas = <&apbdma 9>;
+		dma-names = "rx-tx";
 		clocks = <&tegra_car TEGRA30_CLK_UARTB>;
 		status = "disabled";
 	};
@@ -265,6 +270,8 @@
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
 		nvidia,dma-request-selector = <&apbdma 10>;
+		dmas = <&apbdma 10>;
+		dma-names = "rx-tx";
 		clocks = <&tegra_car TEGRA30_CLK_UARTC>;
 		status = "disabled";
 	};
@@ -275,6 +282,8 @@
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
 		nvidia,dma-request-selector = <&apbdma 19>;
+		dmas = <&apbdma 19>;
+		dma-names = "rx-tx";
 		clocks = <&tegra_car TEGRA30_CLK_UARTD>;
 		status = "disabled";
 	};
@@ -285,6 +294,8 @@
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
 		nvidia,dma-request-selector = <&apbdma 20>;
+		dmas = <&apbdma 20>;
+		dma-names = "rx-tx";
 		clocks = <&tegra_car TEGRA30_CLK_UARTE>;
 		status = "disabled";
 	};
@@ -369,6 +380,8 @@
 		reg = <0x7000d400 0x200>;
 		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
 		nvidia,dma-request-selector = <&apbdma 15>;
+		dmas = <&apbdma 15>;
+		dma-names = "rx-tx";
 		#address-cells = <1>;
 		#size-cells = <0>;
 		clocks = <&tegra_car TEGRA30_CLK_SBC1>;
@@ -380,6 +393,8 @@
 		reg = <0x7000d600 0x200>;
 		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
 		nvidia,dma-request-selector = <&apbdma 16>;
+		dmas = <&apbdma 16>;
+		dma-names = "rx-tx";
 		#address-cells = <1>;
 		#size-cells = <0>;
 		clocks = <&tegra_car TEGRA30_CLK_SBC2>;
@@ -391,6 +406,8 @@
 		reg = <0x7000d800 0x200>;
 		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 		nvidia,dma-request-selector = <&apbdma 17>;
+		dmas = <&apbdma 17>;
+		dma-names = "rx-tx";
 		#address-cells = <1>;
 		#size-cells = <0>;
 		clocks = <&tegra_car TEGRA30_CLK_SBC3>;
@@ -402,6 +419,8 @@
 		reg = <0x7000da00 0x200>;
 		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
 		nvidia,dma-request-selector = <&apbdma 18>;
+		dmas = <&apbdma 18>;
+		dma-names = "rx-tx";
 		#address-cells = <1>;
 		#size-cells = <0>;
 		clocks = <&tegra_car TEGRA30_CLK_SBC4>;
@@ -413,6 +432,8 @@
 		reg = <0x7000dc00 0x200>;
 		interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
 		nvidia,dma-request-selector = <&apbdma 27>;
+		dmas = <&apbdma 27>;
+		dma-names = "rx-tx";
 		#address-cells = <1>;
 		#size-cells = <0>;
 		clocks = <&tegra_car TEGRA30_CLK_SBC5>;
@@ -424,6 +445,8 @@
 		reg = <0x7000de00 0x200>;
 		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
 		nvidia,dma-request-selector = <&apbdma 28>;
+		dmas = <&apbdma 28>;
+		dma-names = "rx-tx";
 		#address-cells = <1>;
 		#size-cells = <0>;
 		clocks = <&tegra_car TEGRA30_CLK_SBC6>;
@@ -470,6 +493,8 @@
 		       0x70080200 0x100>;
 		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
 		nvidia,dma-request-selector = <&apbdma 1>;
+		dmas = <&apbdma 1>, <&apbdma 2>, <&apbdma 3>, <&apbdma 4>;
+		dma-names = "channel0", "channel1", "channel2", "channel3";
 		clocks = <&tegra_car TEGRA30_CLK_D_AUDIO>,
 			 <&tegra_car TEGRA30_CLK_APBIF>,
 			 <&tegra_car TEGRA30_CLK_I2S0>,
-- 
1.8.1.5

[PATCH 2/9] dma: tegra20-apbdma: move to generic device tree bindings

[Richard Zhao]

Update tegra20-apbdma driver to adopt generic DMA device tree bindings.
It calls of_dma_controller_register() with of_dma_simple_xlate to get
the generic DMA device tree helper support. The #dma-cells for apbdma
must be 1, which is slave ID.

The existing nvidia,dma-request-selector still works there, and the
support will be removed after all clients get converted to generic DMA
device tree helper.

Signed-off-by: Richard Zhao <rizhao@nvidia.com>
---
 drivers/dma/tegra20-apb-dma.c | 46 +++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 44 insertions(+), 2 deletions(-)

diff --git a/drivers/dma/tegra20-apb-dma.c b/drivers/dma/tegra20-apb-dma.c
index f137914..0e12f78 100644
--- a/drivers/dma/tegra20-apb-dma.c
+++ b/drivers/dma/tegra20-apb-dma.c
@@ -29,6 +29,7 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
+#include <linux/of_dma.h>
 #include <linux/platform_device.h>
 #include <linux/pm.h>
 #include <linux/pm_runtime.h>
@@ -199,6 +200,7 @@ struct tegra_dma_channel {
 	void			*callback_param;
 
 	/* Channel-slave specific configuration */
+	int slave_id;
 	struct dma_slave_config dma_sconfig;
 	struct tegra_dma_channel_regs	channel_reg;
 };
@@ -219,6 +221,8 @@ struct tegra_dma {
 	struct tegra_dma_channel channels[0];
 };
 
+static struct platform_driver tegra_dmac_driver;
+
 static inline void tdma_write(struct tegra_dma *tdma, u32 reg, u32 val)
 {
 	writel(val, tdma->base_addr + reg);
@@ -339,6 +343,14 @@ static int tegra_dma_slave_config(struct dma_chan *dc,
 	}
 
 	memcpy(&tdc->dma_sconfig, sconfig, sizeof(*sconfig));
+
+	/* If we didn't get slave_id from DT when request channel, use the one
+	 * passed here.
+	 * It makes compatible with legacy nvidia,dma-request-selector.
+	 */
+	if (tdc->slave_id == -EINVAL)
+		tdc->slave_id = sconfig->slave_id;
+
 	tdc->config_init = true;
 	return 0;
 }
@@ -943,7 +955,7 @@ static struct dma_async_tx_descriptor *tegra_dma_prep_slave_sg(
 	ahb_seq |= TEGRA_APBDMA_AHBSEQ_BUS_WIDTH_32;
 
 	csr |= TEGRA_APBDMA_CSR_ONCE | TEGRA_APBDMA_CSR_FLOW;
-	csr |= tdc->dma_sconfig.slave_id << TEGRA_APBDMA_CSR_REQ_SEL_SHIFT;
+	csr |= tdc->slave_id << TEGRA_APBDMA_CSR_REQ_SEL_SHIFT;
 	if (flags & DMA_PREP_INTERRUPT)
 		csr |= TEGRA_APBDMA_CSR_IE_EOC;
 
@@ -1087,7 +1099,7 @@ struct dma_async_tx_descriptor *tegra_dma_prep_dma_cyclic(
 	csr |= TEGRA_APBDMA_CSR_FLOW;
 	if (flags & DMA_PREP_INTERRUPT)
 		csr |= TEGRA_APBDMA_CSR_IE_EOC;
-	csr |= tdc->dma_sconfig.slave_id << TEGRA_APBDMA_CSR_REQ_SEL_SHIFT;
+	csr |= tdc->slave_id << TEGRA_APBDMA_CSR_REQ_SEL_SHIFT;
 
 	apb_seq |= TEGRA_APBDMA_APBSEQ_WRAP_WORD_1;
 
@@ -1209,6 +1221,23 @@ static void tegra_dma_free_chan_resources(struct dma_chan *dc)
 	clk_disable_unprepare(tdma->dma_clk);
 }
 
+static bool tegra_dma_filter_fn(struct dma_chan *dc, void *param)
+{
+	if (dc->device->dev->driver == &tegra_dmac_driver.driver) {
+		struct tegra_dma_channel *tdc = to_tegra_dma_chan(dc);
+		unsigned req = *(unsigned *)param;
+
+		tdc->slave_id = req;
+
+		return true;
+	}
+	return false;
+}
+
+static struct of_dma_filter_info tegra_dma_info = {
+	.filter_fn = tegra_dma_filter_fn,
+};
+
 /* Tegra20 specific DMA controller information */
 static const struct tegra_dma_chip_data tegra20_dma_chip_data = {
 	.nr_channels		= 16,
@@ -1345,6 +1374,7 @@ static int tegra_dma_probe(struct platform_device *pdev)
 				&tdma->dma_dev.channels);
 		tdc->tdma = tdma;
 		tdc->id = i;
+		tdc->slave_id = -EINVAL;
 
 		tasklet_init(&tdc->tasklet, tegra_dma_tasklet,
 				(unsigned long)tdc);
@@ -1378,10 +1408,21 @@ static int tegra_dma_probe(struct platform_device *pdev)
 		goto err_irq;
 	}
 
+	ret = of_dma_controller_register(pdev->dev.of_node,
+					of_dma_simple_xlate, &tegra_dma_info);
+	if (ret) {
+		dev_err(&pdev->dev,
+			"Tegra20 APB DMA controller registration failed %d\n",
+			ret);
+		goto err_of_dma;
+	}
+
 	dev_info(&pdev->dev, "Tegra20 APB DMA driver register %d channels\n",
 			cdata->nr_channels);
 	return 0;
 
+err_of_dma:
+	dma_async_device_unregister(&tdma->dma_dev);
 err_irq:
 	while (--i >= 0) {
 		struct tegra_dma_channel *tdc = &tdma->channels[i];
@@ -1401,6 +1442,7 @@ static int tegra_dma_remove(struct platform_device *pdev)
 	int i;
 	struct tegra_dma_channel *tdc;
 
+	of_dma_controller_free(pdev->dev.of_node);
 	dma_async_device_unregister(&tdma->dma_dev);
 
 	for (i = 0; i < tdma->chip_data->nr_channels; ++i) {
-- 
1.8.1.5

[PATCH 3/9] spi: tegra114: move to generic dma DT binding

[Richard Zhao]

- driver: remove use of nvidia,dma-request-selector
	  use dma_request_slave_channel to request channel
- if dmas/dma-names are missing, it still supports cpu based transfer
- update binding doc and specify dmas/dma-names properties as optional

Signed-off-by: Richard Zhao <rizhao@nvidia.com>
---
 .../devicetree/bindings/spi/nvidia,tegra114-spi.txt      | 10 +++++++---
 drivers/spi/spi-tegra114.c                               | 16 +++++-----------
 2 files changed, 12 insertions(+), 14 deletions(-)

diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt b/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt
index 91ff771..92e1a9a 100644
--- a/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt
+++ b/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt
@@ -4,11 +4,14 @@ Required properties:
 - compatible : should be "nvidia,tegra114-spi".
 - reg: Should contain SPI registers location and length.
 - interrupts: Should contain SPI interrupts.
-- nvidia,dma-request-selector : The Tegra DMA controller's phandle and
-  request selector for this SPI controller.
 - This is also require clock named "spi" as per binding document
   Documentation/devicetree/bindings/clock/clock-bindings.txt
 
+Optional properties:
+- dmas : The Tegra DMA controller's phandle and request selector for
+  this SPI controller.
+- dma-names : Should be "rx-tx".
+
 Recommended properties:
 - spi-max-frequency: Definition as per
                      Documentation/devicetree/bindings/spi/spi-bus.txt
@@ -18,7 +21,8 @@ spi@7000d600 {
 	compatible = "nvidia,tegra114-spi";
 	reg = <0x7000d600 0x200>;
 	interrupts = <0 82 0x04>;
-	nvidia,dma-request-selector = <&apbdma 16>;
+	dmas = <&apbdma 16>;
+	dma-names = "rx-tx";
 	spi-max-frequency = <25000000>;
 	#address-cells = <1>;
 	#size-cells = <0>;
diff --git a/drivers/spi/spi-tegra114.c b/drivers/spi/spi-tegra114.c
index e8f542a..baff559 100644
--- a/drivers/spi/spi-tegra114.c
+++ b/drivers/spi/spi-tegra114.c
@@ -177,7 +177,7 @@ struct tegra_spi_data {
 	void __iomem				*base;
 	phys_addr_t				phys;
 	unsigned				irq;
-	int					dma_req_sel;
+	bool					use_dma;
 	u32					spi_max_frequency;
 	u32					cur_speed;
 
@@ -599,11 +599,8 @@ static int tegra_spi_init_dma_param(struct tegra_spi_data *tspi,
 	dma_addr_t dma_phys;
 	int ret;
 	struct dma_slave_config dma_sconfig;
-	dma_cap_mask_t mask;
 
-	dma_cap_zero(mask);
-	dma_cap_set(DMA_SLAVE, mask);
-	dma_chan = dma_request_channel(mask, NULL, NULL);
+	dma_chan = dma_request_slave_channel(tspi->dev, "rx-tx");
 	if (!dma_chan) {
 		dev_err(tspi->dev,
 			"Dma channel is not available, will try later\n");
@@ -618,7 +615,6 @@ static int tegra_spi_init_dma_param(struct tegra_spi_data *tspi,
 		return -ENOMEM;
 	}
 
-	dma_sconfig.slave_id = tspi->dma_req_sel;
 	if (dma_to_memory) {
 		dma_sconfig.src_addr = tspi->phys + SPI_RX_FIFO;
 		dma_sconfig.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
@@ -1012,11 +1008,9 @@ static void tegra_spi_parse_dt(struct platform_device *pdev,
 	struct tegra_spi_data *tspi)
 {
 	struct device_node *np = pdev->dev.of_node;
-	u32 of_dma[2];
 
-	if (of_property_read_u32_array(np, "nvidia,dma-request-selector",
-				of_dma, 2) >= 0)
-		tspi->dma_req_sel = of_dma[1];
+	if (of_find_property(np, "dmas", NULL))
+		tspi->use_dma = true;
 
 	if (of_property_read_u32(np, "spi-max-frequency",
 				&tspi->spi_max_frequency))
@@ -1093,7 +1087,7 @@ static int tegra_spi_probe(struct platform_device *pdev)
 	tspi->max_buf_size = SPI_FIFO_DEPTH << 2;
 	tspi->dma_buf_size = DEFAULT_SPI_DMA_BUF_LEN;
 
-	if (tspi->dma_req_sel) {
+	if (tspi->use_dma) {
 		ret = tegra_spi_init_dma_param(tspi, true);
 		if (ret < 0) {
 			dev_err(&pdev->dev, "RxDma Init failed, err %d\n", ret);
-- 
1.8.1.5

[PATCH 4/9] spi: tegra20-slink: move to generic dma DT binding

[Richard Zhao]

- driver: remove use of nvidia,dma-request-selector
	  use dma_request_slave_channel to request channel
- if dmas/dma-names are missing, it still supports cpu based transfer
- update binding doc and specify dmas/dma-names properties as optional

Signed-off-by: Richard Zhao <rizhao@nvidia.com>
---
 .../devicetree/bindings/spi/nvidia,tegra20-slink.txt     | 10 +++++++---
 drivers/spi/spi-tegra20-slink.c                          | 16 +++++-----------
 2 files changed, 12 insertions(+), 14 deletions(-)

diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra20-slink.txt b/Documentation/devicetree/bindings/spi/nvidia,tegra20-slink.txt
index eefe15e..ae43bd1 100644
--- a/Documentation/devicetree/bindings/spi/nvidia,tegra20-slink.txt
+++ b/Documentation/devicetree/bindings/spi/nvidia,tegra20-slink.txt
@@ -4,8 +4,11 @@ Required properties:
 - compatible : should be "nvidia,tegra20-slink", "nvidia,tegra30-slink".
 - reg: Should contain SLINK registers location and length.
 - interrupts: Should contain SLINK interrupts.
-- nvidia,dma-request-selector : The Tegra DMA controller's phandle and
-  request selector for this SLINK controller.
+
+Optional properties:
+- dmas : The Tegra DMA controller's phandle and request selector for
+  this SLINK controller.
+- dma-names : Should be "rx-tx".
 
 Recommended properties:
 - spi-max-frequency: Definition as per
@@ -17,7 +20,8 @@ spi@7000d600 {
 	compatible = "nvidia,tegra20-slink";
 	reg = <0x7000d600 0x200>;
 	interrupts = <0 82 0x04>;
-	nvidia,dma-request-selector = <&apbdma 16>;
+	dmas = <&apbdma 16>;
+	dma-names = "rx-tx";
 	spi-max-frequency = <25000000>;
 	#address-cells = <1>;
 	#size-cells = <0>;
diff --git a/drivers/spi/spi-tegra20-slink.c b/drivers/spi/spi-tegra20-slink.c
index 80490cc..278fb04 100644
--- a/drivers/spi/spi-tegra20-slink.c
+++ b/drivers/spi/spi-tegra20-slink.c
@@ -170,7 +170,7 @@ struct tegra_slink_data {
 	void __iomem				*base;
 	phys_addr_t				phys;
 	unsigned				irq;
-	int					dma_req_sel;
+	bool					use_dma;
 	u32					spi_max_frequency;
 	u32					cur_speed;
 
@@ -629,11 +629,8 @@ static int tegra_slink_init_dma_param(struct tegra_slink_data *tspi,
 	dma_addr_t dma_phys;
 	int ret;
 	struct dma_slave_config dma_sconfig;
-	dma_cap_mask_t mask;
 
-	dma_cap_zero(mask);
-	dma_cap_set(DMA_SLAVE, mask);
-	dma_chan = dma_request_channel(mask, NULL, NULL);
+	dma_chan = dma_request_slave_channel(tspi->dev, "rx-tx");
 	if (!dma_chan) {
 		dev_err(tspi->dev,
 			"Dma channel is not available, will try later\n");
@@ -648,7 +645,6 @@ static int tegra_slink_init_dma_param(struct tegra_slink_data *tspi,
 		return -ENOMEM;
 	}
 
-	dma_sconfig.slave_id = tspi->dma_req_sel;
 	if (dma_to_memory) {
 		dma_sconfig.src_addr = tspi->phys + SLINK_RX_FIFO;
 		dma_sconfig.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
@@ -1034,11 +1030,9 @@ static irqreturn_t tegra_slink_isr(int irq, void *context_data)
 static void tegra_slink_parse_dt(struct tegra_slink_data *tspi)
 {
 	struct device_node *np = tspi->dev->of_node;
-	u32 of_dma[2];
 
-	if (of_property_read_u32_array(np, "nvidia,dma-request-selector",
-				of_dma, 2) >= 0)
-		tspi->dma_req_sel = of_dma[1];
+	if (of_find_property(np, "dmas", NULL))
+		tspi->use_dma = true;
 
 	if (of_property_read_u32(np, "spi-max-frequency",
 					&tspi->spi_max_frequency))
@@ -1132,7 +1126,7 @@ static int tegra_slink_probe(struct platform_device *pdev)
 	tspi->max_buf_size = SLINK_FIFO_DEPTH << 2;
 	tspi->dma_buf_size = DEFAULT_SPI_DMA_BUF_LEN;
 
-	if (tspi->dma_req_sel) {
+	if (tspi->use_dma) {
 		ret = tegra_slink_init_dma_param(tspi, true);
 		if (ret < 0) {
 			dev_err(&pdev->dev, "RxDma Init failed, err %d\n", ret);
-- 
1.8.1.5

[PATCH 5/9] spi: tegra20-sflash: move to generic dma DT binding

[Richard Zhao]

update binding doc.

Signed-off-by: Richard Zhao <rizhao@nvidia.com>
---
 .../devicetree/bindings/spi/nvidia,tegra20-sflash.txt          | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra20-sflash.txt b/Documentation/devicetree/bindings/spi/nvidia,tegra20-sflash.txt
index 7b53da5..fa22d1b 100644
--- a/Documentation/devicetree/bindings/spi/nvidia,tegra20-sflash.txt
+++ b/Documentation/devicetree/bindings/spi/nvidia,tegra20-sflash.txt
@@ -4,8 +4,11 @@ Required properties:
 - compatible : should be "nvidia,tegra20-sflash".
 - reg: Should contain SFLASH registers location and length.
 - interrupts: Should contain SFLASH interrupts.
-- nvidia,dma-request-selector : The Tegra DMA controller's phandle and
-  request selector for this SFLASH controller.
+
+Optional properties:
+- dmas : The Tegra DMA controller's phandle and request selector for
+  this SFLASH controller.
+- dma-names : Should be "rx-tx".
 
 Recommended properties:
 - spi-max-frequency: Definition as per
@@ -17,7 +20,8 @@ spi@7000c380 {
 	compatible = "nvidia,tegra20-sflash";
 	reg = <0x7000c380 0x80>;
 	interrupts = <0 39 0x04>;
-	nvidia,dma-request-selector = <&apbdma 16>;
+	dmas = <&apbdma 16>;
+	dma-names = "rx-tx";
 	spi-max-frequency = <25000000>;
 	#address-cells = <1>;
 	#size-cells = <0>;
-- 
1.8.1.5

[PATCH 6/9] serial: tegra: move to generic dma DT binding

[Richard Zhao]

- driver: remove use of nvidia,dma-request-selector
	  use dma_request_slave_channel to request channel
- update binding doc

Signed-off-by: Richard Zhao <rizhao@nvidia.com>
---
 .../devicetree/bindings/serial/nvidia,tegra20-hsuart.txt |  8 +++++---
 drivers/tty/serial/serial-tegra.c                        | 16 +---------------
 2 files changed, 6 insertions(+), 18 deletions(-)

diff --git a/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.txt b/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.txt
index 392a449..1ed2f48 100644
--- a/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.txt
+++ b/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.txt
@@ -4,8 +4,9 @@ Required properties:
 - compatible : should be "nvidia,tegra30-hsuart", "nvidia,tegra20-hsuart".
 - reg: Should contain UART controller registers location and length.
 - interrupts: Should contain UART controller interrupts.
-- nvidia,dma-request-selector : The Tegra DMA controller's phandle and
-  request selector for this UART controller.
+- dmas : The Tegra DMA controller's phandle and request selector for
+  this UART controller.
+- dma-names : Should be "rx-tx";
 
 Optional properties:
 - nvidia,enable-modem-interrupt: Enable modem interrupts. Should be enable
@@ -18,7 +19,8 @@ serial@70006000 {
 	reg = <0x70006000 0x40>;
 	reg-shift = <2>;
 	interrupts = <0 36 0x04>;
-	nvidia,dma-request-selector = <&apbdma 8>;
+	dmas = <&apbdma 8>;
+	dma-names = "rx-tx";
 	nvidia,enable-modem-interrupt;
 	status = "disabled";
 };
diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c
index ee7c812..c8a7828 100644
--- a/drivers/tty/serial/serial-tegra.c
+++ b/drivers/tty/serial/serial-tegra.c
@@ -120,7 +120,6 @@ struct tegra_uart_port {
 	bool					rx_timeout;
 	int					rx_in_progress;
 	int					symb_bit;
-	int					dma_req_sel;
 
 	struct dma_chan				*rx_dma_chan;
 	struct dma_chan				*tx_dma_chan;
@@ -902,11 +901,8 @@ static int tegra_uart_dma_channel_allocate(struct tegra_uart_port *tup,
 	dma_addr_t dma_phys;
 	int ret;
 	struct dma_slave_config dma_sconfig;
-	dma_cap_mask_t mask;
 
-	dma_cap_zero(mask);
-	dma_cap_set(DMA_SLAVE, mask);
-	dma_chan = dma_request_channel(mask, NULL, NULL);
+	dma_chan = dma_request_slave_channel(tup->uport.dev, "rx-tx");
 	if (!dma_chan) {
 		dev_err(tup->uport.dev,
 			"Dma channel is not available, will try later\n");
@@ -930,7 +926,6 @@ static int tegra_uart_dma_channel_allocate(struct tegra_uart_port *tup,
 		dma_buf = tup->uport.state->xmit.buf;
 	}
 
-	dma_sconfig.slave_id = tup->dma_req_sel;
 	if (dma_to_memory) {
 		dma_sconfig.src_addr = tup->uport.mapbase;
 		dma_sconfig.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
@@ -1214,17 +1209,8 @@ static int tegra_uart_parse_dt(struct platform_device *pdev,
 	struct tegra_uart_port *tup)
 {
 	struct device_node *np = pdev->dev.of_node;
-	u32 of_dma[2];
 	int port;
 
-	if (of_property_read_u32_array(np, "nvidia,dma-request-selector",
-				of_dma, 2) >= 0) {
-		tup->dma_req_sel = of_dma[1];
-	} else {
-		dev_err(&pdev->dev, "missing dma requestor in device tree\n");
-		return -EINVAL;
-	}
-
 	port = of_alias_get_id(np, "serial");
 	if (port < 0) {
 		dev_err(&pdev->dev, "failed to get alias id, errno %d\n", port);
-- 
1.8.1.5

[PATCH 7/9] ASoC: tegra: move to generic DMA DT binding

[Richard Zhao]

- add tegra_dma_filter_data to specify dma info
  DMA DT binding needs the device that raise dma request and dma name
  to request a dma channel. tegra30_i2s is a special case. It should be ahub
  device and it also has dma name that cannot handled by ASoC dmaengine code.
  So we pass the info using filter data in snd_dmaengine_dai_dma_data.
- change i2s/ac97 drivers to use generic DT binding
- tegra30_i2s: alloc ahub tx/rx fifo at driver probe time

Signed-off-by: Richard Zhao <rizhao@nvidia.com>
---
 .../bindings/sound/nvidia,tegra20-ac97.txt         |  8 ++--
 .../bindings/sound/nvidia,tegra20-i2s.txt          |  8 ++--
 .../bindings/sound/nvidia,tegra30-ahub.txt         | 12 +++---
 sound/soc/tegra/tegra20_ac97.c                     | 17 +++------
 sound/soc/tegra/tegra20_ac97.h                     |  2 +
 sound/soc/tegra/tegra20_i2s.c                      | 26 ++++---------
 sound/soc/tegra/tegra20_i2s.h                      |  2 +
 sound/soc/tegra/tegra30_ahub.c                     | 25 +++++-------
 sound/soc/tegra/tegra30_ahub.h                     | 11 +++---
 sound/soc/tegra/tegra30_i2s.c                      | 44 +++++++++++++++-------
 sound/soc/tegra/tegra30_i2s.h                      |  2 +
 sound/soc/tegra/tegra_pcm.c                        | 14 +++++++
 sound/soc/tegra/tegra_pcm.h                        | 13 +++++++
 13 files changed, 107 insertions(+), 77 deletions(-)

diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra20-ac97.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra20-ac97.txt
index c145497..972f444 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra20-ac97.txt
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra20-ac97.txt
@@ -4,8 +4,9 @@ Required properties:
 - compatible : "nvidia,tegra20-ac97"
 - reg : Should contain AC97 controller registers location and length
 - interrupts : Should contain AC97 interrupt
-- nvidia,dma-request-selector : The Tegra DMA controller's phandle and
-  request selector for the AC97 controller
+- dmas : The Tegra DMA controller's phandle and request selector for
+  the AC97 controller
+- dma-names : Should be "rx-tx"
 - nvidia,codec-reset-gpio : The Tegra GPIO controller's phandle and the number
   of the GPIO used to reset the external AC97 codec
 - nvidia,codec-sync-gpio : The Tegra GPIO controller's phandle and the number
@@ -16,7 +17,8 @@ ac97@70002000 {
 	compatible = "nvidia,tegra20-ac97";
 	reg = <0x70002000 0x200>;
 	interrupts = <0 81 0x04>;
-	nvidia,dma-request-selector = <&apbdma 12>;
+	dmas = <&apbdma 12>;
+	dma-names = "rx-tx";
 	nvidia,codec-reset-gpio = <&gpio 170 0>;
 	nvidia,codec-sync-gpio = <&gpio 120 0>;
 };
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.txt
index 0df2b5c..61a6c8d 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.txt
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.txt
@@ -4,8 +4,9 @@ Required properties:
 - compatible : "nvidia,tegra20-i2s"
 - reg : Should contain I2S registers location and length
 - interrupts : Should contain I2S interrupt
-- nvidia,dma-request-selector : The Tegra DMA controller's phandle and
-  request selector for this I2S controller
+- dmas : The Tegra DMA controller's phandle and request selector
+  for this I2S controller
+- dma-names : Should be "rx-tx"
 
 Example:
 
@@ -13,5 +14,6 @@ i2s@70002800 {
 	compatible = "nvidia,tegra20-i2s";
 	reg = <0x70002800 0x200>;
 	interrupts = < 45 >;
-	nvidia,dma-request-selector = < &apbdma 2 >;
+	dmas = < &apbdma 2 >;
+	dma-names = "rx-tx";
 };
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra30-ahub.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra30-ahub.txt
index 0e5c12c..0ac563b 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra30-ahub.txt
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra30-ahub.txt
@@ -7,11 +7,10 @@ Required properties:
   - Tegra30 requires 2 entries, for the APBIF and AHUB/AUDIO register blocks.
   - Tegra114 requires an additional entry, for the APBIF2 register block.
 - interrupts : Should contain AHUB interrupt
-- nvidia,dma-request-selector : A list of the DMA channel specifiers. Each
-  entry contains the Tegra DMA controller's phandle and request selector.
-  If a single entry is present, the request selectors for the channels are
-  assumed to be contiguous, and increment from this value.
-  If multiple values are given, one value must be given per channel.
+- dmas : A list of the DMA channel specifiers. Each entry contains the Tegra
+  DMA controller's phandle and request selector.
+- dma-names : Should be a list of "channelx", in which x is 0, 1, 2, ...
+  One entry is required for each RX/TX FIFO pair that exists in hardware.
 - clocks : Must contain an entry for each required entry in clock-names.
 - clock-names : Must include the following entries:
   - Tegra30: Requires d_audio, apbif, i2s0, i2s1, i2s2, i2s3, i2s4, dam0,
@@ -34,7 +33,8 @@ ahub@70080000 {
 	compatible = "nvidia,tegra30-ahub";
 	reg = <0x70080000 0x200 0x70080200 0x100>;
 	interrupts = < 0 103 0x04 >;
-	nvidia,dma-request-selector = <&apbdma 1>;
+	dmas = <&apbdma 1>, <&apbdma 2>, <&apbdma 3>, <&apbdma 4>;
+	dma-names = "channel0", "channel1", "channel2", "channel3";
 	clocks = <&tegra_car 106>, <&tegra_car 107>, <&tegra_car 30>,
 		<&tegra_car 11>, <&tegra_car 18>, <&tegra_car 101>,
 		<&tegra_car 102>, <&tegra_car 108>, <&tegra_car 109>,
diff --git a/sound/soc/tegra/tegra20_ac97.c b/sound/soc/tegra/tegra20_ac97.c
index 6c48662..935900a 100644
--- a/sound/soc/tegra/tegra20_ac97.c
+++ b/sound/soc/tegra/tegra20_ac97.c
@@ -313,7 +313,6 @@ static int tegra20_ac97_platform_probe(struct platform_device *pdev)
 {
 	struct tegra20_ac97 *ac97;
 	struct resource *mem;
-	u32 of_dma[2];
 	void __iomem *regs;
 	int ret = 0;
 
@@ -354,14 +353,6 @@ static int tegra20_ac97_platform_probe(struct platform_device *pdev)
 		goto err_clk_put;
 	}
 
-	if (of_property_read_u32_array(pdev->dev.of_node,
-				       "nvidia,dma-request-selector",
-				       of_dma, 2) < 0) {
-		dev_err(&pdev->dev, "No DMA resource\n");
-		ret = -ENODEV;
-		goto err_clk_put;
-	}
-
 	ac97->reset_gpio = of_get_named_gpio(pdev->dev.of_node,
 					     "nvidia,codec-reset-gpio", 0);
 	if (gpio_is_valid(ac97->reset_gpio)) {
@@ -386,12 +377,16 @@ static int tegra20_ac97_platform_probe(struct platform_device *pdev)
 	ac97->capture_dma_data.addr = mem->start + TEGRA20_AC97_FIFO_RX1;
 	ac97->capture_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
 	ac97->capture_dma_data.maxburst = 4;
-	ac97->capture_dma_data.slave_id = of_dma[1];
+	ac97->filter_data_rx.dma_dev = &pdev->dev;
+	sprintf(ac97->filter_data_rx.dma_name, "rx-tx");
+	ac97->capture_dma_data.filter_data = &ac97->filter_data_rx;
 
 	ac97->playback_dma_data.addr = mem->start + TEGRA20_AC97_FIFO_TX1;
 	ac97->playback_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
 	ac97->playback_dma_data.maxburst = 4;
-	ac97->playback_dma_data.slave_id = of_dma[1];
+	ac97->filter_data_tx.dma_dev = &pdev->dev;
+	sprintf(ac97->filter_data_tx.dma_name, "rx-tx");
+	ac97->playback_dma_data.filter_data = &ac97->filter_data_tx;
 
 	ret = tegra_asoc_utils_init(&ac97->util_data, &pdev->dev);
 	if (ret)
diff --git a/sound/soc/tegra/tegra20_ac97.h b/sound/soc/tegra/tegra20_ac97.h
index 4acb3aa..ac09d34 100644
--- a/sound/soc/tegra/tegra20_ac97.h
+++ b/sound/soc/tegra/tegra20_ac97.h
@@ -86,7 +86,9 @@
 struct tegra20_ac97 {
 	struct clk *clk_ac97;
 	struct snd_dmaengine_dai_dma_data capture_dma_data;
+	struct tegra_dma_filter_data filter_data_rx;
 	struct snd_dmaengine_dai_dma_data playback_dma_data;
+	struct tegra_dma_filter_data filter_data_tx;
 	struct regmap *regmap;
 	int reset_gpio;
 	int sync_gpio;
diff --git a/sound/soc/tegra/tegra20_i2s.c b/sound/soc/tegra/tegra20_i2s.c
index 52af7f6..af98338 100644
--- a/sound/soc/tegra/tegra20_i2s.c
+++ b/sound/soc/tegra/tegra20_i2s.c
@@ -339,9 +339,7 @@ static const struct regmap_config tegra20_i2s_regmap_config = {
 static int tegra20_i2s_platform_probe(struct platform_device *pdev)
 {
 	struct tegra20_i2s *i2s;
-	struct resource *mem, *memregion, *dmareq;
-	u32 of_dma[2];
-	u32 dma_ch;
+	struct resource *mem, *memregion;
 	void __iomem *regs;
 	int ret;
 
@@ -370,20 +368,6 @@ static int tegra20_i2s_platform_probe(struct platform_device *pdev)
 		goto err_clk_put;
 	}
 
-	dmareq = platform_get_resource(pdev, IORESOURCE_DMA, 0);
-	if (!dmareq) {
-		if (of_property_read_u32_array(pdev->dev.of_node,
-					"nvidia,dma-request-selector",
-					of_dma, 2) < 0) {
-			dev_err(&pdev->dev, "No DMA resource\n");
-			ret = -ENODEV;
-			goto err_clk_put;
-		}
-		dma_ch = of_dma[1];
-	} else {
-		dma_ch = dmareq->start;
-	}
-
 	memregion = devm_request_mem_region(&pdev->dev, mem->start,
 					    resource_size(mem), DRV_NAME);
 	if (!memregion) {
@@ -410,12 +394,16 @@ static int tegra20_i2s_platform_probe(struct platform_device *pdev)
 	i2s->capture_dma_data.addr = mem->start + TEGRA20_I2S_FIFO2;
 	i2s->capture_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
 	i2s->capture_dma_data.maxburst = 4;
-	i2s->capture_dma_data.slave_id = dma_ch;
+	i2s->filter_data_rx.dma_dev = &pdev->dev;
+	sprintf(i2s->filter_data_rx.dma_name, "rx-tx");
+	i2s->capture_dma_data.filter_data = &i2s->filter_data_rx;
 
 	i2s->playback_dma_data.addr = mem->start + TEGRA20_I2S_FIFO1;
 	i2s->playback_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
 	i2s->playback_dma_data.maxburst = 4;
-	i2s->playback_dma_data.slave_id = dma_ch;
+	i2s->filter_data_tx.dma_dev = &pdev->dev;
+	sprintf(i2s->filter_data_tx.dma_name, "rx-tx");
+	i2s->playback_dma_data.filter_data = &i2s->filter_data_tx;
 
 	pm_runtime_enable(&pdev->dev);
 	if (!pm_runtime_enabled(&pdev->dev)) {
diff --git a/sound/soc/tegra/tegra20_i2s.h b/sound/soc/tegra/tegra20_i2s.h
index fa6c29c..794d487 100644
--- a/sound/soc/tegra/tegra20_i2s.h
+++ b/sound/soc/tegra/tegra20_i2s.h
@@ -156,7 +156,9 @@ struct tegra20_i2s {
 	struct snd_soc_dai_driver dai;
 	struct clk *clk_i2s;
 	struct snd_dmaengine_dai_dma_data capture_dma_data;
+	struct tegra_dma_filter_data filter_data_rx;
 	struct snd_dmaengine_dai_dma_data playback_dma_data;
+	struct tegra_dma_filter_data filter_data_tx;
 	struct regmap *regmap;
 };
 
diff --git a/sound/soc/tegra/tegra30_ahub.c b/sound/soc/tegra/tegra30_ahub.c
index d554d46..afa8a0b 100644
--- a/sound/soc/tegra/tegra30_ahub.c
+++ b/sound/soc/tegra/tegra30_ahub.c
@@ -96,7 +96,7 @@ static int tegra30_ahub_runtime_resume(struct device *dev)
 
 int tegra30_ahub_allocate_rx_fifo(enum tegra30_ahub_rxcif *rxcif,
 				  dma_addr_t *fiforeg,
-				  unsigned int *reqsel)
+				 struct tegra_dma_filter_data *filter_data)
 {
 	int channel;
 	u32 reg, val;
@@ -111,7 +111,9 @@ int tegra30_ahub_allocate_rx_fifo(enum tegra30_ahub_rxcif *rxcif,
 	*rxcif = TEGRA30_AHUB_RXCIF_APBIF_RX0 + channel;
 	*fiforeg = ahub->apbif_addr + TEGRA30_AHUB_CHANNEL_RXFIFO +
 		   (channel * TEGRA30_AHUB_CHANNEL_RXFIFO_STRIDE);
-	*reqsel = ahub->dma_sel + channel;
+
+	filter_data->dma_dev = ahub->dev;
+	sprintf(filter_data->dma_name, "channel%d", channel);
 
 	reg = TEGRA30_AHUB_CHANNEL_CTRL +
 	      (channel * TEGRA30_AHUB_CHANNEL_CTRL_STRIDE);
@@ -178,8 +180,8 @@ int tegra30_ahub_free_rx_fifo(enum tegra30_ahub_rxcif rxcif)
 EXPORT_SYMBOL_GPL(tegra30_ahub_free_rx_fifo);
 
 int tegra30_ahub_allocate_tx_fifo(enum tegra30_ahub_txcif *txcif,
-				  dma_addr_t *fiforeg,
-				  unsigned int *reqsel)
+				dma_addr_t *fiforeg,
+				struct tegra_dma_filter_data *filter_data)
 {
 	int channel;
 	u32 reg, val;
@@ -194,7 +196,9 @@ int tegra30_ahub_allocate_tx_fifo(enum tegra30_ahub_txcif *txcif,
 	*txcif = TEGRA30_AHUB_TXCIF_APBIF_TX0 + channel;
 	*fiforeg = ahub->apbif_addr + TEGRA30_AHUB_CHANNEL_TXFIFO +
 		   (channel * TEGRA30_AHUB_CHANNEL_TXFIFO_STRIDE);
-	*reqsel = ahub->dma_sel + channel;
+
+	filter_data->dma_dev = ahub->dev;
+	sprintf(filter_data->dma_name, "channel%d", channel);
 
 	reg = TEGRA30_AHUB_CHANNEL_CTRL +
 	      (channel * TEGRA30_AHUB_CHANNEL_CTRL_STRIDE);
@@ -456,7 +460,6 @@ static int tegra30_ahub_probe(struct platform_device *pdev)
 	struct clk *clk;
 	int i;
 	struct resource *res0, *res1, *region;
-	u32 of_dma[2];
 	void __iomem *regs_apbif, *regs_ahub;
 	int ret = 0;
 
@@ -513,16 +516,6 @@ static int tegra30_ahub_probe(struct platform_device *pdev)
 		goto err_clk_put_d_audio;
 	}
 
-	if (of_property_read_u32_array(pdev->dev.of_node,
-				"nvidia,dma-request-selector",
-				of_dma, 2) < 0) {
-		dev_err(&pdev->dev,
-			"Missing property nvidia,dma-request-selector\n");
-		ret = -ENODEV;
-		goto err_clk_put_d_audio;
-	}
-	ahub->dma_sel = of_dma[1];
-
 	res0 = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res0) {
 		dev_err(&pdev->dev, "No apbif memory resource\n");
diff --git a/sound/soc/tegra/tegra30_ahub.h b/sound/soc/tegra/tegra30_ahub.h
index 09766cd..3eae224 100644
--- a/sound/soc/tegra/tegra30_ahub.h
+++ b/sound/soc/tegra/tegra30_ahub.h
@@ -19,6 +19,8 @@
 #ifndef __TEGRA30_AHUB_H__
 #define __TEGRA30_AHUB_H__
 
+#include "tegra_pcm.h"
+
 /* Fields in *_CIF_RX/TX_CTRL; used by AHUB FIFOs, and all other audio modules */
 
 #define TEGRA30_AUDIOCIF_CTRL_FIFO_THRESHOLD_SHIFT	28
@@ -451,15 +453,15 @@ enum tegra30_ahub_rxcif {
 };
 
 extern int tegra30_ahub_allocate_rx_fifo(enum tegra30_ahub_rxcif *rxcif,
-					 dma_addr_t *fiforeg,
-					 unsigned int *reqsel);
+				 dma_addr_t *fiforeg,
+				 struct tegra_dma_filter_data *filter_data);
 extern int tegra30_ahub_enable_rx_fifo(enum tegra30_ahub_rxcif rxcif);
 extern int tegra30_ahub_disable_rx_fifo(enum tegra30_ahub_rxcif rxcif);
 extern int tegra30_ahub_free_rx_fifo(enum tegra30_ahub_rxcif rxcif);
 
 extern int tegra30_ahub_allocate_tx_fifo(enum tegra30_ahub_txcif *txcif,
-					 dma_addr_t *fiforeg,
-					 unsigned int *reqsel);
+				 dma_addr_t *fiforeg,
+				 struct tegra_dma_filter_data *filter_data);
 extern int tegra30_ahub_enable_tx_fifo(enum tegra30_ahub_txcif txcif);
 extern int tegra30_ahub_disable_tx_fifo(enum tegra30_ahub_txcif txcif);
 extern int tegra30_ahub_free_tx_fifo(enum tegra30_ahub_txcif txcif);
@@ -488,7 +490,6 @@ struct tegra30_ahub {
 	struct device *dev;
 	struct clk *clk_d_audio;
 	struct clk *clk_apbif;
-	int dma_sel;
 	resource_size_t apbif_addr;
 	struct regmap *regmap_apbif;
 	struct regmap *regmap_ahub;
diff --git a/sound/soc/tegra/tegra30_i2s.c b/sound/soc/tegra/tegra30_i2s.c
index d04146c..e1672c0 100644
--- a/sound/soc/tegra/tegra30_i2s.c
+++ b/sound/soc/tegra/tegra30_i2s.c
@@ -76,27 +76,16 @@ static int tegra30_i2s_startup(struct snd_pcm_substream *substream,
 			struct snd_soc_dai *dai)
 {
 	struct tegra30_i2s *i2s = snd_soc_dai_get_drvdata(dai);
-	int ret;
 
 	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
-		ret = tegra30_ahub_allocate_tx_fifo(&i2s->playback_fifo_cif,
-					&i2s->playback_dma_data.addr,
-					&i2s->playback_dma_data.slave_id);
-		i2s->playback_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
-		i2s->playback_dma_data.maxburst = 4;
 		tegra30_ahub_set_rx_cif_source(i2s->playback_i2s_cif,
 					       i2s->playback_fifo_cif);
 	} else {
-		ret = tegra30_ahub_allocate_rx_fifo(&i2s->capture_fifo_cif,
-					&i2s->capture_dma_data.addr,
-					&i2s->capture_dma_data.slave_id);
-		i2s->capture_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
-		i2s->capture_dma_data.maxburst = 4;
 		tegra30_ahub_set_rx_cif_source(i2s->capture_fifo_cif,
 					       i2s->capture_i2s_cif);
 	}
 
-	return ret;
+	return 0;
 }
 
 static void tegra30_i2s_shutdown(struct snd_pcm_substream *substream,
@@ -106,10 +95,8 @@ static void tegra30_i2s_shutdown(struct snd_pcm_substream *substream,
 
 	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
 		tegra30_ahub_unset_rx_cif_source(i2s->playback_i2s_cif);
-		tegra30_ahub_free_tx_fifo(i2s->playback_fifo_cif);
 	} else {
 		tegra30_ahub_unset_rx_cif_source(i2s->capture_fifo_cif);
-		tegra30_ahub_free_rx_fifo(i2s->capture_fifo_cif);
 	}
 }
 
@@ -412,6 +399,9 @@ static int tegra30_i2s_platform_probe(struct platform_device *pdev)
 	}
 	dev_set_drvdata(&pdev->dev, i2s);
 
+	i2s->capture_dma_data.filter_data = &i2s->filter_data_rx;
+	i2s->playback_dma_data.filter_data = &i2s->filter_data_tx;
+
 	i2s->dai = tegra30_i2s_dai_template;
 	i2s->dai.name = dev_name(&pdev->dev);
 
@@ -462,6 +452,26 @@ static int tegra30_i2s_platform_probe(struct platform_device *pdev)
 	}
 	regcache_cache_only(i2s->regmap, true);
 
+	ret = tegra30_ahub_allocate_tx_fifo(&i2s->playback_fifo_cif,
+					&i2s->playback_dma_data.addr,
+					&i2s->filter_data_tx);
+	if (ret) {
+		dev_err(&pdev->dev, "ahub allocate tx fifo failed\n");
+		goto err_clk_put;
+	}
+	ret = tegra30_ahub_allocate_rx_fifo(&i2s->capture_fifo_cif,
+					&i2s->capture_dma_data.addr,
+					&i2s->filter_data_rx);
+	if (ret) {
+		dev_err(&pdev->dev, "ahub allocate rx fifo failed\n");
+		goto err_ahub_free_tx;
+	}
+
+	i2s->playback_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+	i2s->playback_dma_data.maxburst = 4;
+	i2s->capture_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+	i2s->capture_dma_data.maxburst = 4;
+
 	pm_runtime_enable(&pdev->dev);
 	if (!pm_runtime_enabled(&pdev->dev)) {
 		ret = tegra30_i2s_runtime_resume(&pdev->dev);
@@ -492,6 +502,9 @@ err_suspend:
 		tegra30_i2s_runtime_suspend(&pdev->dev);
 err_pm_disable:
 	pm_runtime_disable(&pdev->dev);
+	tegra30_ahub_free_rx_fifo(i2s->capture_fifo_cif);
+err_ahub_free_tx:
+	tegra30_ahub_free_tx_fifo(i2s->playback_fifo_cif);
 err_clk_put:
 	clk_put(i2s->clk_i2s);
 err:
@@ -506,6 +519,9 @@ static int tegra30_i2s_platform_remove(struct platform_device *pdev)
 	if (!pm_runtime_status_suspended(&pdev->dev))
 		tegra30_i2s_runtime_suspend(&pdev->dev);
 
+	tegra30_ahub_free_rx_fifo(i2s->capture_fifo_cif);
+	tegra30_ahub_free_tx_fifo(i2s->playback_fifo_cif);
+
 	tegra_pcm_platform_unregister(&pdev->dev);
 	snd_soc_unregister_component(&pdev->dev);
 
diff --git a/sound/soc/tegra/tegra30_i2s.h b/sound/soc/tegra/tegra30_i2s.h
index bea23af..73f5650 100644
--- a/sound/soc/tegra/tegra30_i2s.h
+++ b/sound/soc/tegra/tegra30_i2s.h
@@ -232,9 +232,11 @@ struct tegra30_i2s {
 	enum tegra30_ahub_txcif capture_i2s_cif;
 	enum tegra30_ahub_rxcif capture_fifo_cif;
 	struct snd_dmaengine_dai_dma_data capture_dma_data;
+	struct tegra_dma_filter_data filter_data_rx;
 	enum tegra30_ahub_rxcif playback_i2s_cif;
 	enum tegra30_ahub_txcif playback_fifo_cif;
 	struct snd_dmaengine_dai_dma_data playback_dma_data;
+	struct tegra_dma_filter_data filter_data_tx;
 	struct regmap *regmap;
 };
 
diff --git a/sound/soc/tegra/tegra_pcm.c b/sound/soc/tegra/tegra_pcm.c
index f056f63..3baea16 100644
--- a/sound/soc/tegra/tegra_pcm.c
+++ b/sound/soc/tegra/tegra_pcm.c
@@ -53,8 +53,22 @@ static const struct snd_pcm_hardware tegra_pcm_hardware = {
 	.fifo_size		= 4,
 };
 
+static struct dma_chan *tegra_pcm_request_chan(struct snd_soc_pcm_runtime *rtd,
+	struct snd_pcm_substream *substream)
+{
+	struct snd_dmaengine_dai_dma_data *dma_data;
+	struct tegra_dma_filter_data *filter_data;
+
+	dma_data = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
+	filter_data = dma_data->filter_data;
+
+	return dma_request_slave_channel(filter_data->dma_dev,
+					filter_data->dma_name);
+}
+
 static const struct snd_dmaengine_pcm_config tegra_dmaengine_pcm_config = {
 	.pcm_hardware = &tegra_pcm_hardware,
+	.compat_request_channel = tegra_pcm_request_chan,
 	.prepare_slave_config = snd_dmaengine_pcm_prepare_slave_config,
 	.compat_filter_fn = NULL,
 	.prealloc_buffer_size = PAGE_SIZE * 8,
diff --git a/sound/soc/tegra/tegra_pcm.h b/sound/soc/tegra/tegra_pcm.h
index 68ad901..8c0b1eb 100644
--- a/sound/soc/tegra/tegra_pcm.h
+++ b/sound/soc/tegra/tegra_pcm.h
@@ -31,6 +31,19 @@
 #ifndef __TEGRA_PCM_H__
 #define __TEGRA_PCM_H__
 
+#define TEGRA_DMA_NAME_MAX_LEN	10
+
+/*
+ * Generic DMA DT binding needs the device that raise dma request and dma name
+ * to request a dma channel. tegra30_i2s is a special case. It should be ahub
+ * device and it also has dma name that cannot handled by ASoC dmaengine code.
+ * So we pass the info using filter data in snd_dmaengine_dai_dma_data.
+ */
+struct tegra_dma_filter_data {
+	struct device *dma_dev;
+	char dma_name[TEGRA_DMA_NAME_MAX_LEN];
+};
+
 int tegra_pcm_platform_register(struct device *dev);
 void tegra_pcm_platform_unregister(struct device *dev);
 
-- 
1.8.1.5

[PATCH 8/9] ARM: dts: tegra: remove legacy nvidia,dma-request-selector properties

[Richard Zhao]

All tegra dma client drivers have moved to generic dma binding.

Signed-off-by: Richard Zhao <rizhao@nvidia.com>
---
 arch/arm/boot/dts/tegra114.dtsi | 14 --------------
 arch/arm/boot/dts/tegra20.dtsi  | 13 -------------
 arch/arm/boot/dts/tegra30.dtsi  | 12 ------------
 3 files changed, 39 deletions(-)

diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi
index b133c62..e696cbce 100644
--- a/arch/arm/boot/dts/tegra114.dtsi
+++ b/arch/arm/boot/dts/tegra114.dtsi
@@ -125,7 +125,6 @@
 		reg = <0x70006000 0x40>;
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
-		nvidia,dma-request-selector = <&apbdma 8>;
 		dmas = <&apbdma 8>;
 		dma-names = "rx-tx";
 		status = "disabled";
@@ -137,7 +136,6 @@
 		reg = <0x70006040 0x40>;
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-		nvidia,dma-request-selector = <&apbdma 9>;
 		dmas = <&apbdma 9>;
 		dma-names = "rx-tx";
 		status = "disabled";
@@ -149,7 +147,6 @@
 		reg = <0x70006200 0x100>;
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-		nvidia,dma-request-selector = <&apbdma 10>;
 		dmas = <&apbdma 10>;
 		dma-names = "rx-tx";
 		status = "disabled";
@@ -161,7 +158,6 @@
 		reg = <0x70006300 0x100>;
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
-		nvidia,dma-request-selector = <&apbdma 19>;
 		dmas = <&apbdma 19>;
 		dma-names = "rx-tx";
 		status = "disabled";
@@ -235,7 +231,6 @@
 		compatible = "nvidia,tegra114-spi";
 		reg = <0x7000d400 0x200>;
 		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
-		nvidia,dma-request-selector = <&apbdma 15>;
 		dmas = <&apbdma 15>;
 		dma-names = "rx-tx";
 		#address-cells = <1>;
@@ -249,7 +244,6 @@
 		compatible = "nvidia,tegra114-spi";
 		reg = <0x7000d600 0x200>;
 		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
-		nvidia,dma-request-selector = <&apbdma 16>;
 		dmas = <&apbdma 16>;
 		dma-names = "rx-tx";
 		#address-cells = <1>;
@@ -263,7 +257,6 @@
 		compatible = "nvidia,tegra114-spi";
 		reg = <0x7000d800 0x200>;
 		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
-		nvidia,dma-request-selector = <&apbdma 17>;
 		dmas = <&apbdma 17>;
 		dma-names = "rx-tx";
 		#address-cells = <1>;
@@ -277,7 +270,6 @@
 		compatible = "nvidia,tegra114-spi";
 		reg = <0x7000da00 0x200>;
 		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
-		nvidia,dma-request-selector = <&apbdma 18>;
 		dmas = <&apbdma 18>;
 		dma-names = "rx-tx";
 		#address-cells = <1>;
@@ -291,7 +283,6 @@
 		compatible = "nvidia,tegra114-spi";
 		reg = <0x7000dc00 0x200>;
 		interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
-		nvidia,dma-request-selector = <&apbdma 27>;
 		dmas = <&apbdma 27>;
 		dma-names = "rx-tx";
 		#address-cells = <1>;
@@ -305,7 +296,6 @@
 		compatible = "nvidia,tegra114-spi";
 		reg = <0x7000de00 0x200>;
 		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-		nvidia,dma-request-selector = <&apbdma 28>;
 		dmas = <&apbdma 28>;
 		dma-names = "rx-tx";
 		#address-cells = <1>;
@@ -354,10 +344,6 @@
 		      <0x70080200 0x100>,
 		      <0x70081000 0x200>;
 		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-		nvidia,dma-request-selector = <&apbdma 1>, <&apbdma 2>,
-			<&apbdma 3>, <&apbdma 4>, <&apbdma 6>, <&apbdma 7>,
-			<&apbdma 12>, <&apbdma 13>, <&apbdma 14>,
-			<&apbdma 29>;
 		dmas = <&apbdma 1>, <&apbdma 2>, <&apbdma 3>, <&apbdma 4>,
 			<&apbdma 6>, <&apbdma 7>, <&apbdma 12>, <&apbdma 13>,
 			<&apbdma 14>, <&apbdma 29>;
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index 0fe7f37..7ca0ccb 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -223,7 +223,6 @@
 		compatible = "nvidia,tegra20-ac97";
 		reg = <0x70002000 0x200>;
 		interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
-		nvidia,dma-request-selector = <&apbdma 12>;
 		dmas = <&apbdma 12>;
 		dma-names = "rx-tx";
 		clocks = <&tegra_car TEGRA20_CLK_AC97>;
@@ -234,7 +233,6 @@
 		compatible = "nvidia,tegra20-i2s";
 		reg = <0x70002800 0x200>;
 		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
-		nvidia,dma-request-selector = <&apbdma 2>;
 		dmas = <&apbdma 2>;
 		dma-names = "rx-tx";
 		clocks = <&tegra_car TEGRA20_CLK_I2S1>;
@@ -245,7 +243,6 @@
 		compatible = "nvidia,tegra20-i2s";
 		reg = <0x70002a00 0x200>;
 		interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
-		nvidia,dma-request-selector = <&apbdma 1>;
 		dmas = <&apbdma 1>;
 		dma-names = "rx-tx";
 		clocks = <&tegra_car TEGRA20_CLK_I2S2>;
@@ -264,7 +261,6 @@
 		reg = <0x70006000 0x40>;
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
-		nvidia,dma-request-selector = <&apbdma 8>;
 		dmas = <&apbdma 8>;
 		dma-names = "rx-tx";
 		clocks = <&tegra_car TEGRA20_CLK_UARTA>;
@@ -276,7 +272,6 @@
 		reg = <0x70006040 0x40>;
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-		nvidia,dma-request-selector = <&apbdma 9>;
 		dmas = <&apbdma 9>;
 		dma-names = "rx-tx";
 		clocks = <&tegra_car TEGRA20_CLK_UARTB>;
@@ -288,7 +283,6 @@
 		reg = <0x70006200 0x100>;
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-		nvidia,dma-request-selector = <&apbdma 10>;
 		dmas = <&apbdma 10>;
 		dma-names = "rx-tx";
 		clocks = <&tegra_car TEGRA20_CLK_UARTC>;
@@ -300,7 +294,6 @@
 		reg = <0x70006300 0x100>;
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
-		nvidia,dma-request-selector = <&apbdma 19>;
 		dmas = <&apbdma 19>;
 		dma-names = "rx-tx";
 		clocks = <&tegra_car TEGRA20_CLK_UARTD>;
@@ -312,7 +305,6 @@
 		reg = <0x70006400 0x100>;
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
-		nvidia,dma-request-selector = <&apbdma 20>;
 		dmas = <&apbdma 20>;
 		dma-names = "rx-tx";
 		clocks = <&tegra_car TEGRA20_CLK_UARTE>;
@@ -350,7 +342,6 @@
 		compatible = "nvidia,tegra20-sflash";
 		reg = <0x7000c380 0x80>;
 		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
-		nvidia,dma-request-selector = <&apbdma 11>;
 		dmas = <&apbdma 11>;
 		dma-names = "rx-tx";
 		#address-cells = <1>;
@@ -399,7 +390,6 @@
 		compatible = "nvidia,tegra20-slink";
 		reg = <0x7000d400 0x200>;
 		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
-		nvidia,dma-request-selector = <&apbdma 15>;
 		dmas = <&apbdma 15>;
 		dma-names = "rx-tx";
 		#address-cells = <1>;
@@ -412,7 +402,6 @@
 		compatible = "nvidia,tegra20-slink";
 		reg = <0x7000d600 0x200>;
 		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
-		nvidia,dma-request-selector = <&apbdma 16>;
 		dmas = <&apbdma 16>;
 		dma-names = "rx-tx";
 		#address-cells = <1>;
@@ -425,7 +414,6 @@
 		compatible = "nvidia,tegra20-slink";
 		reg = <0x7000d800 0x200>;
 		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
-		nvidia,dma-request-selector = <&apbdma 17>;
 		dmas = <&apbdma 17>;
 		dma-names = "rx-tx";
 		#address-cells = <1>;
@@ -438,7 +426,6 @@
 		compatible = "nvidia,tegra20-slink";
 		reg = <0x7000da00 0x200>;
 		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
-		nvidia,dma-request-selector = <&apbdma 18>;
 		dmas = <&apbdma 18>;
 		dma-names = "rx-tx";
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index c266316..729c853 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -245,7 +245,6 @@
 		reg = <0x70006000 0x40>;
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
-		nvidia,dma-request-selector = <&apbdma 8>;
 		dmas = <&apbdma 8>;
 		dma-names = "rx-tx";
 		clocks = <&tegra_car TEGRA30_CLK_UARTA>;
@@ -257,7 +256,6 @@
 		reg = <0x70006040 0x40>;
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-		nvidia,dma-request-selector = <&apbdma 9>;
 		dmas = <&apbdma 9>;
 		dma-names = "rx-tx";
 		clocks = <&tegra_car TEGRA30_CLK_UARTB>;
@@ -269,7 +267,6 @@
 		reg = <0x70006200 0x100>;
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-		nvidia,dma-request-selector = <&apbdma 10>;
 		dmas = <&apbdma 10>;
 		dma-names = "rx-tx";
 		clocks = <&tegra_car TEGRA30_CLK_UARTC>;
@@ -281,7 +278,6 @@
 		reg = <0x70006300 0x100>;
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
-		nvidia,dma-request-selector = <&apbdma 19>;
 		dmas = <&apbdma 19>;
 		dma-names = "rx-tx";
 		clocks = <&tegra_car TEGRA30_CLK_UARTD>;
@@ -293,7 +289,6 @@
 		reg = <0x70006400 0x100>;
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
-		nvidia,dma-request-selector = <&apbdma 20>;
 		dmas = <&apbdma 20>;
 		dma-names = "rx-tx";
 		clocks = <&tegra_car TEGRA30_CLK_UARTE>;
@@ -379,7 +374,6 @@
 		compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
 		reg = <0x7000d400 0x200>;
 		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
-		nvidia,dma-request-selector = <&apbdma 15>;
 		dmas = <&apbdma 15>;
 		dma-names = "rx-tx";
 		#address-cells = <1>;
@@ -392,7 +386,6 @@
 		compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
 		reg = <0x7000d600 0x200>;
 		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
-		nvidia,dma-request-selector = <&apbdma 16>;
 		dmas = <&apbdma 16>;
 		dma-names = "rx-tx";
 		#address-cells = <1>;
@@ -405,7 +398,6 @@
 		compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
 		reg = <0x7000d800 0x200>;
 		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
-		nvidia,dma-request-selector = <&apbdma 17>;
 		dmas = <&apbdma 17>;
 		dma-names = "rx-tx";
 		#address-cells = <1>;
@@ -418,7 +410,6 @@
 		compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
 		reg = <0x7000da00 0x200>;
 		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
-		nvidia,dma-request-selector = <&apbdma 18>;
 		dmas = <&apbdma 18>;
 		dma-names = "rx-tx";
 		#address-cells = <1>;
@@ -431,7 +422,6 @@
 		compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
 		reg = <0x7000dc00 0x200>;
 		interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
-		nvidia,dma-request-selector = <&apbdma 27>;
 		dmas = <&apbdma 27>;
 		dma-names = "rx-tx";
 		#address-cells = <1>;
@@ -444,7 +434,6 @@
 		compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
 		reg = <0x7000de00 0x200>;
 		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-		nvidia,dma-request-selector = <&apbdma 28>;
 		dmas = <&apbdma 28>;
 		dma-names = "rx-tx";
 		#address-cells = <1>;
@@ -492,7 +481,6 @@
 		reg = <0x70080000 0x200
 		       0x70080200 0x100>;
 		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-		nvidia,dma-request-selector = <&apbdma 1>;
 		dmas = <&apbdma 1>, <&apbdma 2>, <&apbdma 3>, <&apbdma 4>;
 		dma-names = "channel0", "channel1", "channel2", "channel3";
 		clocks = <&tegra_car TEGRA30_CLK_D_AUDIO>,
-- 
1.8.1.5

[PATCH 9/9] dma: tegra20-apbdma: remove legacy nvidia,dma-request-selector support

[Richard Zhao]

All tegra dma client drivers have moved to generic dma binding.

Signed-off-by: Richard Zhao <rizhao@nvidia.com>
---
 drivers/dma/tegra20-apb-dma.c | 8 --------
 1 file changed, 8 deletions(-)

diff --git a/drivers/dma/tegra20-apb-dma.c b/drivers/dma/tegra20-apb-dma.c
index 0e12f78..a67d159 100644
--- a/drivers/dma/tegra20-apb-dma.c
+++ b/drivers/dma/tegra20-apb-dma.c
@@ -344,13 +344,6 @@ static int tegra_dma_slave_config(struct dma_chan *dc,
 
 	memcpy(&tdc->dma_sconfig, sconfig, sizeof(*sconfig));
 
-	/* If we didn't get slave_id from DT when request channel, use the one
-	 * passed here.
-	 * It makes compatible with legacy nvidia,dma-request-selector.
-	 */
-	if (tdc->slave_id == -EINVAL)
-		tdc->slave_id = sconfig->slave_id;
-
 	tdc->config_init = true;
 	return 0;
 }
@@ -1374,7 +1367,6 @@ static int tegra_dma_probe(struct platform_device *pdev)
 				&tdma->dma_dev.channels);
 		tdc->tdma = tdma;
 		tdc->id = i;
-		tdc->slave_id = -EINVAL;
 
 		tasklet_init(&tdc->tasklet, tegra_dma_tasklet,
 				(unsigned long)tdc);
-- 
1.8.1.5

Re: [PATCH 7/9] ASoC: tegra: move to generic DMA DT binding

[Lars-Peter Clausen]

On 07/24/2013 06:10 AM, Richard Zhao wrote:
> - add tegra_dma_filter_data to specify dma info
>    DMA DT binding needs the device that raise dma request and dma name
>    to request a dma channel. tegra30_i2s is a special case. It should be ahub
>    device and it also has dma name that cannot handled by ASoC dmaengine code.
>    So we pass the info using filter data in snd_dmaengine_dai_dma_data.

How about extending the generic dmaengine PCM driver so that it is possible to 
specify the the DMA channel names? I think that will make the code a bit 
simpler and also allow you to remove tegra_pcm.c completely eventually.

- Lars

Re: [PATCH 0/9] ARM: tegra: move to generic DMA DT binding

[Stephen Warren]

On 07/23/2013 10:09 PM, Richard Zhao wrote:
> The patch series aim to move apbdma to generic DT binding.
> 
> Changes:
> - It add dmas/dma-names properties while leave
>   nvidia,dma-request-selector to be compatible.
> - update apbdma driver and dma client drivers
> - ASoC tegra adds a new struct to pass device and dma-name.
> - at last, remove legacy nvidia,dma-request-selector

I would like to take this series through the Tegra tree to simplify
dependencies. So, I'm looking for ack's on the drivers rather than for
them to be applied. I had hoped Richard would point this out when
posting the patches.

Re: [PATCH 3/9] spi: tegra114: move to generic dma DT binding

[Stephen Warren]

(Stripping CC list a bit)

On 07/23/2013 10:09 PM, Richard Zhao wrote:
> - driver: remove use of nvidia,dma-request-selector
> 	  use dma_request_slave_channel to request channel
> - if dmas/dma-names are missing, it still supports cpu based transfer
> - update binding doc and specify dmas/dma-names properties as optional

I'll simply repeat the comments I already made downstream:

Most commit messages aren't written as bullet points. This might be
better written as:

----------
Convert the Tegra114 SPI driver to support the standard DMA device-tree
bindings.

Note that DMA mode is optional; if the DT properties required to support
DMA are missing, then the driver will fall back to pure CPU operation.
----------

> diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt b/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt

> +Optional properties:
> +- dmas : The Tegra DMA controller's phandle and request selector for
> +  this SPI controller.
> +- dma-names : Should be "rx-tx".

This should reference dma.txt which defines the DMA DT bindings. How about:

----------
Optional properties:
- dmas, dma-names : The DMA channel to use for DMA-mode operation. See
  dma.txt for the definition of these properties. A single entry named
  "rx-tx" must be specified.
----------

Re: [PATCH 6/9] serial: tegra: move to generic dma DT binding

[Stephen Warren]

On 07/23/2013 10:09 PM, Richard Zhao wrote:
> - driver: remove use of nvidia,dma-request-selector
> 	  use dma_request_slave_channel to request channel
> - update binding doc

This patch needs to be amended so that the DMA channel is looked up
during probe() rather than open(), to guarantee that deferred probe
works. It's possible to hold off probe, but not possible AFAIK to hold
off opening the port.

Re: [PATCH 6/9] serial: tegra: move to generic dma DT binding

[Stephen Warren]

On 07/26/2013 01:39 PM, Stephen Warren wrote:
> On 07/23/2013 10:09 PM, Richard Zhao wrote:
>> - driver: remove use of nvidia,dma-request-selector
>> 	  use dma_request_slave_channel to request channel
>> - update binding doc
> 
> This patch needs to be amended so that the DMA channel is looked up
> during probe() rather than open(), to guarantee that deferred probe
> works. It's possible to hold off probe, but not possible AFAIK to hold
> off opening the port.

Hmm. I guess this comment actually applies to all/most of these patches.

Re: [PATCH 3/9] spi: tegra114: move to generic dma DT binding

[Richard Zhao]

On Sat, Jul 27, 2013 at 03:34:43AM +0800, Stephen Warren wrote:
> (Stripping CC list a bit)
> 
> On 07/23/2013 10:09 PM, Richard Zhao wrote:
> > - driver: remove use of nvidia,dma-request-selector
> > 	  use dma_request_slave_channel to request channel
> > - if dmas/dma-names are missing, it still supports cpu based transfer
> > - update binding doc and specify dmas/dma-names properties as optional
> 
> I'll simply repeat the comments I already made downstream:
> 
> Most commit messages aren't written as bullet points. 
Alright, I'll change it. (Personally I like bullet points).
> This might be
> better written as:
> 
> ----------
> Convert the Tegra114 SPI driver to support the standard DMA device-tree
> bindings.
> 
> Note that DMA mode is optional; if the DT properties required to support
> DMA are missing, then the driver will fall back to pure CPU operation.
> ----------
> 
> > diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt b/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt
> 
> > +Optional properties:
> > +- dmas : The Tegra DMA controller's phandle and request selector for
> > +  this SPI controller.
> > +- dma-names : Should be "rx-tx".
> 
> This should reference dma.txt which defines the DMA DT bindings. How about:
> 
> ----------
> Optional properties:
> - dmas, dma-names : The DMA channel to use for DMA-mode operation. See
>   dma.txt for the definition of these properties. A single entry named
>   "rx-tx" must be specified.
> ----------
Ok. but how about replace "DMA channel" with "DMA request"?

Thanks
Richard

Re: [PATCH 6/9] serial: tegra: move to generic dma DT binding

[Richard Zhao]

On Sat, Jul 27, 2013 at 03:39:15AM +0800, Stephen Warren wrote:
> On 07/23/2013 10:09 PM, Richard Zhao wrote:
> > - driver: remove use of nvidia,dma-request-selector
> > 	  use dma_request_slave_channel to request channel
> > - update binding doc
> 
> This patch needs to be amended so that the DMA channel is looked up
> during probe() rather than open(), to guarantee that deferred probe
> works. It's possible to hold off probe, but not possible AFAIK to hold
> off opening the port.
How about avoid return -EPROBE_DEFER at open() time? It can be in
another patch.

Thanks
Richard

Re: [PATCH 3/9] spi: tegra114: move to generic dma DT binding

[Stephen Warren]

On 07/29/2013 09:15 PM, Richard Zhao wrote:
> On Sat, Jul 27, 2013 at 03:34:43AM +0800, Stephen Warren wrote:
>> (Stripping CC list a bit)
>>
>> On 07/23/2013 10:09 PM, Richard Zhao wrote:
>>> - driver: remove use of nvidia,dma-request-selector
>>> 	  use dma_request_slave_channel to request channel
>>> - if dmas/dma-names are missing, it still supports cpu based transfer
>>> - update binding doc and specify dmas/dma-names properties as optional

>>> diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt b/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt
>>
>>> +Optional properties:
>>> +- dmas : The Tegra DMA controller's phandle and request selector for
>>> +  this SPI controller.
>>> +- dma-names : Should be "rx-tx".
>>
>> This should reference dma.txt which defines the DMA DT bindings. How about:
>>
>> ----------
>> Optional properties:
>> - dmas, dma-names : The DMA channel to use for DMA-mode operation. See
>>   dma.txt for the definition of these properties. A single entry named
>>   "rx-tx" must be specified.
>> ----------
> Ok. but how about replace "DMA channel" with "DMA request"?

Sure.

Re: [PATCH 6/9] serial: tegra: move to generic dma DT binding

[Stephen Warren]

On 07/29/2013 09:31 PM, Richard Zhao wrote:
> On Sat, Jul 27, 2013 at 03:39:15AM +0800, Stephen Warren wrote:
>> On 07/23/2013 10:09 PM, Richard Zhao wrote:
>>> - driver: remove use of nvidia,dma-request-selector
>>> 	  use dma_request_slave_channel to request channel
>>> - update binding doc
>>
>> This patch needs to be amended so that the DMA channel is looked up
>> during probe() rather than open(), to guarantee that deferred probe
>> works. It's possible to hold off probe, but not possible AFAIK to hold
>> off opening the port.
>
> How about avoid return -EPROBE_DEFER at open() time? It can be in
> another patch.

I don't really understand what you mean. -EPROBE_DEFER is something that
only makes sense for probe() to return (or functions used by probe()).
It doesn't make sense to return it anywhere else, since probe deferral
is something that can only happen for probe().

Re: [PATCH 6/9] serial: tegra: move to generic dma DT binding

[Richard Zhao]

On Wed, Jul 31, 2013 at 12:46:42AM +0800, Stephen Warren wrote:
> On 07/29/2013 09:31 PM, Richard Zhao wrote:
> > On Sat, Jul 27, 2013 at 03:39:15AM +0800, Stephen Warren wrote:
> >> On 07/23/2013 10:09 PM, Richard Zhao wrote:
> >>> - driver: remove use of nvidia,dma-request-selector
> >>> 	  use dma_request_slave_channel to request channel
> >>> - update binding doc
> >>
> >> This patch needs to be amended so that the DMA channel is looked up
> >> during probe() rather than open(), to guarantee that deferred probe
> >> works. It's possible to hold off probe, but not possible AFAIK to hold
> >> off opening the port.
> >
> > How about avoid return -EPROBE_DEFER at open() time? It can be in
> > another patch.
> 
> I don't really understand what you mean. -EPROBE_DEFER is something that
> only makes sense for probe() to return (or functions used by probe()).
> It doesn't make sense to return it anywhere else, since probe deferral
> is something that can only happen for probe().
What I meant is, it might not worth to move request channel to probe
only because we need to check error and return -EPROBE_DEFER.

dma_request_slave_channel is better to be called as late as possible to
make better dynamic use of dma channels.

Actually, I searched the kernel code, most drivers don't return EPROBE_DEFER
when dma_request_slave_channel failed. dma_request_slave_channel can
fail in many cases, and dma device not probed is only one case.

Thanks
Richard

Re: [PATCH 6/9] serial: tegra: move to generic dma DT binding

[Stephen Warren]

On 07/30/2013 09:45 PM, Richard Zhao wrote:
> On Wed, Jul 31, 2013 at 12:46:42AM +0800, Stephen Warren wrote:
>> On 07/29/2013 09:31 PM, Richard Zhao wrote:
>>> On Sat, Jul 27, 2013 at 03:39:15AM +0800, Stephen Warren wrote:
>>>> On 07/23/2013 10:09 PM, Richard Zhao wrote:
>>>>> - driver: remove use of nvidia,dma-request-selector
>>>>> 	  use dma_request_slave_channel to request channel
>>>>> - update binding doc
>>>>
>>>> This patch needs to be amended so that the DMA channel is looked up
>>>> during probe() rather than open(), to guarantee that deferred probe
>>>> works. It's possible to hold off probe, but not possible AFAIK to hold
>>>> off opening the port.
>>>
>>> How about avoid return -EPROBE_DEFER at open() time? It can be in
>>> another patch.
>>
>> I don't really understand what you mean. -EPROBE_DEFER is something that
>> only makes sense for probe() to return (or functions used by probe()).
>> It doesn't make sense to return it anywhere else, since probe deferral
>> is something that can only happen for probe().
>
> What I meant is, it might not worth to move request channel to probe
> only because we need to check error and return -EPROBE_DEFER.

If probe() doesn't attempt to validate that the/a DMA channel provider
exists, then there's no guarantee that the DMA provider has probed
before the DMA client driver either probes or executes any later code.
So, you could quite easily end up with a situation where the serial
driver's open fails because the DMA provider has not yet probed. This is
exactly what deferred probe was intended to avoid. This reason alone is
enough to make it worth fixing this.

> dma_request_slave_channel is better to be called as late as possible to
> make better dynamic use of dma channels.

probe() could validate that the provider exists in a way that doesn't
permanently hold ownership of the DMA channel. For example, request it
then immediately release it, in the absence of a dedicated "validate my
DMA providers exist" API.

> Actually, I searched the kernel code, most drivers don't return EPROBE_DEFER
> when dma_request_slave_channel failed. dma_request_slave_channel can
> fail in many cases, and dma device not probed is only one case.

That sounds like a bug. If a DMA channel /is/ specified, it should be
possible to acquire it. If no DMA channel is specified, and if the
device can do PIO, then it's reasonable to continue.

Re: [PATCH 6/9] serial: tegra: move to generic dma DT binding

[Richard Zhao]

On Thu, Aug 01, 2013 at 05:32:37AM +0800, Stephen Warren wrote:
> On 07/30/2013 09:45 PM, Richard Zhao wrote:
> > On Wed, Jul 31, 2013 at 12:46:42AM +0800, Stephen Warren wrote:
> >> On 07/29/2013 09:31 PM, Richard Zhao wrote:
> >>> On Sat, Jul 27, 2013 at 03:39:15AM +0800, Stephen Warren wrote:
> >>>> On 07/23/2013 10:09 PM, Richard Zhao wrote:
> >>>>> - driver: remove use of nvidia,dma-request-selector
> >>>>> 	  use dma_request_slave_channel to request channel
> >>>>> - update binding doc
> >>>>
> >>>> This patch needs to be amended so that the DMA channel is looked up
> >>>> during probe() rather than open(), to guarantee that deferred probe
> >>>> works. It's possible to hold off probe, but not possible AFAIK to hold
> >>>> off opening the port.
> >>>
> >>> How about avoid return -EPROBE_DEFER at open() time? It can be in
> >>> another patch.
> >>
> >> I don't really understand what you mean. -EPROBE_DEFER is something that
> >> only makes sense for probe() to return (or functions used by probe()).
> >> It doesn't make sense to return it anywhere else, since probe deferral
> >> is something that can only happen for probe().
> >
> > What I meant is, it might not worth to move request channel to probe
> > only because we need to check error and return -EPROBE_DEFER.
> 
> If probe() doesn't attempt to validate that the/a DMA channel provider
> exists, then there's no guarantee that the DMA provider has probed
> before the DMA client driver either probes or executes any later code.

I'm not against defer probe, but dma_request_slave_channel might not be
the right function. Ideally dma channels are allocated at open() time
and dma controller loaded checking is at probe() time. So there's
better some function called check_dma_controller_loaded(), or we could
also use initcalls to let dma driver probe earlier.

This patch intend to be simple to only change the binding.

> So, you could quite easily end up with a situation where the serial
> driver's open fails because the DMA provider has not yet probed. This is
> exactly what deferred probe was intended to avoid. This reason alone is
> enough to make it worth fixing this.
> 
> > dma_request_slave_channel is better to be called as late as possible to
> > make better dynamic use of dma channels.
> 
> probe() could validate that the provider exists in a way that doesn't
> permanently hold ownership of the DMA channel. For example, request it
> then immediately release it, in the absence of a dedicated "validate my
> DMA providers exist" API.

It's ugly but may work. The current driver didn't check dma controller
loaded at probe time. Let's leave the task to another patch?

> 
> > Actually, I searched the kernel code, most drivers don't return EPROBE_DEFER
> > when dma_request_slave_channel failed. dma_request_slave_channel can
> > fail in many cases, and dma device not probed is only one case.
> 
> That sounds like a bug. If a DMA channel /is/ specified, it should be
> possible to acquire it. If no DMA channel is specified, and if the
> device can do PIO, then it's reasonable to continue.
Idealy when dma_request_slave_channel failed at open time, it can also
move to PIO.

Thanks
Richard

Re: [PATCH 6/9] serial: tegra: move to generic dma DT binding

[Stephen Warren]

On 07/31/2013 09:30 PM, Richard Zhao wrote:
> On Thu, Aug 01, 2013 at 05:32:37AM +0800, Stephen Warren wrote:
>> On 07/30/2013 09:45 PM, Richard Zhao wrote:
>>> On Wed, Jul 31, 2013 at 12:46:42AM +0800, Stephen Warren wrote:
>>>> On 07/29/2013 09:31 PM, Richard Zhao wrote:
>>>>> On Sat, Jul 27, 2013 at 03:39:15AM +0800, Stephen Warren wrote:
>>>>>> On 07/23/2013 10:09 PM, Richard Zhao wrote:
>>>>>>> - driver: remove use of nvidia,dma-request-selector
>>>>>>> 	  use dma_request_slave_channel to request channel
>>>>>>> - update binding doc
>>>>>>
>>>>>> This patch needs to be amended so that the DMA channel is looked up
>>>>>> during probe() rather than open(), to guarantee that deferred probe
>>>>>> works. It's possible to hold off probe, but not possible AFAIK to hold
>>>>>> off opening the port.
>>>>>
>>>>> How about avoid return -EPROBE_DEFER at open() time? It can be in
>>>>> another patch.
>>>>
>>>> I don't really understand what you mean. -EPROBE_DEFER is something that
>>>> only makes sense for probe() to return (or functions used by probe()).
>>>> It doesn't make sense to return it anywhere else, since probe deferral
>>>> is something that can only happen for probe().
>>>
>>> What I meant is, it might not worth to move request channel to probe
>>> only because we need to check error and return -EPROBE_DEFER.
>>
>> If probe() doesn't attempt to validate that the/a DMA channel provider
>> exists, then there's no guarantee that the DMA provider has probed
>> before the DMA client driver either probes or executes any later code.
> 
> I'm not against defer probe, but dma_request_slave_channel might not be
> the right function. Ideally dma channels are allocated at open() time
> and dma controller loaded checking is at probe() time. So there's
> better some function called check_dma_controller_loaded(), or we could
> also use initcalls to let dma driver probe earlier.
> 
> This patch intend to be simple to only change the binding.
> 
>> So, you could quite easily end up with a situation where the serial
>> driver's open fails because the DMA provider has not yet probed. This is
>> exactly what deferred probe was intended to avoid. This reason alone is
>> enough to make it worth fixing this.
>>
>>> dma_request_slave_channel is better to be called as late as possible to
>>> make better dynamic use of dma channels.
>>
>> probe() could validate that the provider exists in a way that doesn't
>> permanently hold ownership of the DMA channel. For example, request it
>> then immediately release it, in the absence of a dedicated "validate my
>> DMA providers exist" API.
> 
> It's ugly but may work. The current driver didn't check dma controller
> loaded at probe time. Let's leave the task to another patch?

I suppose it's fine to solve this later, although it seems quite
dangerous. You'd need to undo all the changes that alter where the DMA
channels are acquired in order to satisfy your argument though.