linux-serial.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Peter Hurley <peter@hurleysoftware.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-kernel@vger.kernel.org, linux-serial@vger.kernel.org,
	Peter Hurley <peter@hurleysoftware.com>,
	Seth Bollinger <sethb@digi.com>,
	"David S. Miller" <davem@davemloft.net>,
	Sam Ravnborg <sam@ravnborg.org>,
	Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Subject: [PATCH 1/2] serial: Test for no tx data on tx restart
Date: Sun,  6 Jul 2014 11:29:52 -0400	[thread overview]
Message-ID: <1404660593-12172-2-git-send-email-peter@hurleysoftware.com> (raw)
In-Reply-To: <1404660593-12172-1-git-send-email-peter@hurleysoftware.com>

Commit 717f3bbab3c7628736ef738fdbf3d9a28578c26c,
'serial_core: Fix conditional start_tx on ring buffer not empty'
exposes an incorrect assumption in several drivers' start_tx methods;
the tx ring buffer can, in fact, be empty when restarting tx while
performing flow control.

Affected drivers:
sunsab.c
ip22zilog.c
pmac_zilog.c
sunzilog.c
m32r_sio.c
imx.c

Other in-tree serial drivers either are not affected or already
test for empty tx ring buffer before transmitting.

Test for empty tx ring buffer in start_tx() method, after transmitting
x_char (if applicable).

Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Seth Bollinger <sethb@digi.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
 drivers/tty/serial/imx.c        | 3 +++
 drivers/tty/serial/ip22zilog.c  | 2 ++
 drivers/tty/serial/m32r_sio.c   | 8 +++++---
 drivers/tty/serial/pmac_zilog.c | 3 +++
 drivers/tty/serial/sunsab.c     | 3 +++
 drivers/tty/serial/sunzilog.c   | 2 ++
 6 files changed, 18 insertions(+), 3 deletions(-)

diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 3b6c1a2..23c1dae 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -563,6 +563,9 @@ static void imx_start_tx(struct uart_port *port)
 	struct imx_port *sport = (struct imx_port *)port;
 	unsigned long temp;
 
+	if (uart_circ_empty(&port.state->xmit))
+		return;
+
 	if (USE_IRDA(sport)) {
 		/* half duplex in IrDA mode; have to disable receive mode */
 		temp = readl(sport->port.membase + UCR4);
diff --git a/drivers/tty/serial/ip22zilog.c b/drivers/tty/serial/ip22zilog.c
index 1efd4c3..99b7b86 100644
--- a/drivers/tty/serial/ip22zilog.c
+++ b/drivers/tty/serial/ip22zilog.c
@@ -603,6 +603,8 @@ static void ip22zilog_start_tx(struct uart_port *port)
 	} else {
 		struct circ_buf *xmit = &port->state->xmit;
 
+		if (uart_circ_empty(xmit))
+			return;
 		writeb(xmit->buf[xmit->tail], &channel->data);
 		ZSDELAY();
 		ZS_WSYNC(channel);
diff --git a/drivers/tty/serial/m32r_sio.c b/drivers/tty/serial/m32r_sio.c
index 68f2c53..5702828 100644
--- a/drivers/tty/serial/m32r_sio.c
+++ b/drivers/tty/serial/m32r_sio.c
@@ -266,9 +266,11 @@ static void m32r_sio_start_tx(struct uart_port *port)
 	if (!(up->ier & UART_IER_THRI)) {
 		up->ier |= UART_IER_THRI;
 		serial_out(up, UART_IER, up->ier);
-		serial_out(up, UART_TX, xmit->buf[xmit->tail]);
-		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
-		up->port.icount.tx++;
+		if (!uart_circ_empty(xmit)) {
+			serial_out(up, UART_TX, xmit->buf[xmit->tail]);
+			xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+			up->port.icount.tx++;
+		}
 	}
 	while((serial_in(up, UART_LSR) & UART_EMPTY) != UART_EMPTY);
 #else
diff --git a/drivers/tty/serial/pmac_zilog.c b/drivers/tty/serial/pmac_zilog.c
index 8193635..f7ad5b9 100644
--- a/drivers/tty/serial/pmac_zilog.c
+++ b/drivers/tty/serial/pmac_zilog.c
@@ -653,6 +653,8 @@ static void pmz_start_tx(struct uart_port *port)
 	} else {
 		struct circ_buf *xmit = &port->state->xmit;
 
+		if (uart_circ_empty(xmit))
+			goto out;
 		write_zsdata(uap, xmit->buf[xmit->tail]);
 		zssync(uap);
 		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
@@ -661,6 +663,7 @@ static void pmz_start_tx(struct uart_port *port)
 		if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
 			uart_write_wakeup(&uap->port);
 	}
+ out:
 	pmz_debug("pmz: start_tx() done.\n");
 }
 
diff --git a/drivers/tty/serial/sunsab.c b/drivers/tty/serial/sunsab.c
index 80a58ec..2f57df9 100644
--- a/drivers/tty/serial/sunsab.c
+++ b/drivers/tty/serial/sunsab.c
@@ -427,6 +427,9 @@ static void sunsab_start_tx(struct uart_port *port)
 	struct circ_buf *xmit = &up->port.state->xmit;
 	int i;
 
+	if (uart_circ_empty(xmit))
+		return;
+
 	up->interrupt_mask1 &= ~(SAB82532_IMR1_ALLS|SAB82532_IMR1_XPR);
 	writeb(up->interrupt_mask1, &up->regs->w.imr1);
 	
diff --git a/drivers/tty/serial/sunzilog.c b/drivers/tty/serial/sunzilog.c
index a85db8b..02df394 100644
--- a/drivers/tty/serial/sunzilog.c
+++ b/drivers/tty/serial/sunzilog.c
@@ -703,6 +703,8 @@ static void sunzilog_start_tx(struct uart_port *port)
 	} else {
 		struct circ_buf *xmit = &port->state->xmit;
 
+		if (uart_circ_empty(xmit))
+			return;
 		writeb(xmit->buf[xmit->tail], &channel->data);
 		ZSDELAY();
 		ZS_WSYNC(channel);
-- 
2.0.0


  reply	other threads:[~2014-07-06 15:30 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20140609205917.GA913@drone.musicnaut.iki.fi>
2014-07-06 15:29 ` [PATCH 0/2] fixes for empty tx buffer breakage Peter Hurley
2014-07-06 15:29   ` Peter Hurley [this message]
2014-07-06 15:29   ` [PATCH 2/2] serial: arc_uart: Use uart_circ_empty() for open-coded comparison Peter Hurley
2014-07-10 23:14   ` [PATCH 0/2] fixes for empty tx buffer breakage Greg Kroah-Hartman
2014-07-10 23:12     ` David Miller
2014-07-10 23:29       ` Greg KH

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1404660593-12172-2-git-send-email-peter@hurleysoftware.com \
    --to=peter@hurleysoftware.com \
    --cc=davem@davemloft.net \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-serial@vger.kernel.org \
    --cc=sam@ravnborg.org \
    --cc=sethb@digi.com \
    --cc=tsbogend@alpha.franken.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).