[PATCHv4] parport: Add support for the WCH382 2S/1P multi-IO card

[PATCHv4] parport: Add support for the WCH382 2S/1P multi-IO card

[Sergej Pupykin]

Hello,

Sorry for previous broken patch: it was email autoformatting. Now I am using "git send-email".

[PATCHv4] parport: Add support for the WCH382 2S/1P multi-IO card

[Sergej Pupykin]

Hello,

Sorry for previous broken patch: it was email autoformatting. Now I am using "git send-email".

[PATCHv5] parport: Add support for the WCH382 2S/1P multi-IO card

[Sergej Pupykin]

Hello,

This patch is the same as v4 but I've added Signed-off-by line.

[PATCH] parport: Add support for the WCH382 2S/1P multi-IO card

[Sergej Pupykin]

WCH382 is a PCI-E card with 1 LPT and 2 DB9 COM ports detected as
Serial controller: Device 1c00:3250 (rev 10) (prog-if 05 [16850])

Signed-off-by: Sergej Pupykin <ml@sergej.pp.ru>
---
 drivers/parport/parport_serial.c   | 10 ++++++++++
 drivers/tty/serial/8250/8250_pci.c | 21 +++++++++++++++++++++
 2 files changed, 31 insertions(+)

diff --git a/drivers/parport/parport_serial.c b/drivers/parport/parport_serial.c
index ee93200..e15b484 100644
--- a/drivers/parport/parport_serial.c
+++ b/drivers/parport/parport_serial.c
@@ -64,6 +64,7 @@ enum parport_pc_pci_cards {
 	timedia_9079c,
 	wch_ch353_1s1p,
 	wch_ch353_2s1p,
+	wch_ch382_2s1p,
 	sunix_2s1p,
 };
 
@@ -151,6 +152,7 @@ static struct parport_pc_pci cards[] = {
 	/* timedia_9079c */             { 1, { { 2, 3 }, } },
 	/* wch_ch353_1s1p*/             { 1, { { 1, -1}, } },
 	/* wch_ch353_2s1p*/             { 1, { { 2, -1}, } },
+	/* wch_ch382_2s1p*/             { 1, { { 2, -1}, } },
 	/* sunix_2s1p */                { 1, { { 3, -1 }, } },
 };
 
@@ -257,6 +259,7 @@ static struct pci_device_id parport_serial_pci_tbl[] = {
 	/* WCH CARDS */
 	{ 0x4348, 0x5053, PCI_ANY_ID, PCI_ANY_ID, 0, 0, wch_ch353_1s1p},
 	{ 0x4348, 0x7053, 0x4348, 0x3253, 0, 0, wch_ch353_2s1p},
+	{ 0x1c00, 0x3250, 0x1c00, 0x3250, 0, 0, wch_ch382_2s1p},
 
 	/*
 	 * More SUNIX variations. At least one of these has part number
@@ -494,6 +497,13 @@ static struct pciserial_board pci_parport_serial_boards[] = {
 		.base_baud      = 115200,
 		.uart_offset    = 8,
 	},
+	[wch_ch382_2s1p] = {
+		.flags          = FL_BASE0,
+		.num_ports      = 2,
+		.base_baud      = 115200,
+		.uart_offset    = 8,
+		.first_offset   = 0xC0,
+	},
 	[sunix_2s1p] = {
 		.flags		= FL_BASE0|FL_BASE_BARS,
 		.num_ports	= 2,
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index beb9d71..ed5cb67 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1760,6 +1760,16 @@ pci_wch_ch353_setup(struct serial_private *priv,
 	return pci_default_setup(priv, board, port, idx);
 }
 
+static int
+pci_wch_ch382_setup(struct serial_private *priv,
+                    const struct pciserial_board *board,
+                    struct uart_8250_port *port, int idx)
+{
+	port->port.flags |= UPF_FIXED_TYPE;
+	port->port.type = PORT_16850;
+	return pci_default_setup(priv, board, port, idx);
+}
+
 #define PCI_VENDOR_ID_SBSMODULARIO	0x124B
 #define PCI_SUBVENDOR_ID_SBSMODULARIO	0x124B
 #define PCI_DEVICE_ID_OCTPRO		0x0001
@@ -1814,6 +1824,8 @@ pci_wch_ch353_setup(struct serial_private *priv,
 #define PCI_VENDOR_ID_SUNIX		0x1fd4
 #define PCI_DEVICE_ID_SUNIX_1999	0x1999
 
+#define PCIE_VENDOR_ID_WCH		0x1c00
+#define PCIE_DEVICE_ID_WCH_CH382_2S1P	0x3250
 
 /* Unknown vendors/cards - this should not be in linux/pci_ids.h */
 #define PCI_SUBDEVICE_ID_UNKNOWN_0x1584	0x1584
@@ -2494,6 +2506,14 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
 		.subdevice	= PCI_ANY_ID,
 		.setup		= pci_wch_ch353_setup,
 	},
+	/* WCH CH382 2S1P card (16750 clone) */
+	{
+		.vendor         = PCIE_VENDOR_ID_WCH,
+		.device         = PCIE_DEVICE_ID_WCH_CH382_2S1P,
+		.subvendor      = PCI_ANY_ID,
+		.subdevice      = PCI_ANY_ID,
+		.setup          = pci_wch_ch382_setup,
+	},
 	/*
 	 * ASIX devices with FIFO bug
 	 */
@@ -3586,6 +3606,7 @@ static const struct pci_device_id blacklist[] = {
 	/* multi-io cards handled by parport_serial */
 	{ PCI_DEVICE(0x4348, 0x7053), }, /* WCH CH353 2S1P */
 	{ PCI_DEVICE(0x4348, 0x5053), }, /* WCH CH353 1S1P */
+	{ PCI_DEVICE(0x1c00, 0x3250), }, /* WCH CH382 2S1P */
 };
 
 /*
-- 
2.1.3