[PATCH] serial: Fix divide-by-zero fault in uart_get_divisor()

[Peter Hurley <peter@hurleysoftware.com>]

uart_get_baud_rate() will return baud == 0 if the max rate is set
to the "magic" 38400 rate and the SPD_* flags are also specified.
On the first iteration, if the current baud rate is higher than the
max, the baud rate is clamped at the max (which in the degenerate
case is 38400). On the second iteration, the now-"magic" 38400 baud
rate selects the possibly higher alternate baud rate indicated by
the SPD_* flag. Since only two loop iterations are performed, the
loop is exited, a kernel WARNING is generated and a baud rate of
0 is returned.

Reproducible with:
 setserial /dev/ttyS0 spd_hi base_baud 38400

Only perform the "magic" 38400 -> SPD_* baud transform on the first
loop iteration, which prevents the degenerate case from recognizing
the clamped baud rate as the "magic" 38400 value.

Reported-by: Robert Święcki <robert@swiecki.net>
Cc: <stable@vger.kernel.org> # all
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
 drivers/tty/serial/serial_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index de74621..c4cc2f2 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -363,7 +363,7 @@ uart_get_baud_rate(struct uart_port *port, struct ktermios *termios,
 		 * The spd_hi, spd_vhi, spd_shi, spd_warp kludge...
 		 * Die! Die! Die!
 		 */
-		if (baud == 38400)
+		if (try == 0 && baud == 38400)
 			baud = altbaud;
 
 		/*
-- 
2.1.1

--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html