[PATCH v2] serial: mxs-auart: Fix mxs_auart_set_ldisc()

[Fabio Estevam <festevam@gmail.com>]

From: Fabio Estevam <fabio.estevam@freescale.com>

Commit 732a84a037a4 ("serial: core: Pass termios to set_ldisc() notifications")
changed the set_ldisc prototype.

At the time of this commit the mxs_auart driver did not implement set_ldisc,
so that's why it has not been converted.

Adapt also mxs_auart_set_ldisc() so that the following build warning can be
fixed:

drivers/tty/serial/mxs-auart.c:962:2: warning: initialization from
incompatible pointer type
  .set_ldisc      = mxs_auart_set_ldisc,
  ^
drivers/tty/serial/mxs-auart.c:962:2: warning: (near initialization
for 'mxs_auart_ops.set_ldisc')

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
Changes since v1:
- Fix the explanation for the error

Janusz,

This is build-tested only. Please test it on real hardware, if possible.

 drivers/tty/serial/mxs-auart.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c
index 3784920..a6d2bb9f4 100644
--- a/drivers/tty/serial/mxs-auart.c
+++ b/drivers/tty/serial/mxs-auart.c
@@ -784,9 +784,10 @@ static void mxs_auart_settermios(struct uart_port *u,
 		mxs_auart_disable_ms(u);
 }
 
-static void mxs_auart_set_ldisc(struct uart_port *port, int new)
+static void mxs_auart_set_ldisc(struct uart_port *port,
+				struct ktermios *termios)
 {
-	if (new == N_PPS) {
+	if (termios->c_line == N_PPS) {
 		port->flags |= UPF_HARDPPS_CD;
 		mxs_auart_enable_ms(port);
 	} else {
-- 
1.9.1