From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefan Agner Subject: [PATCH 1/4] serial: fsl_lpuart: delete timer on shutdown Date: Fri, 28 Nov 2014 01:23:22 +0100 Message-ID: <1417134205-4400-2-git-send-email-stefan@agner.ch> References: <1417134205-4400-1-git-send-email-stefan@agner.ch> Return-path: In-Reply-To: <1417134205-4400-1-git-send-email-stefan@agner.ch> Sender: linux-kernel-owner@vger.kernel.org To: gregkh@linuxfoundation.org Cc: jslaby@suse.cz, jingchang.lu@freescale.com, shawn.guo@linaro.org, linux-serial@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, stefan@agner.ch List-Id: linux-serial@vger.kernel.org If the serial port gets closed while a RX transfer is in progress, the timer might fire after the serial port shutdown finished. Setup the timer on UART startup which allows to delete the timer unconditionally on shutdown. This also saves the initialization on each transfer too. Signed-off-by: Stefan Agner --- drivers/tty/serial/fsl_lpuart.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c index 6dd53af..b1905a9 100644 --- a/drivers/tty/serial/fsl_lpuart.c +++ b/drivers/tty/serial/fsl_lpuart.c @@ -506,9 +506,6 @@ static inline void lpuart_prepare_rx(struct lpuart_port *sport) spin_lock_irqsave(&sport->port.lock, flags); - init_timer(&sport->lpuart_timer); - sport->lpuart_timer.function = lpuart_timer_func; - sport->lpuart_timer.data = (unsigned long)sport; sport->lpuart_timer.expires = jiffies + sport->dma_rx_timeout; add_timer(&sport->lpuart_timer); @@ -1106,6 +1103,8 @@ static int lpuart_startup(struct uart_port *port) sport->lpuart_dma_use = false; } else { sport->lpuart_dma_use = true; + setup_timer(&sport->lpuart_timer, lpuart_timer_func, + (unsigned long)sport); temp = readb(port->membase + UARTCR5); writeb(temp | UARTCR5_TDMAS, port->membase + UARTCR5); } @@ -1180,6 +1179,8 @@ static void lpuart_shutdown(struct uart_port *port) devm_free_irq(port->dev, port->irq, sport); if (sport->lpuart_dma_use) { + del_timer_sync(&sport->lpuart_timer); + lpuart_dma_tx_free(port); lpuart_dma_rx_free(port); } -- 2.1.3