linux-serial.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jon Hunter <jonathanh-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
To: Laxman Dewangan
	<ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>,
	Greg Kroah-Hartman
	<gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org>,
	Jiri Slaby <jslaby-AlSwsSmVLrQ@public.gmane.org>
Cc: linux-serial-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	Jon Hunter <jonathanh-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
Subject: [PATCH 0/8] serial: tegra: various fixes
Date: Tue, 5 May 2015 15:17:51 +0100	[thread overview]
Message-ID: <1430835479-6613-1-git-send-email-jonathanh@nvidia.com> (raw)

Various fixes for the tegra hsuart driver.

Tested on tegra124 nyan-big by opening a serial console on ttyTHS0
and performing simple z-modem transfers.

Jon Hunter (6):
  serial: tegra: Correct delay after TX flush
  serial: tegra: Add delay after enabling FIFO mode
  serial: tegra: Use unsigned types for RX and TX byte counts
  serial: tegra: Fix cookie used by TX channel
  serial: tegra: Correct shutdown of UARTs
  serial: tegra: Correct error handling on DMA setup

Shardar Shariff Md (2):
  serial: tegra: check the count and read if any from dma
  serial: tegra: handle race condition on uart rx side

 drivers/tty/serial/serial-tegra.c | 128 ++++++++++++++++++++++++++------------
 1 file changed, 87 insertions(+), 41 deletions(-)

-- 
1.9.1

             reply	other threads:[~2015-05-05 14:17 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-05-05 14:17 Jon Hunter [this message]
     [not found] ` <1430835479-6613-1-git-send-email-jonathanh-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2015-05-05 14:17   ` [PATCH 1/8] serial: tegra: Correct delay after TX flush Jon Hunter
2015-05-05 14:17   ` [PATCH 2/8] serial: tegra: Add delay after enabling FIFO mode Jon Hunter
2015-05-05 14:17   ` [PATCH 3/8] serial: tegra: check the count and read if any from dma Jon Hunter
2015-05-05 14:17   ` [PATCH 4/8] serial: tegra: handle race condition on uart rx side Jon Hunter
2015-05-05 14:17   ` [PATCH 5/8] serial: tegra: Use unsigned types for RX and TX byte counts Jon Hunter
2015-05-05 14:17   ` [PATCH 6/8] serial: tegra: Fix cookie used by TX channel Jon Hunter
2015-05-05 14:17   ` [PATCH 7/8] serial: tegra: Correct shutdown of UARTs Jon Hunter
2015-05-05 14:17   ` [PATCH 8/8] serial: tegra: Correct error handling on DMA setup Jon Hunter
2015-05-12  8:39     ` Alexandre Courbot
     [not found]       ` <CAAVeFuL=z-xbGT1e_L6+_GQ8aZ0BvNBfmoi65u_7qVHv=tpTbA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-05-12  9:51         ` Jon Hunter
2015-05-13  4:56           ` Alexandre Courbot
2015-05-13  8:23             ` Jon Hunter
2015-05-20  3:57               ` Alexandre Courbot
     [not found]                 ` <CAAVeFuL8XoQUykpVbzgJiYNkoXA0e7c1k95nvB6Q+wZUHjOjSw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-05-20  9:51                   ` Jon Hunter
2015-05-20 12:12                     ` Jon Hunter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1430835479-6613-1-git-send-email-jonathanh@nvidia.com \
    --to=jonathanh-ddmlm1+adcrqt0dzr+alfa@public.gmane.org \
    --cc=gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org \
    --cc=jslaby-AlSwsSmVLrQ@public.gmane.org \
    --cc=ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-serial-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).