linux-serial.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jon Hunter <jonathanh-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
To: Laxman Dewangan
	<ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>,
	Greg Kroah-Hartman
	<gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org>,
	Jiri Slaby <jslaby-AlSwsSmVLrQ@public.gmane.org>
Cc: linux-serial-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	Jon Hunter <jonathanh-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
Subject: [PATCH 8/8] serial: tegra: Correct error handling on DMA setup
Date: Tue, 5 May 2015 15:17:59 +0100	[thread overview]
Message-ID: <1430835479-6613-9-git-send-email-jonathanh@nvidia.com> (raw)
In-Reply-To: <1430835479-6613-1-git-send-email-jonathanh-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>

Function tegra_uart_dma_channel_allocate() does not check that
dma_map_single() mapped the DMA buffer correctly. Add a check for this
and appropriate error handling.

Furthermore, if dmaengine_slave_config() (called by
tegra_uart_dma_channel_allocate()) fails, then memory allocated/mapped
is not freed/unmapped. Therefore, call tegra_uart_dma_channel_free()
instead of just dma_release_channel() if  dmaengine_slave_config() fails.

Signed-off-by: Jon Hunter <jonathanh-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
---
 drivers/tty/serial/serial-tegra.c | 51 +++++++++++++++++++++------------------
 1 file changed, 28 insertions(+), 23 deletions(-)

diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c
index 96378da9aefc..3b63f103f0c9 100644
--- a/drivers/tty/serial/serial-tegra.c
+++ b/drivers/tty/serial/serial-tegra.c
@@ -949,6 +949,28 @@ static int tegra_uart_hw_init(struct tegra_uart_port *tup)
 	return 0;
 }
 
+static void tegra_uart_dma_channel_free(struct tegra_uart_port *tup,
+		bool dma_to_memory)
+{
+	if (dma_to_memory) {
+		dmaengine_terminate_all(tup->rx_dma_chan);
+		dma_release_channel(tup->rx_dma_chan);
+		dma_free_coherent(tup->uport.dev, TEGRA_UART_RX_DMA_BUFFER_SIZE,
+				tup->rx_dma_buf_virt, tup->rx_dma_buf_phys);
+		tup->rx_dma_chan = NULL;
+		tup->rx_dma_buf_phys = 0;
+		tup->rx_dma_buf_virt = NULL;
+	} else {
+		dmaengine_terminate_all(tup->tx_dma_chan);
+		dma_release_channel(tup->tx_dma_chan);
+		dma_unmap_single(tup->uport.dev, tup->tx_dma_buf_phys,
+			UART_XMIT_SIZE, DMA_TO_DEVICE);
+		tup->tx_dma_chan = NULL;
+		tup->tx_dma_buf_phys = 0;
+		tup->tx_dma_buf_virt = NULL;
+	}
+}
+
 static int tegra_uart_dma_channel_allocate(struct tegra_uart_port *tup,
 			bool dma_to_memory)
 {
@@ -981,6 +1003,11 @@ static int tegra_uart_dma_channel_allocate(struct tegra_uart_port *tup,
 		dma_phys = dma_map_single(tup->uport.dev,
 			tup->uport.state->xmit.buf, UART_XMIT_SIZE,
 			DMA_TO_DEVICE);
+		if (dma_mapping_error(tup->uport.dev, dma_phys)) {
+			dev_err(tup->uport.dev, "dma_map_single tx failed\n");
+			dma_release_channel(dma_chan);
+			return -ENOMEM;
+		}
 		dma_buf = tup->uport.state->xmit.buf;
 	}
 
@@ -1013,32 +1040,10 @@ static int tegra_uart_dma_channel_allocate(struct tegra_uart_port *tup,
 	return 0;
 
 scrub:
-	dma_release_channel(dma_chan);
+	tegra_uart_dma_channel_free(tup, dma_to_memory);
 	return ret;
 }
 
-static void tegra_uart_dma_channel_free(struct tegra_uart_port *tup,
-		bool dma_to_memory)
-{
-	if (dma_to_memory) {
-		dmaengine_terminate_all(tup->rx_dma_chan);
-		dma_release_channel(tup->rx_dma_chan);
-		dma_free_coherent(tup->uport.dev, TEGRA_UART_RX_DMA_BUFFER_SIZE,
-				tup->rx_dma_buf_virt, tup->rx_dma_buf_phys);
-		tup->rx_dma_chan = NULL;
-		tup->rx_dma_buf_phys = 0;
-		tup->rx_dma_buf_virt = NULL;
-	} else {
-		dmaengine_terminate_all(tup->tx_dma_chan);
-		dma_release_channel(tup->tx_dma_chan);
-		dma_unmap_single(tup->uport.dev, tup->tx_dma_buf_phys,
-			UART_XMIT_SIZE, DMA_TO_DEVICE);
-		tup->tx_dma_chan = NULL;
-		tup->tx_dma_buf_phys = 0;
-		tup->tx_dma_buf_virt = NULL;
-	}
-}
-
 static int tegra_uart_startup(struct uart_port *u)
 {
 	struct tegra_uart_port *tup = to_tegra_uport(u);
-- 
1.9.1

  parent reply	other threads:[~2015-05-05 14:17 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-05-05 14:17 [PATCH 0/8] serial: tegra: various fixes Jon Hunter
     [not found] ` <1430835479-6613-1-git-send-email-jonathanh-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2015-05-05 14:17   ` [PATCH 1/8] serial: tegra: Correct delay after TX flush Jon Hunter
2015-05-05 14:17   ` [PATCH 2/8] serial: tegra: Add delay after enabling FIFO mode Jon Hunter
2015-05-05 14:17   ` [PATCH 3/8] serial: tegra: check the count and read if any from dma Jon Hunter
2015-05-05 14:17   ` [PATCH 4/8] serial: tegra: handle race condition on uart rx side Jon Hunter
2015-05-05 14:17   ` [PATCH 5/8] serial: tegra: Use unsigned types for RX and TX byte counts Jon Hunter
2015-05-05 14:17   ` [PATCH 6/8] serial: tegra: Fix cookie used by TX channel Jon Hunter
2015-05-05 14:17   ` [PATCH 7/8] serial: tegra: Correct shutdown of UARTs Jon Hunter
2015-05-05 14:17   ` Jon Hunter [this message]
2015-05-12  8:39     ` [PATCH 8/8] serial: tegra: Correct error handling on DMA setup Alexandre Courbot
     [not found]       ` <CAAVeFuL=z-xbGT1e_L6+_GQ8aZ0BvNBfmoi65u_7qVHv=tpTbA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-05-12  9:51         ` Jon Hunter
2015-05-13  4:56           ` Alexandre Courbot
2015-05-13  8:23             ` Jon Hunter
2015-05-20  3:57               ` Alexandre Courbot
     [not found]                 ` <CAAVeFuL8XoQUykpVbzgJiYNkoXA0e7c1k95nvB6Q+wZUHjOjSw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-05-20  9:51                   ` Jon Hunter
2015-05-20 12:12                     ` Jon Hunter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1430835479-6613-9-git-send-email-jonathanh@nvidia.com \
    --to=jonathanh-ddmlm1+adcrqt0dzr+alfa@public.gmane.org \
    --cc=gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org \
    --cc=jslaby-AlSwsSmVLrQ@public.gmane.org \
    --cc=ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-serial-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).