From: Eduardo Valentin <edubezval@gmail.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Jiri Slaby <jslaby@suse.com>, Fabio Estevam <festevam@gmail.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>,
Linux PM <linux-pm@vger.kernel.org>,
linux-serial@vger.kernel.org, LKML <linux-kernel@vger.kernel.org>,
Eduardo Valentin <edubezval@gmail.com>
Subject: [PATCHv3 4/8] serial: imx: save and restore context in the suspend path
Date: Tue, 11 Aug 2015 10:21:23 -0700 [thread overview]
Message-ID: <1439313687-28502-5-git-send-email-edubezval@gmail.com> (raw)
In-Reply-To: <1439313687-28502-1-git-send-email-edubezval@gmail.com>
This change teaches the imx serial driver to save its
context and restore it across suspend and resume path.
To do so, it introduces serial_imx_restore_context()
and serial_imx_save_context() functions. They use
a shadow set of registers to save key registers
and restore them accordingly. These functions can
be reused on other situations, when the device
context is lost.
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: linux-serial@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
---
drivers/tty/serial/imx.c | 58 ++++++++++++++++++++++++++++++------------------
1 file changed, 37 insertions(+), 21 deletions(-)
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 167dea1..fe3d41c 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -217,6 +217,7 @@ struct imx_port {
unsigned int dma_tx_nents;
wait_queue_head_t dma_wait;
unsigned int saved_reg[10];
+ bool context_saved;
};
struct imx_port_ucrs {
@@ -1972,6 +1973,40 @@ static int serial_imx_remove(struct platform_device *pdev)
return uart_remove_one_port(&imx_reg, &sport->port);
}
+static void serial_imx_restore_context(struct imx_port *sport)
+{
+ if (!sport->context_saved)
+ return;
+
+ writel(sport->saved_reg[4], sport->port.membase + UFCR);
+ writel(sport->saved_reg[5], sport->port.membase + UESC);
+ writel(sport->saved_reg[6], sport->port.membase + UTIM);
+ writel(sport->saved_reg[7], sport->port.membase + UBIR);
+ writel(sport->saved_reg[8], sport->port.membase + UBMR);
+ writel(sport->saved_reg[9], sport->port.membase + IMX21_UTS);
+ writel(sport->saved_reg[0], sport->port.membase + UCR1);
+ writel(sport->saved_reg[1] | UCR2_SRST, sport->port.membase + UCR2);
+ writel(sport->saved_reg[2], sport->port.membase + UCR3);
+ writel(sport->saved_reg[3], sport->port.membase + UCR4);
+ sport->context_saved = false;
+}
+
+static void serial_imx_save_context(struct imx_port *sport)
+{
+ /* Save necessary regs */
+ sport->saved_reg[0] = readl(sport->port.membase + UCR1);
+ sport->saved_reg[1] = readl(sport->port.membase + UCR2);
+ sport->saved_reg[2] = readl(sport->port.membase + UCR3);
+ sport->saved_reg[3] = readl(sport->port.membase + UCR4);
+ sport->saved_reg[4] = readl(sport->port.membase + UFCR);
+ sport->saved_reg[5] = readl(sport->port.membase + UESC);
+ sport->saved_reg[6] = readl(sport->port.membase + UTIM);
+ sport->saved_reg[7] = readl(sport->port.membase + UBIR);
+ sport->saved_reg[8] = readl(sport->port.membase + UBMR);
+ sport->saved_reg[9] = readl(sport->port.membase + IMX21_UTS);
+ sport->context_saved = true;
+}
+
static void serial_imx_enable_wakeup(struct imx_port *sport, bool on)
{
unsigned int val;
@@ -2001,17 +2036,7 @@ static int imx_serial_port_suspend_noirq(struct device *dev)
if (ret)
return ret;
- /* Save necessary regs */
- sport->saved_reg[0] = readl(sport->port.membase + UCR1);
- sport->saved_reg[1] = readl(sport->port.membase + UCR2);
- sport->saved_reg[2] = readl(sport->port.membase + UCR3);
- sport->saved_reg[3] = readl(sport->port.membase + UCR4);
- sport->saved_reg[4] = readl(sport->port.membase + UFCR);
- sport->saved_reg[5] = readl(sport->port.membase + UESC);
- sport->saved_reg[6] = readl(sport->port.membase + UTIM);
- sport->saved_reg[7] = readl(sport->port.membase + UBIR);
- sport->saved_reg[8] = readl(sport->port.membase + UBMR);
- sport->saved_reg[9] = readl(sport->port.membase + IMX21_UTS);
+ serial_imx_save_context(sport);
clk_disable(sport->clk_ipg);
@@ -2028,16 +2053,7 @@ static int imx_serial_port_resume_noirq(struct device *dev)
if (ret)
return ret;
- writel(sport->saved_reg[4], sport->port.membase + UFCR);
- writel(sport->saved_reg[5], sport->port.membase + UESC);
- writel(sport->saved_reg[6], sport->port.membase + UTIM);
- writel(sport->saved_reg[7], sport->port.membase + UBIR);
- writel(sport->saved_reg[8], sport->port.membase + UBMR);
- writel(sport->saved_reg[9], sport->port.membase + IMX21_UTS);
- writel(sport->saved_reg[0], sport->port.membase + UCR1);
- writel(sport->saved_reg[1] | UCR2_SRST, sport->port.membase + UCR2);
- writel(sport->saved_reg[2], sport->port.membase + UCR3);
- writel(sport->saved_reg[3], sport->port.membase + UCR4);
+ serial_imx_restore_context(sport);
clk_disable(sport->clk_ipg);
--
2.5.0
next prev parent reply other threads:[~2015-08-11 17:21 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-11 17:21 [PATCHv3 0/8] serial: imx: rework pm support and add runtime pm Eduardo Valentin
2015-08-11 17:21 ` [PATCHv3 1/8] serial: imx: remove unbalanced clk_prepare Eduardo Valentin
2015-08-11 17:21 ` [PATCHv3 2/8] serial: imx: introduce serial_imx_enable_wakeup() Eduardo Valentin
2015-08-11 17:21 ` [PATCHv3 3/8] serial: imx: allow waking up on RTSD Eduardo Valentin
2015-08-11 17:21 ` Eduardo Valentin [this message]
2015-08-11 17:21 ` [PATCHv3 5/8] serial: imx: add a flag to indicate we are in the suspend path Eduardo Valentin
2015-08-11 17:21 ` [PATCHv3 6/8] serial: imx: add runtime pm support Eduardo Valentin
2015-08-15 0:23 ` Greg Kroah-Hartman
2015-08-15 1:20 ` Eduardo Valentin
2015-08-11 17:21 ` [PATCHv3 7/8] serial: imx: add pm_qos request Eduardo Valentin
2015-08-11 17:21 ` [PATCHv3 8/8] serial: imx: use SET_*SYSTEM_PM_OPS helper functions Eduardo Valentin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1439313687-28502-5-git-send-email-edubezval@gmail.com \
--to=edubezval@gmail.com \
--cc=festevam@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=jslaby@suse.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=s.hauer@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).