* [PATCH] serial: 8250: add uart_config entry for PORT_RT2880
@ 2015-10-02 16:50 Mans Rullgard
0 siblings, 0 replies; only message in thread
From: Mans Rullgard @ 2015-10-02 16:50 UTC (permalink / raw)
To: Greg Kroah-Hartman, Jiri Slaby, linux-serial, linux-kernel; +Cc: slash.tmp
This adds an entry to the uart_config table for PORT_RT2880
enabling rx/tx FIFOs. The UART is actually a Palmchip BK-3103
which is found in several devices from Alchemy/RMI, Ralink, and
Sigma Designs.
Signed-off-by: Mans Rullgard <mans@mansr.com>
---
drivers/tty/serial/8250/8250_port.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 8e351c4..8f53ed5 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -261,6 +261,14 @@ configured less than Maximum supported fifo bytes */
UART_FCR7_64BYTE,
.flags = UART_CAP_FIFO,
},
+ [PORT_RT2880] = {
+ .name = "Palmchip BK-3103",
+ .fifo_size = 16,
+ .tx_loadsz = 16,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+ .rxtrig_bytes = {1, 4, 8, 14},
+ .flags = UART_CAP_FIFO,
+ },
};
/* Uart divisor latch read */
--
2.5.3
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2015-10-02 16:50 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-10-02 16:50 [PATCH] serial: 8250: add uart_config entry for PORT_RT2880 Mans Rullgard
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).