linux-serial.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Timur Tabi <timur@codeaurora.org>
To: linux-serial@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, Andrew.Jackson@arm.com,
	andre.przywara@arm.com, jun.nie@linaro.org,
	peter@hurleysoftware.com,
	Linus Walleij <linus.walleij@linaro.org>,
	Greg Kroah-Hartman <greg@kroah.com>,
	jslaby@suse.com
Subject: [PATCH 1/2] serial: amba-pl011: use cpu_relax when polling registers
Date: Tue,  3 Nov 2015 09:01:06 -0600	[thread overview]
Message-ID: <1446562867-5693-1-git-send-email-timur@codeaurora.org> (raw)

Busy loops that poll on a register should call cpu_relax().  On some
architectures, it can lower CPU power consumption or yield to a
hyperthreaded twin processor.  It also serves as a compiler barrier,
so it can replace barrier() calls.

Signed-off-by: Timur Tabi <timur@codeaurora.org>
---
 drivers/tty/serial/amba-pl011.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 005de8c..164bd65 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -1076,7 +1076,7 @@ static void pl011_dma_shutdown(struct uart_amba_port *uap)
 
 	/* Disable RX and TX DMA */
 	while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_BUSY)
-		barrier();
+		cpu_relax();
 
 	spin_lock_irq(&uap->port.lock);
 	uap->dmacr &= ~(UART011_DMAONERR | UART011_RXDMAE | UART011_TXDMAE);
@@ -1520,7 +1520,7 @@ static void pl011_put_poll_char(struct uart_port *port,
 	    container_of(port, struct uart_amba_port, port);
 
 	while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_TXFF)
-		barrier();
+		cpu_relax();
 
 	writew(ch, uap->port.membase + UART01x_DR);
 }
@@ -2053,7 +2053,7 @@ static void pl011_console_putchar(struct uart_port *port, int ch)
 	    container_of(port, struct uart_amba_port, port);
 
 	while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_TXFF)
-		barrier();
+		cpu_relax();
 	writew(ch, uap->port.membase + UART01x_DR);
 }
 
@@ -2093,6 +2093,7 @@ pl011_console_write(struct console *co, const char *s, unsigned int count)
 	 */
 	do {
 		status = readw(uap->port.membase + UART01x_FR);
+		cpu_relax();
 	} while (status & UART01x_FR_BUSY);
 	if (!uap->vendor->always_enabled)
 		writew(old_cr, uap->port.membase + UART011_CR);
@@ -2205,10 +2206,10 @@ static struct console amba_console = {
 static void pl011_putc(struct uart_port *port, int c)
 {
 	while (readl(port->membase + UART01x_FR) & UART01x_FR_TXFF)
-		barrier();
+		cpu_relax();
 	writel(c, port->membase + UART01x_DR);
 	while (!(readl(port->membase + UART01x_FR) & UART011_FR_TXFE))
-		barrier();
+		cpu_relax();
 }
 
 static void pl011_early_write(struct console *con, const char *s, unsigned n)
-- 
Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project.

             reply	other threads:[~2015-11-03 15:01 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-11-03 15:01 Timur Tabi [this message]
2015-11-03 15:01 ` [PATCH 2/2] serial: amba-pl011: abstract register accessors Timur Tabi
2015-11-03 16:12   ` Russell King - ARM Linux
2015-11-03 16:43     ` Timur Tabi
2015-11-06  1:19   ` Peter Hurley
2015-11-06  1:14 ` [PATCH 1/2] serial: amba-pl011: use cpu_relax when polling registers Peter Hurley
2015-12-13  6:04 ` Greg Kroah-Hartman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1446562867-5693-1-git-send-email-timur@codeaurora.org \
    --to=timur@codeaurora.org \
    --cc=Andrew.Jackson@arm.com \
    --cc=andre.przywara@arm.com \
    --cc=greg@kroah.com \
    --cc=jslaby@suse.com \
    --cc=jun.nie@linaro.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-serial@vger.kernel.org \
    --cc=peter@hurleysoftware.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).