From: Wang Hongcheng <annie.wang@amd.com>
To: Vinod Koul <vinod.koul@intel.com>,
Mika Westerberg <mika.westerberg@linux.intel.com>,
Joerg Roedel <joro@8bytes.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
"Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: linux-acpi@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-serial@vger.kernel.org, dmaengine@vger.kernel.org,
iommu@lists.linux-foundation.org, Borislav Petkov <bp@alien8.de>,
Huang Rui <ray.huang@amd.com>, Wan Zongshun <vincent.wan@amd.com>,
Ken Xue <ken.xue@amd.com>, Tony Li <tony.li@amd.com>,
Wang Hongcheng <annie.wang@amd.com>
Subject: [PATCH 4/9] dmaengine: pl330: add new items for pl330 private data
Date: Fri, 4 Dec 2015 11:24:21 +0800 [thread overview]
Message-ID: <1449199466-6081-5-git-send-email-annie.wang@amd.com> (raw)
In-Reply-To: <1449199466-6081-1-git-send-email-annie.wang@amd.com>
has_no_cap_mask means this device has no preset cap mask.
mcbuf_sz means bytes to allocate for MC buffer.
flags is for irq sharing, default is non-shared, in AMD
Carrizo, pl330 shares IRQ with its corresponding UART device.
Signed-off-by: Wang Hongcheng <annie.wang@amd.com>
---
drivers/acpi/acpi_apd.c | 13 ++++++++++++-
drivers/dma/pl330.c | 19 +++++++++++++------
include/linux/amba/pl330.h | 3 +++
3 files changed, 28 insertions(+), 7 deletions(-)
diff --git a/drivers/acpi/acpi_apd.c b/drivers/acpi/acpi_apd.c
index eb3316a..7a582f5 100644
--- a/drivers/acpi/acpi_apd.c
+++ b/drivers/acpi/acpi_apd.c
@@ -21,6 +21,7 @@
#include <linux/amba/bus.h>
#include <linux/kernel.h>
#include <linux/sizes.h>
+#include <linux/amba/pl330.h>
#include <linux/interrupt.h>
#include "internal.h"
@@ -35,6 +36,16 @@ struct apd_private_data;
#define ACPI_APD_SYSFS BIT(0)
#define ACPI_APD_PM BIT(1)
+static u8 peri_id[2] = { 0, 1 };
+
+static struct dma_pl330_platdata amd_pl330 = {
+ .nr_valid_peri = 2,
+ .peri_id = peri_id,
+ .has_no_cap_mask = true,
+ .mcbuf_sz = 0,
+ .flags = IRQF_SHARED,
+};
+
/**
* struct apd_device_desc - a descriptor for apd device.
* @flags: device flags like %ACPI_APD_SYSFS, %ACPI_APD_PM;
@@ -146,7 +157,7 @@ static int acpi_apd_create_device(struct acpi_device *adev,
amba_dev = acpi_create_amba_device(pdata->adev, 0x00041330,
48000000,
- NULL,
+ &amd_pl330,
&amba_quirks);
if (IS_ERR_OR_NULL(amba_dev))
goto err_out;
diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c
index 17ee758..8300969 100644
--- a/drivers/dma/pl330.c
+++ b/drivers/dma/pl330.c
@@ -26,6 +26,8 @@
#include <linux/scatterlist.h>
#include <linux/of.h>
#include <linux/of_dma.h>
+#include <linux/acpi.h>
+#include <linux/acpi_dma.h>
#include <linux/err.h>
#include <linux/pm_runtime.h>
@@ -488,6 +490,9 @@ struct pl330_dmac {
/* Peripheral channels connected to this DMAC */
unsigned int num_peripherals;
struct dma_pl330_chan *peripherals; /* keep at end */
+
+ /*IRQ register flags */
+ unsigned int flags;
};
struct dma_pl330_desc {
@@ -2800,6 +2805,8 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id)
pl330->mcbufsz = pdat ? pdat->mcbuf_sz : 0;
+ pl330->flags = pdat ? pdat->flags : IRQF_TRIGGER_NONE;
+
res = &adev->res;
pl330->base = devm_ioremap_resource(&adev->dev, res);
if (IS_ERR(pl330->base))
@@ -2811,7 +2818,7 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id)
irq = adev->irq[i];
if (irq) {
ret = devm_request_irq(&adev->dev, irq,
- pl330_irq_handler, 0,
+ pl330_irq_handler, pl330->flags,
dev_name(&adev->dev), pl330);
if (ret)
return ret;
@@ -2870,7 +2877,7 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id)
list_add_tail(&pch->chan.device_node, &pd->channels);
}
- if (pdat) {
+ if (pdat && !pdat->has_no_cap_mask) {
pd->cap_mask = pdat->cap_mask;
} else {
dma_cap_set(DMA_MEMCPY, pd->cap_mask);
@@ -2923,11 +2930,11 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id)
dev_info(&adev->dev,
- "Loaded driver for PL330 DMAC-%x\n", adev->periphid);
+ "Loaded driver for PL330 DMAC-%x\n", adev->periphid);
dev_info(&adev->dev,
- "\tDBUFF-%ux%ubytes Num_Chans-%u Num_Peri-%u Num_Events-%u\n",
- pcfg->data_buf_dep, pcfg->data_bus_width / 8, pcfg->num_chan,
- pcfg->num_peri, pcfg->num_events);
+ "\tDBUFF-%ux%ubytes Num_Chans-%u Num_Peri-%u Num_Events-%u\n",
+ pcfg->data_buf_dep, pcfg->data_bus_width / 8, pcfg->num_chan,
+ pcfg->num_peri, pcfg->num_events);
pm_runtime_irq_safe(&adev->dev);
pm_runtime_use_autosuspend(&adev->dev);
diff --git a/include/linux/amba/pl330.h b/include/linux/amba/pl330.h
index fe93758..605d00f 100644
--- a/include/linux/amba/pl330.h
+++ b/include/linux/amba/pl330.h
@@ -26,9 +26,12 @@ struct dma_pl330_platdata {
/* Array of valid peripherals */
u8 *peri_id;
/* Operational capabilities */
+ bool has_no_cap_mask;
dma_cap_mask_t cap_mask;
/* Bytes to allocate for MC buffer */
unsigned mcbuf_sz;
+ /*flags for irq sharing, default is non-shared*/
+ unsigned flags;
};
extern bool pl330_filter(struct dma_chan *chan, void *param);
--
1.9.1
next prev parent reply other threads:[~2015-12-04 3:24 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-04 3:24 [PATCH 0/9] 8250: AMD Carrizo UART PL300 DMA enablement Wang Hongcheng
2015-12-04 3:24 ` [PATCH 1/9] ACPI: Add support for AMBA bus type Wang Hongcheng
2015-12-04 8:50 ` Mika Westerberg
2015-12-04 9:17 ` Huang Rui
2015-12-04 9:42 ` Hanjun Guo
2015-12-04 9:59 ` G Gregory
2015-12-04 10:20 ` Huang Rui
2015-12-04 10:23 ` G Gregory
2015-12-04 3:24 ` [PATCH 2/9] 8250/Kconfig: add config option CONFIG_SERIAL_8250_AMD Wang Hongcheng
2015-12-04 11:11 ` Borislav Petkov
2015-12-04 3:24 ` [PATCH 3/9] ACPI: add struct acpi_amba_quirk for AMD pl330 specific device config Wang Hongcheng
[not found] ` <1449199466-6081-4-git-send-email-annie.wang-5C7GfCeVMHo@public.gmane.org>
2015-12-04 12:56 ` kbuild test robot
2015-12-04 13:16 ` Graeme Gregory
2015-12-11 6:57 ` Wang, Annie
[not found] ` <BLUPR12MB04339648B98F07977B6FA61F81EA0-7LeqcoF/hwrdEWIfrEWxYwdYzm3356FpvxpqHgZTriW3zl9H0oFU5g@public.gmane.org>
2015-12-11 9:31 ` Vinod Koul
2015-12-04 3:24 ` Wang Hongcheng [this message]
2015-12-10 4:09 ` [PATCH 4/9] dmaengine: pl330: add new items for pl330 private data Vinod Koul
2015-12-10 6:38 ` Wang, Annie
[not found] ` <BLUPR12MB0433B81BB0AEB2D84505B55881E90-7LeqcoF/hwrdEWIfrEWxYwdYzm3356FpvxpqHgZTriW3zl9H0oFU5g@public.gmane.org>
2015-12-11 9:29 ` Vinod Koul
2015-12-11 13:56 ` Andy Shevchenko
2015-12-04 3:24 ` [PATCH 5/9] dmaengine: pl330: provide ACPI dmaengine interface Wang Hongcheng
[not found] ` <1449199466-6081-6-git-send-email-annie.wang-5C7GfCeVMHo@public.gmane.org>
2015-12-13 2:21 ` Andy Shevchenko
2015-12-04 3:24 ` [PATCH 6/9] dmaengine:pl330: set segment_boundary_mask = 0cffffffff Wang Hongcheng
2015-12-04 14:59 ` Robin Murphy
2015-12-04 3:24 ` [PATCH 7/9] Serial:8250: New Port Type PORT_AMD_8250 Wang Hongcheng
[not found] ` <1449199466-6081-8-git-send-email-annie.wang-5C7GfCeVMHo@public.gmane.org>
2015-12-13 2:30 ` Andy Shevchenko
2015-12-04 3:24 ` [PATCH 8/9] Documentation: Add ivrs_acpihid kernel parameter description Wang Hongcheng
[not found] ` <1449199466-6081-9-git-send-email-annie.wang-5C7GfCeVMHo@public.gmane.org>
2015-12-04 12:21 ` Borislav Petkov
2015-12-04 13:19 ` Wan, Vincent
2015-12-04 14:38 ` Borislav Petkov
2015-12-04 3:24 ` [PATCH 9/9] iommu/amd: Add ACPI HID named devices IOMMU driver support Wang Hongcheng
2015-12-13 2:32 ` [PATCH 0/9] 8250: AMD Carrizo UART PL300 DMA enablement Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1449199466-6081-5-git-send-email-annie.wang@amd.com \
--to=annie.wang@amd.com \
--cc=bp@alien8.de \
--cc=dmaengine@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=iommu@lists.linux-foundation.org \
--cc=joro@8bytes.org \
--cc=ken.xue@amd.com \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=mika.westerberg@linux.intel.com \
--cc=ray.huang@amd.com \
--cc=rjw@rjwysocki.net \
--cc=tony.li@amd.com \
--cc=vincent.wan@amd.com \
--cc=vinod.koul@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).