From: Soren Brinkmann <soren.brinkmann@xilinx.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Jiri Slaby <jslaby@suse.com>
Cc: Michal Simek <michal.simek@xilinx.com>,
linux-serial@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Peter Hurley <peter@hurleysoftware.com>,
Moritz Fischer <moritz.fischer@ettus.com>,
Soren Brinkmann <soren.brinkmann@xilinx.com>
Subject: [PATCH LINUX v5 5/8] tty: xuartps: Improve startup function
Date: Sat, 26 Dec 2015 02:43:53 -0800 [thread overview]
Message-ID: <1451126636-13699-6-git-send-email-soren.brinkmann@xilinx.com> (raw)
In-Reply-To: <1451126636-13699-1-git-send-email-soren.brinkmann@xilinx.com>
The startup function is supposed to initialize the UART for receiving.
Hence, don't enable the TX part. Also, protect HW accesses with the port
lock.
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/serial/xilinx_uartps.c | 20 ++++++++++++--------
1 file changed, 12 insertions(+), 8 deletions(-)
diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index ef114d7a0623..6ffd3bbe3e18 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -758,6 +758,7 @@ static void cdns_uart_set_termios(struct uart_port *port,
*/
static int cdns_uart_startup(struct uart_port *port)
{
+ unsigned long flags;
unsigned int retval = 0, status = 0;
retval = request_irq(port->irq, cdns_uart_isr, 0, CDNS_UART_NAME,
@@ -765,6 +766,8 @@ static int cdns_uart_startup(struct uart_port *port)
if (retval)
return retval;
+ spin_lock_irqsave(&port->lock, flags);
+
/* Disable the TX and RX */
writel(CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS,
port->membase + CDNS_UART_CR_OFFSET);
@@ -775,15 +778,14 @@ static int cdns_uart_startup(struct uart_port *port)
writel(CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST,
port->membase + CDNS_UART_CR_OFFSET);
- status = readl(port->membase + CDNS_UART_CR_OFFSET);
-
- /* Clear the RX disable and TX disable bits and then set the TX enable
- * bit and RX enable bit to enable the transmitter and receiver.
+ /*
+ * Clear the RX disable bit and then set the RX enable bit to enable
+ * the receiver.
*/
- writel((status & ~(CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS))
- | (CDNS_UART_CR_TX_EN | CDNS_UART_CR_RX_EN |
- CDNS_UART_CR_STOPBRK),
- port->membase + CDNS_UART_CR_OFFSET);
+ status = readl(port->membase + CDNS_UART_CR_OFFSET);
+ status &= CDNS_UART_CR_RX_DIS;
+ status |= CDNS_UART_CR_RX_EN;
+ writel(status, port->membase + CDNS_UART_CR_OFFSET);
/* Set the Mode Register with normal mode,8 data bits,1 stop bit,
* no parity.
@@ -814,6 +816,8 @@ static int cdns_uart_startup(struct uart_port *port)
CDNS_UART_IXR_RXTRIG | CDNS_UART_IXR_TOUT,
port->membase + CDNS_UART_IER_OFFSET);
+ spin_unlock_irqrestore(&port->lock, flags);
+
return retval;
}
--
2.6.3.3.g9bb996a
next prev parent reply other threads:[~2015-12-26 10:43 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-26 10:43 [PATCH LINUX v5 0/8] tty: xuartps: Fix lock ups Soren Brinkmann
2015-12-26 10:43 ` [PATCH LINUX v5 1/8] tty: xuartps: Beautify read-modify writes Soren Brinkmann
2015-12-26 10:43 ` [PATCH LINUX v5 2/8] tty: xuartps: Use spinlock to serialize HW access Soren Brinkmann
2015-12-26 10:43 ` [PATCH LINUX v5 3/8] tty: xuartps: Don't consider circular buffer when enabling transmitter Soren Brinkmann
2015-12-26 10:43 ` [PATCH LINUX v5 4/8] tty: xuartps: Clear interrupt status register in shutdown Soren Brinkmann
2015-12-26 10:43 ` Soren Brinkmann [this message]
2015-12-26 10:43 ` [PATCH LINUX v5 6/8] tty: xuartps: Keep lock for whole ISR Soren Brinkmann
2015-12-26 10:43 ` [PATCH LINUX v5 7/8] tty: xuartps: Acquire port lock for shutdown Soren Brinkmann
2015-12-26 10:43 ` [PATCH LINUX v5 8/8] tty: xuartps: Move RX path into helper function Soren Brinkmann
2016-01-10 6:18 ` [PATCH LINUX v5 0/8] tty: xuartps: Fix lock ups Peter Hurley
2016-01-19 0:27 ` Sören Brinkmann
2016-01-19 3:22 ` Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1451126636-13699-6-git-send-email-soren.brinkmann@xilinx.com \
--to=soren.brinkmann@xilinx.com \
--cc=gregkh@linuxfoundation.org \
--cc=jslaby@suse.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=michal.simek@xilinx.com \
--cc=moritz.fischer@ettus.com \
--cc=peter@hurleysoftware.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).