From: Soren Brinkmann <soren.brinkmann@xilinx.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Jiri Slaby <jslaby@suse.com>
Cc: Peter Hurley <peter@hurleysoftware.com>,
Michal Simek <michal.simek@xilinx.com>,
linux-kernel@vger.kernel.org,
Soren Brinkmann <soren.brinkmann@xilinx.com>,
linux-serial@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH LINUX 6/6] tty: xuartps: Consolidate TX handling
Date: Mon, 11 Jan 2016 17:41:41 -0800 [thread overview]
Message-ID: <1452562901-17848-7-git-send-email-soren.brinkmann@xilinx.com> (raw)
In-Reply-To: <1452562901-17848-1-git-send-email-soren.brinkmann@xilinx.com>
start_tx and the ISR used largely identical code to transmit data.
Consolidate that in one place.
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
---
drivers/tty/serial/xilinx_uartps.c | 97 ++++++++++++++++----------------------
1 file changed, 40 insertions(+), 57 deletions(-)
diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index 3ff6e3c2347c..131a3117fbbb 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -239,6 +239,41 @@ static void cdns_uart_handle_rx(struct uart_port *port, unsigned int isrstatus)
tty_flip_buffer_push(&port->state->port);
}
+static void cdns_uart_handle_tx(struct uart_port *port)
+{
+ unsigned int numbytes;
+
+ if (uart_circ_empty(&port->state->xmit)) {
+ writel(CDNS_UART_IXR_TXEMPTY, port->membase + CDNS_UART_IDR);
+ return;
+ }
+
+ numbytes = port->fifosize;
+ while (numbytes && !uart_circ_empty(&port->state->xmit) &&
+ !(readl(port->membase + CDNS_UART_SR) & CDNS_UART_SR_TXFULL)) {
+ /*
+ * Get the data from the UART circular buffer
+ * and write it to the cdns_uart's TX_FIFO
+ * register.
+ */
+ writel(port->state->xmit.buf[port->state->xmit.tail],
+ port->membase + CDNS_UART_FIFO);
+ port->icount.tx++;
+
+ /*
+ * Adjust the tail of the UART buffer and wrap
+ * the buffer if it reaches limit.
+ */
+ port->state->xmit.tail =
+ (port->state->xmit.tail + 1) & (UART_XMIT_SIZE - 1);
+
+ numbytes--;
+ }
+
+ if (uart_circ_chars_pending(&port->state->xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+}
+
/**
* cdns_uart_isr - Interrupt handler
* @irq: Irq number
@@ -250,7 +285,7 @@ static irqreturn_t cdns_uart_isr(int irq, void *dev_id)
{
struct uart_port *port = (struct uart_port *)dev_id;
unsigned long flags;
- unsigned int isrstatus, numbytes;
+ unsigned int isrstatus;
spin_lock_irqsave(&port->lock, flags);
@@ -262,40 +297,8 @@ static irqreturn_t cdns_uart_isr(int irq, void *dev_id)
if (isrstatus & CDNS_UART_RX_IRQS)
cdns_uart_handle_rx(port, isrstatus);
- /* Dispatch an appropriate handler */
- if ((isrstatus & CDNS_UART_IXR_TXEMPTY) == CDNS_UART_IXR_TXEMPTY) {
- if (uart_circ_empty(&port->state->xmit)) {
- writel(CDNS_UART_IXR_TXEMPTY,
- port->membase + CDNS_UART_IDR);
- } else {
- numbytes = port->fifosize;
- /* Break if no more data available in the UART buffer */
- while (numbytes--) {
- if (uart_circ_empty(&port->state->xmit))
- break;
- /* Get the data from the UART circular buffer
- * and write it to the cdns_uart's TX_FIFO
- * register.
- */
- writel(port->state->xmit.buf[
- port->state->xmit.tail],
- port->membase + CDNS_UART_FIFO);
-
- port->icount.tx++;
-
- /* Adjust the tail of the UART buffer and wrap
- * the buffer if it reaches limit.
- */
- port->state->xmit.tail =
- (port->state->xmit.tail + 1) &
- (UART_XMIT_SIZE - 1);
- }
-
- if (uart_circ_chars_pending(
- &port->state->xmit) < WAKEUP_CHARS)
- uart_write_wakeup(port);
- }
- }
+ if ((isrstatus & CDNS_UART_IXR_TXEMPTY) == CDNS_UART_IXR_TXEMPTY)
+ cdns_uart_handle_tx(port);
writel(isrstatus, port->membase + CDNS_UART_ISR);
@@ -502,7 +505,7 @@ static int cdns_uart_clk_notifier_cb(struct notifier_block *nb,
*/
static void cdns_uart_start_tx(struct uart_port *port)
{
- unsigned int status, numbytes = port->fifosize;
+ unsigned int status;
if (uart_tx_stopped(port))
return;
@@ -519,31 +522,11 @@ static void cdns_uart_start_tx(struct uart_port *port)
if (uart_circ_empty(&port->state->xmit))
return;
- while (numbytes-- && ((readl(port->membase + CDNS_UART_SR) &
- CDNS_UART_SR_TXFULL)) != CDNS_UART_SR_TXFULL) {
- /* Break if no more data available in the UART buffer */
- if (uart_circ_empty(&port->state->xmit))
- break;
-
- /* Get the data from the UART circular buffer and
- * write it to the cdns_uart's TX_FIFO register.
- */
- writel(port->state->xmit.buf[port->state->xmit.tail],
- port->membase + CDNS_UART_FIFO);
- port->icount.tx++;
+ cdns_uart_handle_tx(port);
- /* Adjust the tail of the UART buffer and wrap
- * the buffer if it reaches limit.
- */
- port->state->xmit.tail = (port->state->xmit.tail + 1) &
- (UART_XMIT_SIZE - 1);
- }
writel(CDNS_UART_IXR_TXEMPTY, port->membase + CDNS_UART_ISR);
/* Enable the TX Empty interrupt */
writel(CDNS_UART_IXR_TXEMPTY, port->membase + CDNS_UART_IER);
-
- if (uart_circ_chars_pending(&port->state->xmit) < WAKEUP_CHARS)
- uart_write_wakeup(port);
}
/**
--
2.7.0.3.g497ea1e
next prev parent reply other threads:[~2016-01-12 1:41 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-12 1:41 [PATCH LINUX 0/6] Second part of xuartps fixes Soren Brinkmann
2016-01-12 1:41 ` [PATCH LINUX 1/6] tty: xuartps: Move request_irq to after setting up the HW Soren Brinkmann
2016-01-12 1:41 ` [PATCH LINUX 2/6] tty: xuartps: Refactor IRQ handling Soren Brinkmann
2016-01-12 1:41 ` [PATCH LINUX 3/6] tty: xuartps: Cleanup: Reformat if-else Soren Brinkmann
2016-01-12 1:41 ` [PATCH LINUX 4/6] tty: xuartps: Improve sysrq handling Soren Brinkmann
2016-01-12 1:41 ` [PATCH LINUX 5/6] tty: xuartps: Remove '_OFFSET' suffix from #defines Soren Brinkmann
2016-01-12 1:41 ` Soren Brinkmann [this message]
2016-02-02 5:55 ` [PATCH LINUX 0/6] Second part of xuartps fixes Sören Brinkmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1452562901-17848-7-git-send-email-soren.brinkmann@xilinx.com \
--to=soren.brinkmann@xilinx.com \
--cc=gregkh@linuxfoundation.org \
--cc=jslaby@suse.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=michal.simek@xilinx.com \
--cc=peter@hurleysoftware.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).