From: Vikas Manocha <vikas.manocha@st.com>
To: linux-kernel@vger.kernel.org
Cc: Vikas Manocha <vikas.manocha@st.com>,
alexandre.torgue@st.com, patrice.chotard@st.com,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@vger.kernel.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Jiri Slaby <jslaby@suse.com>,
"moderated list:ARM PORT" <linux-arm-kernel@lists.infradead.org>,
"open list:SERIAL DRIVERS" <linux-serial@vger.kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
Russell King <linux@armlinux.org.uk>
Subject: [PATCH 2/3] Arm: dts: stm32: remove extra compatible string from DT & driver
Date: Thu, 28 Sep 2017 15:51:25 -0700 [thread overview]
Message-ID: <1506639114-16913-3-git-send-email-vikas.manocha@st.com> (raw)
In-Reply-To: <1506639114-16913-1-git-send-email-vikas.manocha@st.com>
This patch remove the extra compatibility string "st,stm32-usart" from
driver & device tree.
Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
---
arch/arm/boot/dts/stm32f429.dtsi | 12 ++++++------
arch/arm/boot/dts/stm32f746.dtsi | 12 ++++++------
arch/arm/boot/dts/stm32h743.dtsi | 4 ++--
drivers/tty/serial/stm32-usart.c | 3 ---
4 files changed, 14 insertions(+), 17 deletions(-)
diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index dd7e99b..5d6bfdf 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -315,7 +315,7 @@
};
usart2: serial@40004400 {
- compatible = "st,stm32-usart", "st,stm32-uart";
+ compatible = "st,stm32-uart";
reg = <0x40004400 0x400>;
interrupts = <38>;
clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART2)>;
@@ -323,7 +323,7 @@
};
usart3: serial@40004800 {
- compatible = "st,stm32-usart", "st,stm32-uart";
+ compatible = "st,stm32-uart";
reg = <0x40004800 0x400>;
interrupts = <39>;
clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART3)>;
@@ -387,7 +387,7 @@
};
usart7: serial@40007800 {
- compatible = "st,stm32-usart", "st,stm32-uart";
+ compatible = "st,stm32-uart";
reg = <0x40007800 0x400>;
interrupts = <82>;
clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART7)>;
@@ -395,7 +395,7 @@
};
usart8: serial@40007c00 {
- compatible = "st,stm32-usart", "st,stm32-uart";
+ compatible = "st,stm32-uart";
reg = <0x40007c00 0x400>;
interrupts = <83>;
clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART8)>;
@@ -445,7 +445,7 @@
};
usart1: serial@40011000 {
- compatible = "st,stm32-usart", "st,stm32-uart";
+ compatible = "st,stm32-uart";
reg = <0x40011000 0x400>;
interrupts = <37>;
clocks = <&rcc 0 STM32F4_APB2_CLOCK(USART1)>;
@@ -456,7 +456,7 @@
};
usart6: serial@40011400 {
- compatible = "st,stm32-usart", "st,stm32-uart";
+ compatible = "st,stm32-uart";
reg = <0x40011400 0x400>;
interrupts = <71>;
clocks = <&rcc 0 STM32F4_APB2_CLOCK(USART6)>;
diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi
index 5633860..5f94178 100644
--- a/arch/arm/boot/dts/stm32f746.dtsi
+++ b/arch/arm/boot/dts/stm32f746.dtsi
@@ -136,7 +136,7 @@
};
usart2: serial@40004400 {
- compatible = "st,stm32f7-usart", "st,stm32f7-uart";
+ compatible = "st,stm32f7-uart";
reg = <0x40004400 0x400>;
interrupts = <38>;
clocks = <&rcc 1 CLK_USART2>;
@@ -144,7 +144,7 @@
};
usart3: serial@40004800 {
- compatible = "st,stm32f7-usart", "st,stm32f7-uart";
+ compatible = "st,stm32f7-uart";
reg = <0x40004800 0x400>;
interrupts = <39>;
clocks = <&rcc 1 CLK_USART3>;
@@ -177,7 +177,7 @@
};
usart7: serial@40007800 {
- compatible = "st,stm32f7-usart", "st,stm32f7-uart";
+ compatible = "st,stm32f7-uart";
reg = <0x40007800 0x400>;
interrupts = <82>;
clocks = <&rcc 1 CLK_UART7>;
@@ -185,7 +185,7 @@
};
usart8: serial@40007c00 {
- compatible = "st,stm32f7-usart", "st,stm32f7-uart";
+ compatible = "st,stm32f7-uart";
reg = <0x40007c00 0x400>;
interrupts = <83>;
clocks = <&rcc 1 CLK_UART8>;
@@ -193,7 +193,7 @@
};
usart1: serial@40011000 {
- compatible = "st,stm32f7-usart", "st,stm32f7-uart";
+ compatible = "st,stm32f7-uart";
reg = <0x40011000 0x400>;
interrupts = <37>;
clocks = <&rcc 1 CLK_USART1>;
@@ -201,7 +201,7 @@
};
usart6: serial@40011400 {
- compatible = "st,stm32f7-usart", "st,stm32f7-uart";
+ compatible = "st,stm32f7-uart";
reg = <0x40011400 0x400>;
interrupts = <71>;
clocks = <&rcc 1 CLK_USART6>;
diff --git a/arch/arm/boot/dts/stm32h743.dtsi b/arch/arm/boot/dts/stm32h743.dtsi
index 58ec227..26de315 100644
--- a/arch/arm/boot/dts/stm32h743.dtsi
+++ b/arch/arm/boot/dts/stm32h743.dtsi
@@ -67,7 +67,7 @@
};
usart2: serial@40004400 {
- compatible = "st,stm32f7-usart", "st,stm32f7-uart";
+ compatible = "st,stm32f7-uart";
reg = <0x40004400 0x400>;
interrupts = <38>;
status = "disabled";
@@ -99,7 +99,7 @@
};
usart1: serial@40011000 {
- compatible = "st,stm32f7-usart", "st,stm32f7-uart";
+ compatible = "st,stm32f7-uart";
reg = <0x40011000 0x400>;
interrupts = <37>;
status = "disabled";
diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index 03a58326..46a1f86 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -736,11 +736,8 @@ static struct stm32_port *stm32_of_get_stm32_port(struct platform_device *pdev)
#ifdef CONFIG_OF
static const struct of_device_id stm32_match[] = {
- { .compatible = "st,stm32-usart", .data = &stm32f4_info},
{ .compatible = "st,stm32-uart", .data = &stm32f4_info},
- { .compatible = "st,stm32f7-usart", .data = &stm32f7_info},
{ .compatible = "st,stm32f7-uart", .data = &stm32f7_info},
- { .compatible = "st,stm32h7-usart", .data = &stm32h7_info},
{ .compatible = "st,stm32h7-uart", .data = &stm32h7_info},
{},
};
--
1.9.1
prev parent reply other threads:[~2017-09-28 22:51 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1506639114-16913-1-git-send-email-vikas.manocha@st.com>
2017-09-28 22:51 ` [PATCH 1/3] Arm: dts: stm32: remove extra compatible string for uart Vikas Manocha
2017-10-05 23:32 ` Rob Herring
2017-09-28 22:51 ` Vikas Manocha [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1506639114-16913-3-git-send-email-vikas.manocha@st.com \
--to=vikas.manocha@st.com \
--cc=alexandre.torgue@st.com \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=jslaby@suse.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=mark.rutland@arm.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=patrice.chotard@st.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).