[PATCH 0/6] Series short description

[PATCH 0/6] Series short description

[Alan Cox]

These are some small fixes that didn't quite make the window. Nothing big here
except in file size. The ti_usb_3410 changes fix a bug in the id handling
code and add support for the mts chips - the handling of the rest isn't changed.

The other bits remove two bogus NULL checks and fix the pty kerneldoc before
Randy Dunlap notices ;)


---

Alan Cox (3):
      usb-serial: remove NULL check
      neo: Remove a bogus NULL check
      pty: Fix documentation

Chris Adams (3):
      ti_usb_3410_5052: add Multi-Tech firmware
      ti_usb_3410_5052: add Multi-Tech modem support
      ti_usb_3410_5052: support alternate firmware


 drivers/char/pty.c                    |    4 
 drivers/serial/jsm/jsm_neo.c          |    3 
 drivers/usb/serial/ti_usb_3410_5052.c |   73 ++-
 drivers/usb/serial/ti_usb_3410_5052.h |    8 
 drivers/usb/serial/usb-serial.c       |    3 
 firmware/Makefile                     |    3 
 firmware/WHENCE                       |   16 +
 firmware/mts_cdma.fw.ihex             |  867 ++++++++++++++++++++++++++++++++
 firmware/mts_edge.fw.ihex             |  881 +++++++++++++++++++++++++++++++++
 firmware/mts_gsm.fw.ihex              |  867 ++++++++++++++++++++++++++++++++
 10 files changed, 2699 insertions(+), 26 deletions(-)
 create mode 100644 firmware/mts_cdma.fw.ihex
 create mode 100644 firmware/mts_edge.fw.ihex
 create mode 100644 firmware/mts_gsm.fw.ihex

-- 
Signature

[PATCH 1/6] pty: Fix documentation

[Alan Cox]

From: Alan Cox <alan@redhat.com>

The pty changes and updates for window sizing forgot to correct the
kerneldoc

Signed-off-by: Alan Cox <alan@redhat.com>
---

 drivers/char/pty.c |    4 +---
 1 files changed, 1 insertions(+), 3 deletions(-)


diff --git a/drivers/char/pty.c b/drivers/char/pty.c
index 146c976..31038a0 100644
--- a/drivers/char/pty.c
+++ b/drivers/char/pty.c
@@ -230,9 +230,7 @@ static void pty_set_termios(struct tty_struct *tty,
 /**
  *	pty_do_resize		-	resize event
  *	@tty: tty being resized
- *	@real_tty: real tty (not the same as tty if using a pty/tty pair)
- *	@rows: rows (character)
- *	@cols: cols (character)
+ *	@ws: window size being set.
  *
  *	Update the termios variables and send the neccessary signals to
  *	peform a terminal resize correctly

[PATCH 2/6] neo: Remove a bogus NULL check

[Alan Cox]

From: Alan Cox <alan@redhat.com>

Julia Lawall found an un-needed check in the neo driver. Her patch moves
the check to cover the code dereferencing it, however it cannot be NULL
anyway so remove the NULL check instead.

Signed-off-by: Alan Cox <alan@redhat.com>
---

 drivers/serial/jsm/jsm_neo.c |    3 ---
 1 files changed, 0 insertions(+), 3 deletions(-)


diff --git a/drivers/serial/jsm/jsm_neo.c b/drivers/serial/jsm/jsm_neo.c
index b7584ca..e6390d0 100644
--- a/drivers/serial/jsm/jsm_neo.c
+++ b/drivers/serial/jsm/jsm_neo.c
@@ -577,9 +577,6 @@ static void neo_parse_modem(struct jsm_channel *ch, u8 signals)
 	jsm_printk(MSIGS, INFO, &ch->ch_bd->pci_dev,
 			"neo_parse_modem: port: %d msignals: %x\n", ch->ch_portnum, msignals);
 
-	if (!ch)
-		return;
-
 	/* Scrub off lower bits. They signify delta's, which I don't care about */
 	/* Keep DDCD and DDSR though */
 	msignals &= 0xf8;

[PATCH 3/6] usb-serial: remove NULL check

[Alan Cox]

From: Alan Cox <alan@redhat.com>

Julia Lawell found a case where a NULL check was misplaced in the
usb-serial code. However as the object in question cannot be NULL the
check can simply be removed.

Signed-off-by: Alan Cox <alan@redhat.com>
---

 drivers/usb/serial/usb-serial.c |    3 ---
 1 files changed, 0 insertions(+), 3 deletions(-)


diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 080ade2..cfcfd5a 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -511,9 +511,6 @@ static void usb_serial_port_work(struct work_struct *work)
 
 	dbg("%s - port %d", __func__, port->number);
 
-	if (!port)
-		return;
-
 	tty = tty_port_tty_get(&port->port);
 	if (!tty)
 		return;

[PATCH 4/6] ti_usb_3410_5052: support alternate firmware

[Alan Cox]

From: Chris Adams <cmadams@hiwaay.net>

The TI USB serial driver supports specifying alternate vendor and
product IDs (since the chips can and are used in devices under other
vendor/product IDs).  However, the alternate IDs were not loaded in the
combined product table.  This patch also adds support for loading
alternate firmware for alternate vendor/product IDs.

Signed-off-by: Chris Adams <cmadams@hiwaay.net>
Signed-off-by: Alan Cox <alan@redhat.com>
---

 drivers/usb/serial/ti_usb_3410_5052.c |   44 ++++++++++++++++++++++-----------
 1 files changed, 29 insertions(+), 15 deletions(-)


diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 01d0c70..1cdb151 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -145,7 +145,7 @@ static int ti_command_in_sync(struct ti_device *tdev, __u8 command,
 static int ti_write_byte(struct ti_device *tdev, unsigned long addr,
 	__u8 mask, __u8 byte);
 
-static int ti_download_firmware(struct ti_device *tdev, int type);
+static int ti_download_firmware(struct ti_device *tdev);
 
 /* circular buffer */
 static struct circ_buf *ti_buf_alloc(void);
@@ -176,7 +176,7 @@ static unsigned int product_5052_count;
 /* the array dimension is the number of default entries plus */
 /* TI_EXTRA_VID_PID_COUNT user defined entries plus 1 terminating */
 /* null entry */
-static struct usb_device_id ti_id_table_3410[1+TI_EXTRA_VID_PID_COUNT+1] = {
+static struct usb_device_id ti_id_table_3410[2+TI_EXTRA_VID_PID_COUNT+1] = {
 	{ USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) },
 	{ USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) },
 };
@@ -188,7 +188,7 @@ static struct usb_device_id ti_id_table_5052[4+TI_EXTRA_VID_PID_COUNT+1] = {
 	{ USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) },
 };
 
-static struct usb_device_id ti_id_table_combined[] = {
+static struct usb_device_id ti_id_table_combined[6+2*TI_EXTRA_VID_PID_COUNT+1] = {
 	{ USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) },
 	{ USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) },
 	{ USB_DEVICE(TI_VENDOR_ID, TI_5052_BOOT_PRODUCT_ID) },
@@ -304,21 +304,28 @@ MODULE_DEVICE_TABLE(usb, ti_id_table_combined);
 
 static int __init ti_init(void)
 {
-	int i, j;
+	int i, j, c;
 	int ret;
 
 	/* insert extra vendor and product ids */
+	c = ARRAY_SIZE(ti_id_table_combined) - 2 * TI_EXTRA_VID_PID_COUNT - 1;
 	j = ARRAY_SIZE(ti_id_table_3410) - TI_EXTRA_VID_PID_COUNT - 1;
-	for (i = 0; i < min(vendor_3410_count, product_3410_count); i++, j++) {
+	for (i = 0; i < min(vendor_3410_count, product_3410_count); i++, j++, c++) {
 		ti_id_table_3410[j].idVendor = vendor_3410[i];
 		ti_id_table_3410[j].idProduct = product_3410[i];
 		ti_id_table_3410[j].match_flags = USB_DEVICE_ID_MATCH_DEVICE;
+		ti_id_table_combined[c].idVendor = vendor_3410[i];
+		ti_id_table_combined[c].idProduct = product_3410[i];
+		ti_id_table_combined[c].match_flags = USB_DEVICE_ID_MATCH_DEVICE;
 	}
 	j = ARRAY_SIZE(ti_id_table_5052) - TI_EXTRA_VID_PID_COUNT - 1;
-	for (i = 0; i < min(vendor_5052_count, product_5052_count); i++, j++) {
+	for (i = 0; i < min(vendor_5052_count, product_5052_count); i++, j++, c++) {
 		ti_id_table_5052[j].idVendor = vendor_5052[i];
 		ti_id_table_5052[j].idProduct = product_5052[i];
 		ti_id_table_5052[j].match_flags = USB_DEVICE_ID_MATCH_DEVICE;
+		ti_id_table_combined[c].idVendor = vendor_5052[i];
+		ti_id_table_combined[c].idProduct = product_5052[i];
+		ti_id_table_combined[c].match_flags = USB_DEVICE_ID_MATCH_DEVICE;
 	}
 
 	ret = usb_serial_register(&ti_1port_device);
@@ -390,11 +397,7 @@ static int ti_startup(struct usb_serial *serial)
 
 	/* if we have only 1 configuration, download firmware */
 	if (dev->descriptor.bNumConfigurations == 1) {
-		if (tdev->td_is_3410)
-			status = ti_download_firmware(tdev, 3410);
-		else
-			status = ti_download_firmware(tdev, 5052);
-		if (status)
+		if ((status = ti_download_firmware(tdev)) != 0)
 			goto free_tdev;
 
 		/* 3410 must be reset, 5052 resets itself */
@@ -1671,9 +1674,9 @@ static int ti_do_download(struct usb_device *dev, int pipe,
 	return status;
 }
 
-static int ti_download_firmware(struct ti_device *tdev, int type)
+static int ti_download_firmware(struct ti_device *tdev)
 {
-	int status = -ENOMEM;
+	int status;
 	int buffer_size;
 	__u8 *buffer;
 	struct usb_device *dev = tdev->td_serial->dev;
@@ -1681,9 +1684,18 @@ static int ti_download_firmware(struct ti_device *tdev, int type)
 		tdev->td_serial->port[0]->bulk_out_endpointAddress);
 	const struct firmware *fw_p;
 	char buf[32];
-	sprintf(buf, "ti_usb-%d.bin", type);
 
-	if (request_firmware(&fw_p, buf, &dev->dev)) {
+	/* try ID specific firmware first, then try generic firmware */
+	sprintf(buf, "ti_usb-v%04x-p%04x.fw", dev->descriptor.idVendor,
+	    dev->descriptor.idProduct);
+	if ((status = request_firmware(&fw_p, buf, &dev->dev)) != 0) {
+		if (tdev->td_is_3410)
+			strcpy(buf, "ti_3410.fw");
+		else
+			strcpy(buf, "ti_5052.fw");
+		status = request_firmware(&fw_p, buf, &dev->dev);
+	}
+	if (status) {
 		dev_err(&dev->dev, "%s - firmware not found\n", __func__);
 		return -ENOENT;
 	}
@@ -1699,6 +1711,8 @@ static int ti_download_firmware(struct ti_device *tdev, int type)
 		memset(buffer + fw_p->size, 0xff, buffer_size - fw_p->size);
 		status = ti_do_download(dev, pipe, buffer, fw_p->size);
 		kfree(buffer);
+	} else {
+		status = -ENOMEM;
 	}
 	release_firmware(fw_p);
 	if (status) {

[PATCH 5/6] ti_usb_3410_5052: add Multi-Tech modem support

[Alan Cox]

From: Chris Adams <cmadams@hiwaay.net>

Add Multi-Tech cellular modem support to the ti_usb_3410_5052 driver.

Signed-off-by: Chris Adams <cmadams@hiwaay.net>
Signed-off-by: Alan Cox <alan@redhat.com>
---

 drivers/usb/serial/ti_usb_3410_5052.c |   36 ++++++++++++++++++++++++++++-----
 drivers/usb/serial/ti_usb_3410_5052.h |    8 +++++++
 2 files changed, 39 insertions(+), 5 deletions(-)


diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 1cdb151..dbae994 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -176,9 +176,14 @@ static unsigned int product_5052_count;
 /* the array dimension is the number of default entries plus */
 /* TI_EXTRA_VID_PID_COUNT user defined entries plus 1 terminating */
 /* null entry */
-static struct usb_device_id ti_id_table_3410[2+TI_EXTRA_VID_PID_COUNT+1] = {
+static struct usb_device_id ti_id_table_3410[7+TI_EXTRA_VID_PID_COUNT+1] = {
 	{ USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) },
 	{ USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) },
+	{ USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_NO_FW_PRODUCT_ID) },
+	{ USB_DEVICE(MTS_VENDOR_ID, MTS_CDMA_NO_FW_PRODUCT_ID) },
+	{ USB_DEVICE(MTS_VENDOR_ID, MTS_CDMA_PRODUCT_ID) },
+	{ USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_PRODUCT_ID) },
+	{ USB_DEVICE(MTS_VENDOR_ID, MTS_EDGE_PRODUCT_ID) },
 };
 
 static struct usb_device_id ti_id_table_5052[4+TI_EXTRA_VID_PID_COUNT+1] = {
@@ -191,6 +196,11 @@ static struct usb_device_id ti_id_table_5052[4+TI_EXTRA_VID_PID_COUNT+1] = {
 static struct usb_device_id ti_id_table_combined[6+2*TI_EXTRA_VID_PID_COUNT+1] = {
 	{ USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) },
 	{ USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) },
+	{ USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_NO_FW_PRODUCT_ID) },
+	{ USB_DEVICE(MTS_VENDOR_ID, MTS_CDMA_NO_FW_PRODUCT_ID) },
+	{ USB_DEVICE(MTS_VENDOR_ID, MTS_CDMA_PRODUCT_ID) },
+	{ USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_PRODUCT_ID) },
+	{ USB_DEVICE(MTS_VENDOR_ID, MTS_EDGE_PRODUCT_ID) },
 	{ USB_DEVICE(TI_VENDOR_ID, TI_5052_BOOT_PRODUCT_ID) },
 	{ USB_DEVICE(TI_VENDOR_ID, TI_5152_BOOT_PRODUCT_ID) },
 	{ USB_DEVICE(TI_VENDOR_ID, TI_5052_EEPROM_PRODUCT_ID) },
@@ -1689,10 +1699,26 @@ static int ti_download_firmware(struct ti_device *tdev)
 	sprintf(buf, "ti_usb-v%04x-p%04x.fw", dev->descriptor.idVendor,
 	    dev->descriptor.idProduct);
 	if ((status = request_firmware(&fw_p, buf, &dev->dev)) != 0) {
-		if (tdev->td_is_3410)
-			strcpy(buf, "ti_3410.fw");
-		else
-			strcpy(buf, "ti_5052.fw");
+		buf[0] = '\0';
+		if (dev->descriptor.idVendor == MTS_VENDOR_ID) {
+			switch (dev->descriptor.idProduct) {
+			case MTS_CDMA_PRODUCT_ID:
+				strcpy(buf, "mts_cdma.fw");
+				break;
+			case MTS_GSM_PRODUCT_ID:
+				strcpy(buf, "mts_gsm.fw");
+				break;
+			case MTS_EDGE_PRODUCT_ID:
+				strcpy(buf, "mts_edge.fw");
+				break;
+			}
+		}
+		if (buf[0] == '\0') {
+			if (tdev->td_is_3410)
+				strcpy(buf, "ti_3410.fw");
+			else
+				strcpy(buf, "ti_5052.fw");
+		}
 		status = request_firmware(&fw_p, buf, &dev->dev);
 	}
 	if (status) {
diff --git a/drivers/usb/serial/ti_usb_3410_5052.h b/drivers/usb/serial/ti_usb_3410_5052.h
index b5541bf..7e4752f 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.h
+++ b/drivers/usb/serial/ti_usb_3410_5052.h
@@ -34,6 +34,14 @@
 #define TI_5052_EEPROM_PRODUCT_ID	0x505A	/* EEPROM, no firmware */
 #define TI_5052_FIRMWARE_PRODUCT_ID	0x505F	/* firmware is running */
 
+/* Multi-Tech vendor and product ids */
+#define MTS_VENDOR_ID			0x06E0
+#define MTS_GSM_NO_FW_PRODUCT_ID	0xF108
+#define MTS_CDMA_NO_FW_PRODUCT_ID	0xF109
+#define MTS_CDMA_PRODUCT_ID		0xF110
+#define MTS_GSM_PRODUCT_ID		0xF111
+#define MTS_EDGE_PRODUCT_ID		0xF112
+
 /* Commands */
 #define TI_GET_VERSION			0x01
 #define TI_GET_PORT_STATUS		0x02

[PATCH 0/6] Series short description

[Alan Cox]

With corrections noted. This is going to cause problems somewhere I'm sure
but I don't see any way to avoid that apart from trying it.

Alan

---

Alan Cox (6):
      vt: push the tty_lock down into the map handling
      vt: tackle the main part of the selection logic
      vt: waitevent is self locked so drop the tty_lock
      vt: push down tioclinux cases
      vt: push down the tty lock so we can see what is left to tackle
      vt: sort out locking for font handling


 drivers/tty/vt/consolemap.c |  119 ++++++++++++++++++++++++++++++++-----------
 drivers/tty/vt/selection.c  |   49 +++++++++++++-----
 drivers/tty/vt/vc_screen.c  |    4 +
 drivers/tty/vt/vt.c         |   37 ++++++++++---
 drivers/tty/vt/vt_ioctl.c   |   68 ++++++++++++-------------
 include/linux/vt_kern.h     |    1 
 6 files changed, 186 insertions(+), 92 deletions(-)

-- 
 "And the nice thing is you don't need to be able to type, because every
  possible keystroke does {something} for/to you. Anything from point out
  off-by-one errors to perform a sex change on your gerbil."
			-- Bill Davidsen describing emacs