* [PATCH 0/6] Clean up tty buffering v page allocation
@ 2010-02-18 16:43 Alan Cox
2010-02-18 16:43 ` [PATCH 1/6] tty: Keep the default buffering to sub-page units Alan Cox
` (5 more replies)
0 siblings, 6 replies; 7+ messages in thread
From: Alan Cox @ 2010-02-18 16:43 UTC (permalink / raw)
To: greg, linux-serial
Resend with all the bits in the right patches (guess who forgot to do an stg
refresh at one point).
---
Alan Cox (6):
tty: Fix up char drivers request_room usage
tty: kill request_room for USB ACM class
tty: sort out the request_room handling for whiteheat
tty: Prune uses of tty_request_room in the USB layer
tty: Add a function to insert a string of characters with the same flag
tty: Keep the default buffering to sub-page units
drivers/char/nozomi.c | 2 --
drivers/char/serial167.c | 3 +--
drivers/char/specialix.c | 2 --
drivers/char/tty_buffer.c | 17 ++++++++++-------
drivers/serial/icom.c | 1 -
drivers/serial/ioc3_serial.c | 3 +--
drivers/usb/class/cdc-acm.c | 1 -
drivers/usb/serial/ark3116.c | 1 -
drivers/usb/serial/cyberjack.c | 1 -
drivers/usb/serial/cypress_m8.c | 10 +++-------
drivers/usb/serial/digi_acceleport.c | 13 ++-----------
drivers/usb/serial/empeg.c | 1 -
drivers/usb/serial/garmin_gps.c | 1 -
drivers/usb/serial/io_edgeport.c | 19 +++++++------------
drivers/usb/serial/io_ti.c | 1 -
drivers/usb/serial/ipaq.c | 1 -
drivers/usb/serial/ipw.c | 1 -
drivers/usb/serial/ir-usb.c | 6 ++----
drivers/usb/serial/kl5kusb105.c | 1 -
drivers/usb/serial/kobil_sct.c | 1 -
drivers/usb/serial/mos7720.c | 1 -
drivers/usb/serial/mos7840.c | 1 -
drivers/usb/serial/navman.c | 1 -
drivers/usb/serial/opticon.c | 11 +++--------
drivers/usb/serial/option.c | 1 -
drivers/usb/serial/pl2303.c | 1 -
drivers/usb/serial/sierra.c | 1 -
drivers/usb/serial/spcp8x5.c | 6 ++----
drivers/usb/serial/symbolserial.c | 10 ++--------
drivers/usb/serial/ti_usb_3410_5052.c | 3 +--
drivers/usb/serial/visor.c | 10 +++-------
drivers/usb/serial/whiteheat.c | 18 +++---------------
include/linux/tty.h | 10 ++++++++++
include/linux/tty_flip.h | 7 ++++++-
34 files changed, 56 insertions(+), 111 deletions(-)
--
"..hoping for a hanged parliament"
"It's hung not hanged"
"Hanged.. you misunderstand quite how cross the masses are"
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH 1/6] tty: Keep the default buffering to sub-page units
2010-02-18 16:43 [PATCH 0/6] Clean up tty buffering v page allocation Alan Cox
@ 2010-02-18 16:43 ` Alan Cox
2010-02-18 16:43 ` [PATCH 2/6] tty: Add a function to insert a string of characters with the same flag Alan Cox
` (4 subsequent siblings)
5 siblings, 0 replies; 7+ messages in thread
From: Alan Cox @ 2010-02-18 16:43 UTC (permalink / raw)
To: greg, linux-serial
We allocate during interrupts so while our buffering is normally diced up
small anyway on some hardware at speed we can pressure the VM excessively
for page pairs. We don't really need big buffers to be linear so don't try
so hard.
In order to make this work well we will tidy up excess callers to request_room,
which cannot itself enforce this break up.
Signed-off-by: Alan Cox <alan@linux.intel.com>
---
drivers/char/tty_buffer.c | 6 ++++--
include/linux/tty.h | 10 ++++++++++
2 files changed, 14 insertions(+), 2 deletions(-)
diff --git a/drivers/char/tty_buffer.c b/drivers/char/tty_buffer.c
index 66fa4e1..f27c4d6 100644
--- a/drivers/char/tty_buffer.c
+++ b/drivers/char/tty_buffer.c
@@ -247,7 +247,8 @@ int tty_insert_flip_string(struct tty_struct *tty, const unsigned char *chars,
{
int copied = 0;
do {
- int space = tty_buffer_request_room(tty, size - copied);
+ int goal = min(size - copied, TTY_BUFFER_PAGE);
+ int space = tty_buffer_request_room(tty, goal);
struct tty_buffer *tb = tty->buf.tail;
/* If there is no space then tb may be NULL */
if (unlikely(space == 0))
@@ -283,7 +284,8 @@ int tty_insert_flip_string_flags(struct tty_struct *tty,
{
int copied = 0;
do {
- int space = tty_buffer_request_room(tty, size - copied);
+ int goal = min(size - copied, TTY_BUFFER_PAGE);
+ int space = tty_buffer_request_room(tty, goal);
struct tty_buffer *tb = tty->buf.tail;
/* If there is no space then tb may be NULL */
if (unlikely(space == 0))
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 6abfcf5..d96e588 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -68,6 +68,16 @@ struct tty_buffer {
unsigned long data[0];
};
+/*
+ * We default to dicing tty buffer allocations to this many characters
+ * in order to avoid multiple page allocations. We assume tty_buffer itself
+ * is under 256 bytes. See tty_buffer_find for the allocation logic this
+ * must match
+ */
+
+#define TTY_BUFFER_PAGE ((PAGE_SIZE - 256) / 2)
+
+
struct tty_bufhead {
struct delayed_work work;
spinlock_t lock;
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH 2/6] tty: Add a function to insert a string of characters with the same flag
2010-02-18 16:43 [PATCH 0/6] Clean up tty buffering v page allocation Alan Cox
2010-02-18 16:43 ` [PATCH 1/6] tty: Keep the default buffering to sub-page units Alan Cox
@ 2010-02-18 16:43 ` Alan Cox
2010-02-18 16:44 ` [PATCH 3/6] tty: Prune uses of tty_request_room in the USB layer Alan Cox
` (3 subsequent siblings)
5 siblings, 0 replies; 7+ messages in thread
From: Alan Cox @ 2010-02-18 16:43 UTC (permalink / raw)
To: greg, linux-serial
The USB drivers often want to insert a series of bytes all with the same
flag set - provide a helper for this case.
Signed-off-by: Alan Cox <alan@linux.intel.com>
---
drivers/char/tty_buffer.c | 11 ++++++-----
include/linux/tty_flip.h | 7 ++++++-
2 files changed, 12 insertions(+), 6 deletions(-)
diff --git a/drivers/char/tty_buffer.c b/drivers/char/tty_buffer.c
index f27c4d6..af8d977 100644
--- a/drivers/char/tty_buffer.c
+++ b/drivers/char/tty_buffer.c
@@ -231,9 +231,10 @@ int tty_buffer_request_room(struct tty_struct *tty, size_t size)
EXPORT_SYMBOL_GPL(tty_buffer_request_room);
/**
- * tty_insert_flip_string - Add characters to the tty buffer
+ * tty_insert_flip_string_fixed_flag - Add characters to the tty buffer
* @tty: tty structure
* @chars: characters
+ * @flag: flag value for each character
* @size: size
*
* Queue a series of bytes to the tty buffering. All the characters
@@ -242,8 +243,8 @@ EXPORT_SYMBOL_GPL(tty_buffer_request_room);
* Locking: Called functions may take tty->buf.lock
*/
-int tty_insert_flip_string(struct tty_struct *tty, const unsigned char *chars,
- size_t size)
+int tty_insert_flip_string_fixed_flag(struct tty_struct *tty,
+ const unsigned char *chars, char flag, size_t size)
{
int copied = 0;
do {
@@ -254,7 +255,7 @@ int tty_insert_flip_string(struct tty_struct *tty, const unsigned char *chars,
if (unlikely(space == 0))
break;
memcpy(tb->char_buf_ptr + tb->used, chars, space);
- memset(tb->flag_buf_ptr + tb->used, TTY_NORMAL, space);
+ memset(tb->flag_buf_ptr + tb->used, flag, space);
tb->used += space;
copied += space;
chars += space;
@@ -263,7 +264,7 @@ int tty_insert_flip_string(struct tty_struct *tty, const unsigned char *chars,
} while (unlikely(size > copied));
return copied;
}
-EXPORT_SYMBOL(tty_insert_flip_string);
+EXPORT_SYMBOL(tty_insert_flip_string_fixed_flag);
/**
* tty_insert_flip_string_flags - Add characters to the tty buffer
diff --git a/include/linux/tty_flip.h b/include/linux/tty_flip.h
index eb677cf..9239d03 100644
--- a/include/linux/tty_flip.h
+++ b/include/linux/tty_flip.h
@@ -2,8 +2,8 @@
#define _LINUX_TTY_FLIP_H
extern int tty_buffer_request_room(struct tty_struct *tty, size_t size);
-extern int tty_insert_flip_string(struct tty_struct *tty, const unsigned char *chars, size_t size);
extern int tty_insert_flip_string_flags(struct tty_struct *tty, const unsigned char *chars, const char *flags, size_t size);
+extern int tty_insert_flip_string_fixed_flag(struct tty_struct *tty, const unsigned char *chars, char flag, size_t size);
extern int tty_prepare_flip_string(struct tty_struct *tty, unsigned char **chars, size_t size);
extern int tty_prepare_flip_string_flags(struct tty_struct *tty, unsigned char **chars, char **flags, size_t size);
void tty_schedule_flip(struct tty_struct *tty);
@@ -20,4 +20,9 @@ static inline int tty_insert_flip_char(struct tty_struct *tty,
return tty_insert_flip_string_flags(tty, &ch, &flag, 1);
}
+static inline int tty_insert_flip_string(struct tty_struct *tty, const unsigned char *chars, size_t size)
+{
+ return tty_insert_flip_string_fixed_flag(tty, chars, TTY_NORMAL, size);
+}
+
#endif /* _LINUX_TTY_FLIP_H */
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH 3/6] tty: Prune uses of tty_request_room in the USB layer
2010-02-18 16:43 [PATCH 0/6] Clean up tty buffering v page allocation Alan Cox
2010-02-18 16:43 ` [PATCH 1/6] tty: Keep the default buffering to sub-page units Alan Cox
2010-02-18 16:43 ` [PATCH 2/6] tty: Add a function to insert a string of characters with the same flag Alan Cox
@ 2010-02-18 16:44 ` Alan Cox
2010-02-18 16:44 ` [PATCH 4/6] tty: sort out the request_room handling for whiteheat Alan Cox
` (2 subsequent siblings)
5 siblings, 0 replies; 7+ messages in thread
From: Alan Cox @ 2010-02-18 16:44 UTC (permalink / raw)
To: greg, linux-serial
We have lots of callers that do not need to do this in the first place.
Remove the calls as they both cost CPU and for big buffers can mess up the
multi-page allocation avoidance.
Signed-off-by: Alan Cox <alan@linux.intel.com>
---
drivers/usb/serial/ark3116.c | 1 -
drivers/usb/serial/cyberjack.c | 1 -
drivers/usb/serial/cypress_m8.c | 10 +++-------
drivers/usb/serial/digi_acceleport.c | 13 ++-----------
drivers/usb/serial/empeg.c | 1 -
drivers/usb/serial/garmin_gps.c | 1 -
drivers/usb/serial/io_edgeport.c | 19 +++++++------------
drivers/usb/serial/io_ti.c | 1 -
drivers/usb/serial/ipaq.c | 1 -
drivers/usb/serial/ipw.c | 1 -
drivers/usb/serial/ir-usb.c | 6 ++----
drivers/usb/serial/kl5kusb105.c | 1 -
drivers/usb/serial/kobil_sct.c | 1 -
drivers/usb/serial/mos7720.c | 1 -
drivers/usb/serial/mos7840.c | 1 -
drivers/usb/serial/navman.c | 1 -
drivers/usb/serial/opticon.c | 11 +++--------
drivers/usb/serial/option.c | 1 -
drivers/usb/serial/pl2303.c | 1 -
drivers/usb/serial/sierra.c | 1 -
drivers/usb/serial/spcp8x5.c | 6 ++----
drivers/usb/serial/symbolserial.c | 10 ++--------
drivers/usb/serial/ti_usb_3410_5052.c | 3 +--
drivers/usb/serial/visor.c | 10 +++-------
24 files changed, 25 insertions(+), 78 deletions(-)
diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c
index 1f75fac..547c944 100644
--- a/drivers/usb/serial/ark3116.c
+++ b/drivers/usb/serial/ark3116.c
@@ -733,7 +733,6 @@ static void ark3116_read_bulk_callback(struct urb *urb)
tty = tty_port_tty_get(&port->port);
if (tty) {
- tty_buffer_request_room(tty, urb->actual_length + 1);
/* overrun is special, not associated with a char */
if (unlikely(lsr & UART_LSR_OE))
tty_insert_flip_char(tty, 0, TTY_OVERRUN);
diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c
index 23c8bd6..ba4ae6c 100644
--- a/drivers/usb/serial/cyberjack.c
+++ b/drivers/usb/serial/cyberjack.c
@@ -395,7 +395,6 @@ static void cyberjack_read_bulk_callback(struct urb *urb)
return;
}
if (urb->actual_length) {
- tty_buffer_request_room(tty, urb->actual_length);
tty_insert_flip_string(tty, data, urb->actual_length);
tty_flip_buffer_push(tty);
}
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index 3370dc4..47c5a0d 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -1307,13 +1307,9 @@ static void cypress_read_int_callback(struct urb *urb)
spin_unlock_irqrestore(&priv->lock, flags);
/* process read if there is data other than line status */
- if (tty && (bytes > i)) {
- bytes = tty_buffer_request_room(tty, bytes);
- for (; i < bytes ; ++i) {
- dbg("pushing byte number %d - %d - %c", i, data[i],
- data[i]);
- tty_insert_flip_char(tty, data[i], tty_flag);
- }
+ if (tty && bytes > i) {
+ tty_insert_flip_string_fixed_flag(tty, data + i,
+ bytes - i, tty_flag);
tty_flip_buffer_push(tty);
}
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index 3b63484..3817228 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -1658,7 +1658,6 @@ static int digi_read_inb_callback(struct urb *urb)
int port_status = ((unsigned char *)urb->transfer_buffer)[2];
unsigned char *data = ((unsigned char *)urb->transfer_buffer) + 3;
int flag, throttled;
- int i;
int status = urb->status;
/* do not process callbacks on closed ports */
@@ -1705,17 +1704,9 @@ static int digi_read_inb_callback(struct urb *urb)
/* data length is len-1 (one byte of len is port_status) */
--len;
-
- len = tty_buffer_request_room(tty, len);
if (len > 0) {
- /* Hot path */
- if (flag == TTY_NORMAL)
- tty_insert_flip_string(tty, data, len);
- else {
- for (i = 0; i < len; i++)
- tty_insert_flip_char(tty,
- data[i], flag);
- }
+ tty_insert_flip_string_fixed_flag(tty, data, len,
+ flag);
tty_flip_buffer_push(tty);
}
}
diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c
index d02e604..5f740a1 100644
--- a/drivers/usb/serial/empeg.c
+++ b/drivers/usb/serial/empeg.c
@@ -346,7 +346,6 @@ static void empeg_read_bulk_callback(struct urb *urb)
tty = tty_port_tty_get(&port->port);
if (urb->actual_length) {
- tty_buffer_request_room(tty, urb->actual_length);
tty_insert_flip_string(tty, data, urb->actual_length);
tty_flip_buffer_push(tty);
bytes_in += urb->actual_length;
diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c
index 6bbedfb..a42b29a 100644
--- a/drivers/usb/serial/garmin_gps.c
+++ b/drivers/usb/serial/garmin_gps.c
@@ -271,7 +271,6 @@ static void send_to_tty(struct usb_serial_port *port,
usb_serial_debug_data(debug, &port->dev,
__func__, actual_length, data);
- tty_buffer_request_room(tty, actual_length);
tty_insert_flip_string(tty, data, actual_length);
tty_flip_buffer_push(tty);
}
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index 1467755..e40ec6d 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -2055,18 +2055,13 @@ static void edge_tty_recv(struct device *dev, struct tty_struct *tty,
{
int cnt;
- do {
- cnt = tty_buffer_request_room(tty, length);
- if (cnt < length) {
- dev_err(dev, "%s - dropping data, %d bytes lost\n",
- __func__, length - cnt);
- if (cnt == 0)
- break;
- }
- tty_insert_flip_string(tty, data, cnt);
- data += cnt;
- length -= cnt;
- } while (length > 0);
+ cnt = tty_insert_flip_string(tty, data, length);
+ if (cnt < length) {
+ dev_err(dev, "%s - dropping data, %d bytes lost\n",
+ __func__, length - cnt);
+ }
+ data += cnt;
+ length -= cnt;
tty_flip_buffer_push(tty);
}
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index 8f0aa64..b84befa 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -1820,7 +1820,6 @@ static void edge_tty_recv(struct device *dev, struct tty_struct *tty,
{
int queued;
- tty_buffer_request_room(tty, length);
queued = tty_insert_flip_string(tty, data, length);
if (queued < length)
dev_err(dev, "%s - dropping data, %d bytes lost\n",
diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c
index d6231c3..3fea929 100644
--- a/drivers/usb/serial/ipaq.c
+++ b/drivers/usb/serial/ipaq.c
@@ -747,7 +747,6 @@ static void ipaq_read_bulk_callback(struct urb *urb)
tty = tty_port_tty_get(&port->port);
if (tty && urb->actual_length) {
- tty_buffer_request_room(tty, urb->actual_length);
tty_insert_flip_string(tty, data, urb->actual_length);
tty_flip_buffer_push(tty);
bytes_in += urb->actual_length;
diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c
index c0afa7a..e1d0784 100644
--- a/drivers/usb/serial/ipw.c
+++ b/drivers/usb/serial/ipw.c
@@ -172,7 +172,6 @@ static void ipw_read_bulk_callback(struct urb *urb)
tty = tty_port_tty_get(&port->port);
if (tty && urb->actual_length) {
- tty_buffer_request_room(tty, urb->actual_length);
tty_insert_flip_string(tty, data, urb->actual_length);
tty_flip_buffer_push(tty);
}
diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c
index fc2ab81..c3e5d50 100644
--- a/drivers/usb/serial/ir-usb.c
+++ b/drivers/usb/serial/ir-usb.c
@@ -462,10 +462,8 @@ static void ir_read_bulk_callback(struct urb *urb)
usb_serial_debug_data(debug, &port->dev, __func__,
urb->actual_length, data);
tty = tty_port_tty_get(&port->port);
- if (tty_buffer_request_room(tty, urb->actual_length - 1)) {
- tty_insert_flip_string(tty, data+1, urb->actual_length - 1);
- tty_flip_buffer_push(tty);
- }
+ tty_insert_flip_string(tty, data+1, urb->actual_length - 1);
+ tty_flip_buffer_push(tty);
tty_kref_put(tty);
/*
diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
index 2dbe22a..8eef91b 100644
--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -699,7 +699,6 @@ static void klsi_105_read_bulk_callback(struct urb *urb)
bytes_sent = urb->actual_length - 2;
}
- tty_buffer_request_room(tty, bytes_sent);
tty_insert_flip_string(tty, data + 2, bytes_sent);
tty_flip_buffer_push(tty);
tty_kref_put(tty);
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index fc78553..c113a2a 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -388,7 +388,6 @@ static void kobil_read_int_callback(struct urb *urb)
*/
/* END DEBUG */
- tty_buffer_request_room(tty, urb->actual_length);
tty_insert_flip_string(tty, data, urb->actual_length);
tty_flip_buffer_push(tty);
}
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index e0aa031..900cfb8 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -290,7 +290,6 @@ static void mos7720_bulk_in_callback(struct urb *urb)
tty = tty_port_tty_get(&port->port);
if (tty && urb->actual_length) {
- tty_buffer_request_room(tty, urb->actual_length);
tty_insert_flip_string(tty, data, urb->actual_length);
tty_flip_buffer_push(tty);
}
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index c89a89c..2fda1c0 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -764,7 +764,6 @@ static void mos7840_bulk_in_callback(struct urb *urb)
if (urb->actual_length) {
tty = tty_port_tty_get(&mos7840_port->port->port);
if (tty) {
- tty_buffer_request_room(tty, urb->actual_length);
tty_insert_flip_string(tty, data, urb->actual_length);
dbg(" %s ", data);
tty_flip_buffer_push(tty);
diff --git a/drivers/usb/serial/navman.c b/drivers/usb/serial/navman.c
index efa61bc..04a6cbb 100644
--- a/drivers/usb/serial/navman.c
+++ b/drivers/usb/serial/navman.c
@@ -66,7 +66,6 @@ static void navman_read_int_callback(struct urb *urb)
tty = tty_port_tty_get(&port->port);
if (tty && urb->actual_length) {
- tty_buffer_request_room(tty, urb->actual_length);
tty_insert_flip_string(tty, data, urb->actual_length);
tty_flip_buffer_push(tty);
}
diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c
index 05b3ac4..4972197 100644
--- a/drivers/usb/serial/opticon.c
+++ b/drivers/usb/serial/opticon.c
@@ -55,7 +55,6 @@ static void opticon_bulk_callback(struct urb *urb)
int status = urb->status;
struct tty_struct *tty;
int result;
- int available_room = 0;
int data_length;
dbg("%s - port %d", __func__, port->number);
@@ -96,13 +95,9 @@ static void opticon_bulk_callback(struct urb *urb)
/* real data, send it to the tty layer */
tty = tty_port_tty_get(&port->port);
if (tty) {
- available_room = tty_buffer_request_room(tty,
- data_length);
- if (available_room) {
- tty_insert_flip_string(tty, data,
- available_room);
- tty_flip_buffer_push(tty);
- }
+ tty_insert_flip_string(tty, data,
+ data_length);
+ tty_flip_buffer_push(tty);
tty_kref_put(tty);
}
} else {
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 51b0beb..ea92a6a 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -964,7 +964,6 @@ static void option_indat_callback(struct urb *urb)
} else {
tty = tty_port_tty_get(&port->port);
if (urb->actual_length) {
- tty_buffer_request_room(tty, urb->actual_length);
tty_insert_flip_string(tty, data, urb->actual_length);
tty_flip_buffer_push(tty);
} else
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 767000c..a3e5a56 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -1042,7 +1042,6 @@ static void pl2303_push_data(struct tty_struct *tty,
tty_flag = TTY_FRAME;
dbg("%s - tty_flag = %d", __func__, tty_flag);
- tty_buffer_request_room(tty, urb->actual_length + 1);
/* overrun is special, not associated with a char */
if (line_status & UART_OVERRUN_ERROR)
tty_insert_flip_char(tty, 0, TTY_OVERRUN);
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index bb0d56c..9ff8c65 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -605,7 +605,6 @@ static void sierra_indat_callback(struct urb *urb)
if (urb->actual_length) {
tty = tty_port_tty_get(&port->port);
- tty_buffer_request_room(tty, urb->actual_length);
tty_insert_flip_string(tty, data, urb->actual_length);
tty_flip_buffer_push(tty);
diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c
index ebd1688..5efb5f0 100644
--- a/drivers/usb/serial/spcp8x5.c
+++ b/drivers/usb/serial/spcp8x5.c
@@ -677,7 +677,6 @@ static void spcp8x5_read_bulk_callback(struct urb *urb)
struct tty_struct *tty;
unsigned char *data = urb->transfer_buffer;
unsigned long flags;
- int i;
int result = urb->status;
u8 status;
char tty_flag;
@@ -726,12 +725,11 @@ static void spcp8x5_read_bulk_callback(struct urb *urb)
tty = tty_port_tty_get(&port->port);
if (tty && urb->actual_length) {
- tty_buffer_request_room(tty, urb->actual_length + 1);
/* overrun is special, not associated with a char */
if (status & UART_OVERRUN_ERROR)
tty_insert_flip_char(tty, 0, TTY_OVERRUN);
- for (i = 0; i < urb->actual_length; ++i)
- tty_insert_flip_char(tty, data[i], tty_flag);
+ tty_insert_flip_string_fixed_flag(tty, data,
+ urb->actual_length, tty_flag);
tty_flip_buffer_push(tty);
}
tty_kref_put(tty);
diff --git a/drivers/usb/serial/symbolserial.c b/drivers/usb/serial/symbolserial.c
index bd0fd6e..ee190cc 100644
--- a/drivers/usb/serial/symbolserial.c
+++ b/drivers/usb/serial/symbolserial.c
@@ -51,7 +51,6 @@ static void symbol_int_callback(struct urb *urb)
int status = urb->status;
struct tty_struct *tty;
int result;
- int available_room = 0;
int data_length;
dbg("%s - port %d", __func__, port->number);
@@ -89,13 +88,8 @@ static void symbol_int_callback(struct urb *urb)
*/
tty = tty_port_tty_get(&port->port);
if (tty) {
- available_room = tty_buffer_request_room(tty,
- data_length);
- if (available_room) {
- tty_insert_flip_string(tty, &data[1],
- available_room);
- tty_flip_buffer_push(tty);
- }
+ tty_insert_flip_string(tty, &data[1], data_length);
+ tty_flip_buffer_push(tty);
tty_kref_put(tty);
}
} else {
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 1e9dc88..0afe5c7 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -1271,14 +1271,13 @@ static void ti_recv(struct device *dev, struct tty_struct *tty,
int cnt;
do {
- cnt = tty_buffer_request_room(tty, length);
+ cnt = tty_insert_flip_string(tty, data, length);
if (cnt < length) {
dev_err(dev, "%s - dropping data, %d bytes lost\n",
__func__, length - cnt);
if (cnt == 0)
break;
}
- tty_insert_flip_string(tty, data, cnt);
tty_flip_buffer_push(tty);
data += cnt;
length -= cnt;
diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c
index 178e4d9..99eb983 100644
--- a/drivers/usb/serial/visor.c
+++ b/drivers/usb/serial/visor.c
@@ -503,13 +503,9 @@ static void visor_read_bulk_callback(struct urb *urb)
if (urb->actual_length) {
tty = tty_port_tty_get(&port->port);
if (tty) {
- available_room = tty_buffer_request_room(tty,
- urb->actual_length);
- if (available_room) {
- tty_insert_flip_string(tty, data,
- available_room);
- tty_flip_buffer_push(tty);
- }
+ tty_insert_flip_string(tty, data,
+ urb->actual_length);
+ tty_flip_buffer_push(tty);
tty_kref_put(tty);
}
spin_lock(&priv->lock);
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH 4/6] tty: sort out the request_room handling for whiteheat
2010-02-18 16:43 [PATCH 0/6] Clean up tty buffering v page allocation Alan Cox
` (2 preceding siblings ...)
2010-02-18 16:44 ` [PATCH 3/6] tty: Prune uses of tty_request_room in the USB layer Alan Cox
@ 2010-02-18 16:44 ` Alan Cox
2010-02-18 16:44 ` [PATCH 5/6] tty: kill request_room for USB ACM class Alan Cox
2010-02-18 16:44 ` [PATCH 6/6] tty: Fix up char drivers request_room usage Alan Cox
5 siblings, 0 replies; 7+ messages in thread
From: Alan Cox @ 2010-02-18 16:44 UTC (permalink / raw)
To: greg, linux-serial
This driver has its own (surplus) backup queue system which wants removing
from the receive overflow logic.
Do this at the same time as removing the request_room logic
Signed-off-by: Alan Cox <alan@linux.intel.com>
---
drivers/usb/serial/whiteheat.c | 18 +++---------------
1 files changed, 3 insertions(+), 15 deletions(-)
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index e89e0d5..12ed820 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -1492,21 +1492,9 @@ static void rx_data_softint(struct work_struct *work)
wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
urb = wrap->urb;
- if (tty && urb->actual_length) {
- int len = tty_buffer_request_room(tty,
- urb->actual_length);
- /* This stuff can go away now I suspect */
- if (unlikely(len < urb->actual_length)) {
- spin_lock_irqsave(&info->lock, flags);
- list_add(tmp, &info->rx_urb_q);
- spin_unlock_irqrestore(&info->lock, flags);
- tty_flip_buffer_push(tty);
- schedule_work(&info->rx_work);
- goto out;
- }
- tty_insert_flip_string(tty, urb->transfer_buffer, len);
- sent += len;
- }
+ if (tty && urb->actual_length)
+ sent += tty_insert_flip_string(tty,
+ urb->transfer_buffer, urb->actual_length);
urb->dev = port->serial->dev;
result = usb_submit_urb(urb, GFP_ATOMIC);
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH 5/6] tty: kill request_room for USB ACM class
2010-02-18 16:43 [PATCH 0/6] Clean up tty buffering v page allocation Alan Cox
` (3 preceding siblings ...)
2010-02-18 16:44 ` [PATCH 4/6] tty: sort out the request_room handling for whiteheat Alan Cox
@ 2010-02-18 16:44 ` Alan Cox
2010-02-18 16:44 ` [PATCH 6/6] tty: Fix up char drivers request_room usage Alan Cox
5 siblings, 0 replies; 7+ messages in thread
From: Alan Cox @ 2010-02-18 16:44 UTC (permalink / raw)
To: greg, linux-serial
Signed-off-by: Alan Cox <alan@linux.intel.com>
---
drivers/usb/class/cdc-acm.c | 1 -
1 files changed, 0 insertions(+), 1 deletions(-)
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 5155ff2..95a18e5 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -428,7 +428,6 @@ next_buffer:
throttled = acm->throttle;
spin_unlock_irqrestore(&acm->throttle_lock, flags);
if (!throttled) {
- tty_buffer_request_room(tty, buf->size);
tty_insert_flip_string(tty, buf->base, buf->size);
tty_flip_buffer_push(tty);
} else {
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH 6/6] tty: Fix up char drivers request_room usage
2010-02-18 16:43 [PATCH 0/6] Clean up tty buffering v page allocation Alan Cox
` (4 preceding siblings ...)
2010-02-18 16:44 ` [PATCH 5/6] tty: kill request_room for USB ACM class Alan Cox
@ 2010-02-18 16:44 ` Alan Cox
5 siblings, 0 replies; 7+ messages in thread
From: Alan Cox @ 2010-02-18 16:44 UTC (permalink / raw)
To: greg, linux-serial
We can't change them all but quite a few misuse it.
Signed-off-by: Alan Cox <alan@linux.intel.com>
---
drivers/char/nozomi.c | 2 --
drivers/char/serial167.c | 3 +--
drivers/char/specialix.c | 2 --
drivers/serial/icom.c | 1 -
drivers/serial/ioc3_serial.c | 3 +--
5 files changed, 2 insertions(+), 9 deletions(-)
diff --git a/drivers/char/nozomi.c b/drivers/char/nozomi.c
index 584910f..a3f32a1 100644
--- a/drivers/char/nozomi.c
+++ b/drivers/char/nozomi.c
@@ -853,8 +853,6 @@ static int receive_data(enum port_type index, struct nozomi *dc)
goto put;
}
- tty_buffer_request_room(tty, size);
-
while (size > 0) {
read_mem32((u32 *) buf, addr + offset, RECEIVE_BUF_MAX);
diff --git a/drivers/char/serial167.c b/drivers/char/serial167.c
index aee3c0d..1ec3d5c 100644
--- a/drivers/char/serial167.c
+++ b/drivers/char/serial167.c
@@ -658,8 +658,7 @@ static irqreturn_t cd2401_rx_interrupt(int irq, void *dev_id)
info->mon.char_max = char_count;
info->mon.char_last = char_count;
#endif
- len = tty_buffer_request_room(tty, char_count);
- while (len--) {
+ while (char_count--) {
data = base_addr[CyRDR];
tty_insert_flip_char(tty, data, TTY_NORMAL);
#ifdef CYCLOM_16Y_HACK
diff --git a/drivers/char/specialix.c b/drivers/char/specialix.c
index 268e17f..07ac14d 100644
--- a/drivers/char/specialix.c
+++ b/drivers/char/specialix.c
@@ -646,8 +646,6 @@ static void sx_receive(struct specialix_board *bp)
dprintk(SX_DEBUG_RX, "port: %p: count: %d\n", port, count);
port->hits[count > 8 ? 9 : count]++;
- tty_buffer_request_room(tty, count);
-
while (count--)
tty_insert_flip_char(tty, sx_in(bp, CD186x_RDR), TTY_NORMAL);
tty_flip_buffer_push(tty);
diff --git a/drivers/serial/icom.c b/drivers/serial/icom.c
index 6e715b7..53a4682 100644
--- a/drivers/serial/icom.c
+++ b/drivers/serial/icom.c
@@ -751,7 +751,6 @@ static void recv_interrupt(u16 port_int_reg, struct icom_port *icom_port)
trace(icom_port, "FID_STATUS", status);
count = cpu_to_le16(icom_port->statStg->rcv[rcv_buff].leLength);
- count = tty_buffer_request_room(tty, count);
trace(icom_port, "RCV_COUNT", count);
trace(icom_port, "REAL_COUNT", count);
diff --git a/drivers/serial/ioc3_serial.c b/drivers/serial/ioc3_serial.c
index 85dc041..23ba6b4 100644
--- a/drivers/serial/ioc3_serial.c
+++ b/drivers/serial/ioc3_serial.c
@@ -1411,8 +1411,7 @@ static int receive_chars(struct uart_port *the_port)
read_count = do_read(the_port, ch, MAX_CHARS);
if (read_count > 0) {
flip = 1;
- read_room = tty_buffer_request_room(tty, read_count);
- tty_insert_flip_string(tty, ch, read_room);
+ read_room = tty_insert_flip_string(tty, ch, read_count);
the_port->icount.rx += read_count;
}
spin_unlock_irqrestore(&the_port->lock, pflags);
^ permalink raw reply related [flat|nested] 7+ messages in thread
end of thread, other threads:[~2010-02-18 17:08 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-02-18 16:43 [PATCH 0/6] Clean up tty buffering v page allocation Alan Cox
2010-02-18 16:43 ` [PATCH 1/6] tty: Keep the default buffering to sub-page units Alan Cox
2010-02-18 16:43 ` [PATCH 2/6] tty: Add a function to insert a string of characters with the same flag Alan Cox
2010-02-18 16:44 ` [PATCH 3/6] tty: Prune uses of tty_request_room in the USB layer Alan Cox
2010-02-18 16:44 ` [PATCH 4/6] tty: sort out the request_room handling for whiteheat Alan Cox
2010-02-18 16:44 ` [PATCH 5/6] tty: kill request_room for USB ACM class Alan Cox
2010-02-18 16:44 ` [PATCH 6/6] tty: Fix up char drivers request_room usage Alan Cox
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).