From: Alan Cox <alan@linux.intel.com>
To: linux-serial@vger.kernel.org, linux-kernel@vger.kernel.org,
arnd@arndb.de
Subject: [PATCH 01/20] stallion: prune lock_kernel calls
Date: Wed, 05 May 2010 11:01:45 +0100 [thread overview]
Message-ID: <20100505100144.3595.65633.stgit@localhost.localdomain> (raw)
Remove unneeded tty layer lock kernel bits. Relock the needed bits using the
port mutex. The istallion still has brd state races but those are not new
or introduced by the removal of the lock_kernel logic.
Signed-off-by: Alan Cox <alan@linux.intel.com>
---
drivers/char/istallion.c | 22 +++++++++++++---------
drivers/char/stallion.c | 20 ++++++++++++--------
2 files changed, 25 insertions(+), 17 deletions(-)
diff --git a/drivers/char/istallion.c b/drivers/char/istallion.c
index 4e395c9..750650c 100644
--- a/drivers/char/istallion.c
+++ b/drivers/char/istallion.c
@@ -14,6 +14,7 @@
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
+ * FIXME: brdp->state needs proper locking.
*/
/*****************************************************************************/
@@ -4011,6 +4012,7 @@ static int stli_getbrdstats(combrd_t __user *bp)
return -ENODEV;
memset(&stli_brdstats, 0, sizeof(combrd_t));
+
stli_brdstats.brd = brdp->brdnr;
stli_brdstats.type = brdp->brdtype;
stli_brdstats.hwid = 0;
@@ -4076,10 +4078,13 @@ static int stli_portcmdstats(struct tty_struct *tty, struct stliport *portp)
if (brdp == NULL)
return -ENODEV;
+ mutex_lock(&portp->port.mutex);
if (brdp->state & BST_STARTED) {
if ((rc = stli_cmdwait(brdp, portp, A_GETSTATS,
- &stli_cdkstats, sizeof(asystats_t), 1)) < 0)
+ &stli_cdkstats, sizeof(asystats_t), 1)) < 0) {
+ mutex_unlock(&portp->port.mutex);
return rc;
+ }
} else {
memset(&stli_cdkstats, 0, sizeof(asystats_t));
}
@@ -4124,6 +4129,7 @@ static int stli_portcmdstats(struct tty_struct *tty, struct stliport *portp)
stli_comstats.modem = stli_cdkstats.dcdcnt;
stli_comstats.hwid = stli_cdkstats.hwid;
stli_comstats.signals = stli_mktiocm(stli_cdkstats.signals);
+ mutex_unlock(&portp->port.mutex);
return 0;
}
@@ -4186,15 +4192,20 @@ static int stli_clrportstats(struct stliport *portp, comstats_t __user *cp)
if (!brdp)
return -ENODEV;
+ mutex_lock(&portp->port.mutex);
+
if (brdp->state & BST_STARTED) {
- if ((rc = stli_cmdwait(brdp, portp, A_CLEARSTATS, NULL, 0, 0)) < 0)
+ if ((rc = stli_cmdwait(brdp, portp, A_CLEARSTATS, NULL, 0, 0)) < 0) {
+ mutex_unlock(&portp->port.mutex);
return rc;
+ }
}
memset(&stli_comstats, 0, sizeof(comstats_t));
stli_comstats.brd = portp->brdnr;
stli_comstats.panel = portp->panelnr;
stli_comstats.port = portp->portnr;
+ mutex_unlock(&portp->port.mutex);
if (copy_to_user(cp, &stli_comstats, sizeof(comstats_t)))
return -EFAULT;
@@ -4266,8 +4277,6 @@ static long stli_memioctl(struct file *fp, unsigned int cmd, unsigned long arg)
done = 0;
rc = 0;
- lock_kernel();
-
switch (cmd) {
case COM_GETPORTSTATS:
rc = stli_getportstats(NULL, NULL, argp);
@@ -4290,8 +4299,6 @@ static long stli_memioctl(struct file *fp, unsigned int cmd, unsigned long arg)
done++;
break;
}
- unlock_kernel();
-
if (done)
return rc;
@@ -4308,8 +4315,6 @@ static long stli_memioctl(struct file *fp, unsigned int cmd, unsigned long arg)
if (brdp->state == 0)
return -ENODEV;
- lock_kernel();
-
switch (cmd) {
case STL_BINTR:
EBRDINTR(brdp);
@@ -4332,7 +4337,6 @@ static long stli_memioctl(struct file *fp, unsigned int cmd, unsigned long arg)
rc = -ENOIOCTLCMD;
break;
}
- unlock_kernel();
return rc;
}
diff --git a/drivers/char/stallion.c b/drivers/char/stallion.c
index 6049fd7..f2167f8 100644
--- a/drivers/char/stallion.c
+++ b/drivers/char/stallion.c
@@ -807,7 +807,6 @@ static void stl_waituntilsent(struct tty_struct *tty, int timeout)
timeout = HZ;
tend = jiffies + timeout;
- lock_kernel();
while (stl_datastate(portp)) {
if (signal_pending(current))
break;
@@ -815,7 +814,6 @@ static void stl_waituntilsent(struct tty_struct *tty, int timeout)
if (time_after_eq(jiffies, tend))
break;
}
- unlock_kernel();
}
/*****************************************************************************/
@@ -1029,6 +1027,8 @@ static int stl_getserial(struct stlport *portp, struct serial_struct __user *sp)
pr_debug("stl_getserial(portp=%p,sp=%p)\n", portp, sp);
memset(&sio, 0, sizeof(struct serial_struct));
+
+ mutex_lock(&portp->port.mutex);
sio.line = portp->portnr;
sio.port = portp->ioaddr;
sio.flags = portp->port.flags;
@@ -1048,6 +1048,7 @@ static int stl_getserial(struct stlport *portp, struct serial_struct __user *sp)
brdp = stl_brds[portp->brdnr];
if (brdp != NULL)
sio.irq = brdp->irq;
+ mutex_unlock(&portp->port.mutex);
return copy_to_user(sp, &sio, sizeof(struct serial_struct)) ? -EFAULT : 0;
}
@@ -1069,12 +1070,15 @@ static int stl_setserial(struct tty_struct *tty, struct serial_struct __user *sp
if (copy_from_user(&sio, sp, sizeof(struct serial_struct)))
return -EFAULT;
+ mutex_lock(&portp->port.mutex);
if (!capable(CAP_SYS_ADMIN)) {
if ((sio.baud_base != portp->baud_base) ||
(sio.close_delay != portp->close_delay) ||
((sio.flags & ~ASYNC_USR_MASK) !=
- (portp->port.flags & ~ASYNC_USR_MASK)))
+ (portp->port.flags & ~ASYNC_USR_MASK))) {
+ mutex_unlock(&portp->port.mutex);
return -EPERM;
+ }
}
portp->port.flags = (portp->port.flags & ~ASYNC_USR_MASK) |
@@ -1083,6 +1087,7 @@ static int stl_setserial(struct tty_struct *tty, struct serial_struct __user *sp
portp->close_delay = sio.close_delay;
portp->closing_wait = sio.closing_wait;
portp->custom_divisor = sio.custom_divisor;
+ mutex_unlock(&portp->port.mutex);
stl_setport(portp, tty->termios);
return 0;
}
@@ -1147,8 +1152,6 @@ static int stl_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd
rc = 0;
- lock_kernel();
-
switch (cmd) {
case TIOCGSERIAL:
rc = stl_getserial(portp, argp);
@@ -1173,7 +1176,6 @@ static int stl_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd
rc = -ENOIOCTLCMD;
break;
}
- unlock_kernel();
return rc;
}
@@ -2327,6 +2329,7 @@ static int stl_getportstats(struct tty_struct *tty, struct stlport *portp, comst
return -ENODEV;
}
+ mutex_lock(&portp->port.mutex);
portp->stats.state = portp->istate;
portp->stats.flags = portp->port.flags;
portp->stats.hwid = portp->hwid;
@@ -2358,6 +2361,7 @@ static int stl_getportstats(struct tty_struct *tty, struct stlport *portp, comst
(STL_TXBUFSIZE - (tail - head));
portp->stats.signals = (unsigned long) stl_getsignals(portp);
+ mutex_unlock(&portp->port.mutex);
return copy_to_user(cp, &portp->stats,
sizeof(comstats_t)) ? -EFAULT : 0;
@@ -2382,10 +2386,12 @@ static int stl_clrportstats(struct stlport *portp, comstats_t __user *cp)
return -ENODEV;
}
+ mutex_lock(&portp->port.mutex);
memset(&portp->stats, 0, sizeof(comstats_t));
portp->stats.brd = portp->brdnr;
portp->stats.panel = portp->panelnr;
portp->stats.port = portp->portnr;
+ mutex_unlock(&portp->port.mutex);
return copy_to_user(cp, &portp->stats,
sizeof(comstats_t)) ? -EFAULT : 0;
}
@@ -2451,7 +2457,6 @@ static long stl_memioctl(struct file *fp, unsigned int cmd, unsigned long arg)
return -ENODEV;
rc = 0;
- lock_kernel();
switch (cmd) {
case COM_GETPORTSTATS:
rc = stl_getportstats(NULL, NULL, argp);
@@ -2472,7 +2477,6 @@ static long stl_memioctl(struct file *fp, unsigned int cmd, unsigned long arg)
rc = -ENOIOCTLCMD;
break;
}
- unlock_kernel();
return rc;
}
next reply other threads:[~2010-05-05 10:40 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-05-05 10:01 Alan Cox [this message]
2010-05-05 10:01 ` [PATCH 02/20] istallion: use bit ops for the board flags Alan Cox
2010-05-05 10:01 ` [PATCH 03/20] riscom8: kill use of lock_kernel Alan Cox
2010-05-05 10:02 ` [PATCH 04/20] isicom: kill off the BKL Alan Cox
2010-05-05 10:02 ` [PATCH 05/20] rocket: kill BKL Alan Cox
2010-05-05 10:02 ` [PATCH 06/20] synclink: kill the big kernel lock Alan Cox
2010-05-05 10:02 ` [PATCH 07/20] cyclades: Kill off BKL usage Alan Cox
2010-05-05 10:02 ` [PATCH 08/20] epca: Kill the big kernel lock Alan Cox
2010-05-05 10:02 ` [PATCH 09/20] specialix; Kill the BKL Alan Cox
2010-05-05 10:02 ` [PATCH 10/20] synclink: reworking locking a bit Alan Cox
2010-05-05 10:02 ` [PATCH 11/20] tty: serial - fix various misuses/mishandlings of port->tty Alan Cox
2010-05-05 10:02 ` [PATCH 12/20] tty: serial - fix tty back references in termios Alan Cox
2010-05-05 10:02 ` [PATCH 13/20] tty: serial - fix tty referencing in set_ldisc Alan Cox
2010-05-05 10:02 ` [PATCH 14/20] vc: Locking clean up Alan Cox
2010-05-05 10:03 ` [PATCH 15/20] tty: Make vt's have a tty_port Alan Cox
2010-05-05 10:03 ` [PATCH 16/20] tty: Move the vt_tty field from the vc_data into the standard tty_port Alan Cox
2010-05-05 10:03 ` [PATCH 17/20] serial: Change the wait for carrier locking Alan Cox
2010-05-05 10:03 ` [PATCH 18/20] serial: add port helpers Alan Cox
2010-05-05 10:03 ` [PATCH 19/20] serial: trim locking on the helpers Alan Cox
2010-05-05 10:03 ` [PATCH 20/20] serial: Use block_til_ready helper Alan Cox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100505100144.3595.65633.stgit@localhost.localdomain \
--to=alan@linux.intel.com \
--cc=arnd@arndb.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).