linux-serial.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Alan Cox <alan@linux.intel.com>
To: linux-serial@vger.kernel.org, linux-kernel@vger.kernel.org,
	arnd@arndb.de
Subject: [PATCH 07/20] cyclades: Kill off BKL usage
Date: Wed, 05 May 2010 11:02:19 +0100	[thread overview]
Message-ID: <20100505100219.3595.34607.stgit@localhost.localdomain> (raw)
In-Reply-To: <20100505100144.3595.65633.stgit@localhost.localdomain>

Use the port mutext for config setting, the rest is locked sufficiently
anyway that the BKL makes no odds.

Signed-off-by: Alan Cox <alan@linux.intel.com>
---

 drivers/char/cyclades.c |   20 +++++++++-----------
 1 files changed, 9 insertions(+), 11 deletions(-)


diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c
index 9824b41..51acfe3 100644
--- a/drivers/char/cyclades.c
+++ b/drivers/char/cyclades.c
@@ -65,7 +65,6 @@
 #include <linux/tty.h>
 #include <linux/tty_flip.h>
 #include <linux/serial.h>
-#include <linux/smp_lock.h>
 #include <linux/major.h>
 #include <linux/string.h>
 #include <linux/fcntl.h>
@@ -1655,7 +1654,6 @@ static void cy_wait_until_sent(struct tty_struct *tty, int timeout)
 		return;		/* Just in case.... */
 
 	orig_jiffies = jiffies;
-	lock_kernel();
 	/*
 	 * Set the check interval to be 1/5 of the estimated time to
 	 * send a single character, and make it at least 1.  The check
@@ -1702,7 +1700,6 @@ static void cy_wait_until_sent(struct tty_struct *tty, int timeout)
 	}
 	/* Run one more char cycle */
 	msleep_interruptible(jiffies_to_msecs(char_time * 5));
-	unlock_kernel();
 #ifdef CY_DEBUG_WAIT_UNTIL_SENT
 	printk(KERN_DEBUG "Clean (jiff=%lu)...done\n", jiffies);
 #endif
@@ -1959,7 +1956,6 @@ static int cy_chars_in_buffer(struct tty_struct *tty)
 		int char_count;
 		__u32 tx_put, tx_get, tx_bufsize;
 
-		lock_kernel();
 		tx_get = readl(&buf_ctrl->tx_get);
 		tx_put = readl(&buf_ctrl->tx_put);
 		tx_bufsize = readl(&buf_ctrl->tx_bufsize);
@@ -1971,7 +1967,6 @@ static int cy_chars_in_buffer(struct tty_struct *tty)
 		printk(KERN_DEBUG "cyc:cy_chars_in_buffer ttyC%d %d\n",
 			info->line, info->xmit_cnt + char_count);
 #endif
-		unlock_kernel();
 		return info->xmit_cnt + char_count;
 	}
 #endif				/* Z_EXT_CHARS_IN_BUFFER */
@@ -2359,17 +2354,22 @@ cy_set_serial_info(struct cyclades_port *info, struct tty_struct *tty,
 		struct serial_struct __user *new_info)
 {
 	struct serial_struct new_serial;
+	int ret;
 
 	if (copy_from_user(&new_serial, new_info, sizeof(new_serial)))
 		return -EFAULT;
 
+	mutex_lock(&info->port.mutex);
 	if (!capable(CAP_SYS_ADMIN)) {
 		if (new_serial.close_delay != info->port.close_delay ||
 				new_serial.baud_base != info->baud ||
 				(new_serial.flags & ASYNC_FLAGS &
 					~ASYNC_USR_MASK) !=
 				(info->port.flags & ASYNC_FLAGS & ~ASYNC_USR_MASK))
+		{
+			mutex_unlock(&info->port.mutex);
 			return -EPERM;
+		}
 		info->port.flags = (info->port.flags & ~ASYNC_USR_MASK) |
 				(new_serial.flags & ASYNC_USR_MASK);
 		info->baud = new_serial.baud_base;
@@ -2392,10 +2392,12 @@ cy_set_serial_info(struct cyclades_port *info, struct tty_struct *tty,
 check_and_exit:
 	if (info->port.flags & ASYNC_INITIALIZED) {
 		cy_set_line_char(info, tty);
-		return 0;
+		ret = 0;
 	} else {
-		return cy_startup(info, tty);
+		ret = cy_startup(info, tty);
 	}
+	mutex_unlock(&info->port.mutex);
+	return ret;
 }				/* set_serial_info */
 
 /*
@@ -2438,7 +2440,6 @@ static int cy_tiocmget(struct tty_struct *tty, struct file *file)
 
 	card = info->card;
 
-	lock_kernel();
 	if (!cy_is_Z(card)) {
 		unsigned long flags;
 		int channel = info->line - card->first_line;
@@ -2478,7 +2479,6 @@ static int cy_tiocmget(struct tty_struct *tty, struct file *file)
 			((lstatus & C_RS_CTS) ? TIOCM_CTS : 0);
 	}
 end:
-	unlock_kernel();
 	return result;
 }				/* cy_tiomget */
 
@@ -2696,7 +2696,6 @@ cy_ioctl(struct tty_struct *tty, struct file *file,
 	printk(KERN_DEBUG "cyc:cy_ioctl ttyC%d, cmd = %x arg = %lx\n",
 		info->line, cmd, arg);
 #endif
-	lock_kernel();
 
 	switch (cmd) {
 	case CYGETMON:
@@ -2817,7 +2816,6 @@ cy_ioctl(struct tty_struct *tty, struct file *file,
 	default:
 		ret_val = -ENOIOCTLCMD;
 	}
-	unlock_kernel();
 
 #ifdef CY_DEBUG_OTHER
 	printk(KERN_DEBUG "cyc:cy_ioctl done\n");

  parent reply	other threads:[~2010-05-05 10:02 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-05-05 10:01 [PATCH 01/20] stallion: prune lock_kernel calls Alan Cox
2010-05-05 10:01 ` [PATCH 02/20] istallion: use bit ops for the board flags Alan Cox
2010-05-05 10:01 ` [PATCH 03/20] riscom8: kill use of lock_kernel Alan Cox
2010-05-05 10:02 ` [PATCH 04/20] isicom: kill off the BKL Alan Cox
2010-05-05 10:02 ` [PATCH 05/20] rocket: kill BKL Alan Cox
2010-05-05 10:02 ` [PATCH 06/20] synclink: kill the big kernel lock Alan Cox
2010-05-05 10:02 ` Alan Cox [this message]
2010-05-05 10:02 ` [PATCH 08/20] epca: Kill " Alan Cox
2010-05-05 10:02 ` [PATCH 09/20] specialix; Kill the BKL Alan Cox
2010-05-05 10:02 ` [PATCH 10/20] synclink: reworking locking a bit Alan Cox
2010-05-05 10:02 ` [PATCH 11/20] tty: serial - fix various misuses/mishandlings of port->tty Alan Cox
2010-05-05 10:02 ` [PATCH 12/20] tty: serial - fix tty back references in termios Alan Cox
2010-05-05 10:02 ` [PATCH 13/20] tty: serial - fix tty referencing in set_ldisc Alan Cox
2010-05-05 10:02 ` [PATCH 14/20] vc: Locking clean up Alan Cox
2010-05-05 10:03 ` [PATCH 15/20] tty: Make vt's have a tty_port Alan Cox
2010-05-05 10:03 ` [PATCH 16/20] tty: Move the vt_tty field from the vc_data into the standard tty_port Alan Cox
2010-05-05 10:03 ` [PATCH 17/20] serial: Change the wait for carrier locking Alan Cox
2010-05-05 10:03 ` [PATCH 18/20] serial: add port helpers Alan Cox
2010-05-05 10:03 ` [PATCH 19/20] serial: trim locking on the helpers Alan Cox
2010-05-05 10:03 ` [PATCH 20/20] serial: Use block_til_ready helper Alan Cox

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20100505100219.3595.34607.stgit@localhost.localdomain \
    --to=alan@linux.intel.com \
    --cc=arnd@arndb.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-serial@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).