From: Alan Cox <alan@linux.intel.com>
To: greg@kroah.com, linux-serial@vger.kernel.org
Subject: [PATCH 06/11] rocket: kill BKL
Date: Wed, 19 May 2010 13:02:48 +0100 [thread overview]
Message-ID: <20100519120242.16717.43677.stgit@localhost.localdomain> (raw)
In-Reply-To: <20100519120111.16717.71992.stgit@localhost.localdomain>
We can use the port mutex for this and also for the hangup path so removing
the problematic use of the hangup mutex in this driver. Fix up the locking
on the various port flags while we are at it.
Ultimately this driver needs to be using tty_port_ helpers which would sort
this out far better.
Signed-off-by: Alan Cox <alan@linux.intel.com>
---
drivers/char/rocket.c | 28 +++++++++++++++++++---------
1 files changed, 19 insertions(+), 9 deletions(-)
diff --git a/drivers/char/rocket.c b/drivers/char/rocket.c
index 0e29a23..79c3bc6 100644
--- a/drivers/char/rocket.c
+++ b/drivers/char/rocket.c
@@ -73,7 +73,6 @@
#include <linux/tty_driver.h>
#include <linux/tty_flip.h>
#include <linux/serial.h>
-#include <linux/smp_lock.h>
#include <linux/string.h>
#include <linux/fcntl.h>
#include <linux/ptrace.h>
@@ -1017,6 +1016,7 @@ static void rp_close(struct tty_struct *tty, struct file *filp)
if (tty_port_close_start(port, tty, filp) == 0)
return;
+ mutex_lock(&port->mutex);
cp = &info->channel;
/*
* Before we drop DTR, make sure the UART transmitter
@@ -1060,9 +1060,13 @@ static void rp_close(struct tty_struct *tty, struct file *filp)
info->xmit_buf = NULL;
}
}
+ spin_lock_irq(&port->lock);
info->port.flags &= ~(ASYNC_INITIALIZED | ASYNC_CLOSING | ASYNC_NORMAL_ACTIVE);
tty->closing = 0;
+ spin_unlock_irq(&port->lock);
+ mutex_unlock(&port->mutex);
tty_port_tty_set(port, NULL);
+
wake_up_interruptible(&port->close_wait);
complete_all(&info->close_wait);
atomic_dec(&rp_num_ports_open);
@@ -1210,11 +1214,13 @@ static int get_config(struct r_port *info, struct rocket_config __user *retinfo)
if (!retinfo)
return -EFAULT;
memset(&tmp, 0, sizeof (tmp));
+ mutex_lock(&info->port.mutex);
tmp.line = info->line;
tmp.flags = info->flags;
tmp.close_delay = info->port.close_delay;
tmp.closing_wait = info->port.closing_wait;
tmp.port = rcktpt_io_addr[(info->line >> 5) & 3];
+ mutex_unlock(&info->port.mutex);
if (copy_to_user(retinfo, &tmp, sizeof (*retinfo)))
return -EFAULT;
@@ -1229,10 +1235,13 @@ static int set_config(struct tty_struct *tty, struct r_port *info,
if (copy_from_user(&new_serial, new_info, sizeof (new_serial)))
return -EFAULT;
+ mutex_lock(&info->port.mutex);
if (!capable(CAP_SYS_ADMIN))
{
- if ((new_serial.flags & ~ROCKET_USR_MASK) != (info->flags & ~ROCKET_USR_MASK))
+ if ((new_serial.flags & ~ROCKET_USR_MASK) != (info->flags & ~ROCKET_USR_MASK)) {
+ mutex_unlock(&info->port.mutex);
return -EPERM;
+ }
info->flags = ((info->flags & ~ROCKET_USR_MASK) | (new_serial.flags & ROCKET_USR_MASK));
configure_r_port(tty, info, NULL);
return 0;
@@ -1250,6 +1259,7 @@ static int set_config(struct tty_struct *tty, struct r_port *info,
tty->alt_speed = 230400;
if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_WARP)
tty->alt_speed = 460800;
+ mutex_unlock(&info->port.mutex);
configure_r_port(tty, info, NULL);
return 0;
@@ -1325,8 +1335,6 @@ static int rp_ioctl(struct tty_struct *tty, struct file *file,
if (cmd != RCKP_GET_PORTS && rocket_paranoia_check(info, "rp_ioctl"))
return -ENXIO;
- lock_kernel();
-
switch (cmd) {
case RCKP_GET_STRUCT:
if (copy_to_user(argp, info, sizeof (struct r_port)))
@@ -1350,7 +1358,6 @@ static int rp_ioctl(struct tty_struct *tty, struct file *file,
default:
ret = -ENOIOCTLCMD;
}
- unlock_kernel();
return ret;
}
@@ -1471,7 +1478,6 @@ static void rp_wait_until_sent(struct tty_struct *tty, int timeout)
jiffies);
printk(KERN_INFO "cps=%d...\n", info->cps);
#endif
- lock_kernel();
while (1) {
txcnt = sGetTxCnt(cp);
if (!txcnt) {
@@ -1499,7 +1505,6 @@ static void rp_wait_until_sent(struct tty_struct *tty, int timeout)
break;
}
__set_current_state(TASK_RUNNING);
- unlock_kernel();
#ifdef ROCKET_DEBUG_WAIT_UNTIL_SENT
printk(KERN_INFO "txcnt = %d (jiff=%lu)...done\n", txcnt, jiffies);
#endif
@@ -1512,6 +1517,7 @@ static void rp_hangup(struct tty_struct *tty)
{
CHANNEL_t *cp;
struct r_port *info = tty->driver_data;
+ unsigned long flags;
if (rocket_paranoia_check(info, "rp_hangup"))
return;
@@ -1520,11 +1526,15 @@ static void rp_hangup(struct tty_struct *tty)
printk(KERN_INFO "rp_hangup of ttyR%d...\n", info->line);
#endif
rp_flush_buffer(tty);
- if (info->port.flags & ASYNC_CLOSING)
+ spin_lock_irqsave(&info->port.lock, flags);
+ if (info->port.flags & ASYNC_CLOSING) {
+ spin_unlock_irqrestore(&info->port.lock, flags);
return;
+ }
if (info->port.count)
atomic_dec(&rp_num_ports_open);
clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]);
+ spin_unlock_irqrestore(&info->port.lock, flags);
tty_port_hangup(&info->port);
@@ -1535,7 +1545,7 @@ static void rp_hangup(struct tty_struct *tty)
sDisCTSFlowCtl(cp);
sDisTxSoftFlowCtl(cp);
sClrTxXOFF(cp);
- info->port.flags &= ~ASYNC_INITIALIZED;
+ clear_bit(ASYNCB_INITIALIZED, &info->port.flags);
wake_up_interruptible(&info->port.open_wait);
}
next prev parent reply other threads:[~2010-05-19 12:45 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-05-19 12:01 [PATCH 00/11] BKL pruning and serial bug fixing Alan Cox
2010-05-19 12:01 ` [PATCH 01/11] tty: Fix the digi acceleport driver NULL checks Alan Cox
2010-05-19 12:02 ` [PATCH 02/11] stallion: prune lock_kernel calls Alan Cox
2010-05-19 12:02 ` [PATCH 03/11] istallion: use bit ops for the board flags Alan Cox
2010-05-19 12:02 ` [PATCH 04/11] riscom8: kill use of lock_kernel Alan Cox
2010-05-19 12:02 ` [PATCH 05/11] isicom: kill off the BKL Alan Cox
2010-05-19 12:02 ` Alan Cox [this message]
2010-05-19 12:02 ` [PATCH 07/11] synclink: kill the big kernel lock Alan Cox
2010-05-19 12:03 ` [PATCH 08/11] cyclades: Kill off BKL usage Alan Cox
2010-05-19 12:03 ` [PATCH 09/11] epca: Kill the big kernel lock Alan Cox
2010-05-19 12:03 ` [PATCH 10/11] specialix; Kill the BKL Alan Cox
2010-05-19 12:03 ` [PATCH 11/11] synclink: reworking locking a bit Alan Cox
2010-05-20 17:56 ` [PATCH 00/11] BKL pruning and serial bug fixing Greg KH
2010-05-20 18:06 ` Alan Cox
2010-05-20 19:01 ` Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100519120242.16717.43677.stgit@localhost.localdomain \
--to=alan@linux.intel.com \
--cc=greg@kroah.com \
--cc=linux-serial@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).