Re: 2.6.25 upgraded to 2.6.36: serial app stops working

[folkert <folkert@vanheusden.com>]

> > I upgraded my linux system to 2.6.36. Now suddenly my serial driver
> > for
> > my MSF receiver stopped working. Two things I noticed: I need to open
> > the serial device (/dev/ttyS0, a regular uart, see below) with
> > O_NDELAY
> > for open() to return at all. Then something funny happens: I read
> > bytes
> > from the device (at 50bps) which runs fine for a while but then
> > suddenly
> > I get a burst of '0x00' bytes - precisely at the point at which the
> > MSF
> > radio device sends a timecode! So I think the device fiddles with one
> > of
> > the pins of the serial port confusing the linux serial driver. This
> > worked fine upto and including 2.6.25 (maybe later too) but with
> > 2.6.36
> > this fails.
> > Anyone an idea what might go wrong here? And how to fix it?

> Any chance you could use 'git bisect' on the kernel tree to see what
> caused the change?  Moving from .25 to .36 is a huge jump, many many
> years of development and loads of things have changed so we need some
> help to narrow the problem down.

Am looking for a way to do that: the original system has ext4
filesystems so .25 is a bit tricky. An other system (via Csomething)
crashes with .25.


Folkert van Heusden

-- 
Nagios user? Check out CoffeeSaint - the versatile Nagios status
viewer! http://www.vanheusden.com/java/CoffeeSaint/
----------------------------------------------------------------------
Phone: +31-6-41278122, PGP-key: 1F28D8AE, www.vanheusden.com