[PATCH] serial: also set the uartclk value in resume after goes to highspeed

[Yin Kangkai <kangkai.yin@linux.intel.com>]

>From 6f96e25fd4401b152adb9d91ebda0777f3532162 Mon Sep 17 00:00:00 2001
From: Yin Kangkai <kangkai.yin@intel.com>
Date: Mon, 24 Jan 2011 18:45:39 +0800
Subject: [PATCH] serial: also set the uartclk value in resume after goes to highspeed

For any reason if the NS16550A was not work in high speed mode (e.g. we hold
NS16550A from going to high speed mode in autoconfig_16550a()), now we are
resume from suspend, we should also set the uartclk to the correct
value. Otherwise it is still the old 1843200 and that will bring issues.

Signed-off-by: Yin Kangkai <kangkai.yin@intel.com>
---
 drivers/serial/8250.c |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)

diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 3e690da..e928e06 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -2995,6 +2995,7 @@ void serial8250_resume_port(int line)
 		ns16550a_goto_highspeed(up);
 
 		serial_outp(up, UART_LCR, 0);
+		up->port.uartclk = 921600*16;
 	}
 	uart_resume_port(&serial8250_reg, &up->port);
 }
-- 
1.6.5