From mboxrd@z Thu Jan 1 00:00:00 1970 From: Yin Kangkai Subject: [PATCH] serial: also set the uartclk value in resume after goes to highspeed Date: Tue, 25 Jan 2011 15:44:47 +0800 Message-ID: <20110125074447.GJ3315@kai-debian> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Received: from mga09.intel.com ([134.134.136.24]:18971 "EHLO mga09.intel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751768Ab1AYHou (ORCPT ); Tue, 25 Jan 2011 02:44:50 -0500 Content-Disposition: inline Sender: linux-serial-owner@vger.kernel.org List-Id: linux-serial@vger.kernel.org To: linux-serial Cc: Greg Kroah-Hartman , "Woodhouse, David" , linux-kernel@vger.kernel.org >>From 6f96e25fd4401b152adb9d91ebda0777f3532162 Mon Sep 17 00:00:00 2001 From: Yin Kangkai Date: Mon, 24 Jan 2011 18:45:39 +0800 Subject: [PATCH] serial: also set the uartclk value in resume after goes to highspeed For any reason if the NS16550A was not work in high speed mode (e.g. we hold NS16550A from going to high speed mode in autoconfig_16550a()), now we are resume from suspend, we should also set the uartclk to the correct value. Otherwise it is still the old 1843200 and that will bring issues. Signed-off-by: Yin Kangkai --- drivers/serial/8250.c | 1 + 1 files changed, 1 insertions(+), 0 deletions(-) diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index 3e690da..e928e06 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -2995,6 +2995,7 @@ void serial8250_resume_port(int line) ns16550a_goto_highspeed(up); serial_outp(up, UART_LCR, 0); + up->port.uartclk = 921600*16; } uart_resume_port(&serial8250_reg, &up->port); } -- 1.6.5