From mboxrd@z Thu Jan 1 00:00:00 1970 From: Johan Hovold Subject: Re: USB to Serial converter code pl2303 Date: Thu, 20 Feb 2014 21:02:50 +0100 Message-ID: <20140220200250.GB16785@localhost> References: <1392688665.7323.32.camel@mange> <20140218090946.GA1954@localhost> <1392828260.3113.24.camel@mange> <20140219170039.GG24335@localhost> <5304E472.2000203@dct.mine.nu> <20140219171406.GH24335@localhost> <53064721.3080905@googlemail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: Content-Disposition: inline In-Reply-To: <53064721.3080905-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org> Sender: linux-usb-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Frank =?iso-8859-1?Q?Sch=E4fer?= Cc: Johan Hovold , Karsten Malcher , Magnus , linux-serial-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: linux-serial@vger.kernel.org On Thu, Feb 20, 2014 at 07:19:13PM +0100, Frank Sch=E4fer wrote: > Am 19.02.2014 18:14, schrieb Johan Hovold: > > What driver is that? The latest clone-related patch from Frank that= I've > > seen stated: > > > > "According to Prolific, several (unauthorized) cheap and less > > functional clones of the PL2303HX chip are in circulation. [1] > > I've had the chance to test such a cloned device and it turned > > out that it doesn't support any baud rates above 115200 baud > > (original: 6 Mbaud) It also doesn't support the divisior based > > baud rate encoding method, so no continuous baud rate adjustment > > is possible." > This patch is still 100% valid. > The "good" clones are detected as originals, which is fine. Good to know. Thanks for clarifying. Care to respin your refined-device-detection patches against the update= d driver in v3.14-rc? Thanks, Johan -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html