From: Jean Delvare <jdelvare@suse.de>
To: linux-serial@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Jiri Slaby <jslaby@suse.cz>
Subject: [PATCH] serial: pch_uart: Fix Kconfig dependencies
Date: Fri, 16 May 2014 10:48:50 +0200 [thread overview]
Message-ID: <20140516104850.12c30fb4@endymion.delvare> (raw)
The pch_uart driver is for a companion chip to the Intel Atom E600
series processors. These are 32-bit x86 processors so the driver is
only needed on X86_32. Add COMPILE_TEST as an alternative, so that the
driver can still be build-tested elsewhere.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.cz>
---
drivers/tty/serial/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- linux-3.15-rc5.orig/drivers/tty/serial/Kconfig 2014-04-22 14:43:58.025637639 +0200
+++ linux-3.15-rc5/drivers/tty/serial/Kconfig 2014-05-16 10:41:03.629069889 +0200
@@ -1323,7 +1323,7 @@ config SERIAL_IFX6X60
config SERIAL_PCH_UART
tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) UART"
- depends on PCI
+ depends on PCI && (X86_32 || COMPILE_TEST)
select SERIAL_CORE
help
This driver is for PCH(Platform controller Hub) UART of Intel EG20T
--
Jean Delvare
SUSE L3 Support
reply other threads:[~2014-05-16 8:48 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140516104850.12c30fb4@endymion.delvare \
--to=jdelvare@suse.de \
--cc=gregkh@linuxfoundation.org \
--cc=jslaby@suse.cz \
--cc=linux-serial@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox