Re: [PATCH 09/22] clk: sunxi: Implement A31 PLL6 as a divs clock for 2x output

[Maxime Ripard <maxime.ripard@free-electrons.com>]

[-- Attachment #1.1: Type: text/plain, Size: 2704 bytes --]

On Fri, May 23, 2014 at 03:51:12PM +0800, Chen-Yu Tsai wrote:
> Some clock modules on the A31 use PLL6x2 as one of their inputs.
> This patch changes the PLL6 implementation for A31 to a divs clock,
> i.e. clock with multiple outputs that have different dividers.
> 
> This behavior is consistent with previous SoC's by Allwinner.
> 
> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
> ---
>  drivers/clk/sunxi/clk-sunxi.c | 11 ++++++++++-
>  1 file changed, 10 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c
> index 6857c6e..339cabc 100644
> --- a/drivers/clk/sunxi/clk-sunxi.c
> +++ b/drivers/clk/sunxi/clk-sunxi.c
> @@ -496,6 +496,7 @@ static const struct factors_data sun6i_a31_pll6_data __initconst = {
>  	.enable = 31,
>  	.table = &sun6i_a31_pll6_config,
>  	.getter = sun6i_a31_get_pll6_factors,
> +	.name = "pll6",
>  };
>  
>  static const struct factors_data sun4i_apb1_data __initconst = {
> @@ -969,6 +970,14 @@ static const struct divs_data pll6_divs_data __initconst = {
>  	}
>  };
>  
> +static const struct divs_data sun6i_a31_pll6_divs_data __initconst = {
> +	.factors = &sun6i_a31_pll6_data,
> +	.ndivs = 1,
> +	.div = {
> +		{ .fixed = 2 }, /* P, other */
> +	}
> +};
> +
>  /**
>   * sunxi_divs_clk_setup() - Setup function for leaf divisors on clocks
>   *
> @@ -1108,7 +1117,6 @@ static const struct of_device_id clk_factors_match[] __initconst = {
>  	{.compatible = "allwinner,sun4i-a10-pll1-clk", .data = &sun4i_pll1_data,},
>  	{.compatible = "allwinner,sun6i-a31-pll1-clk", .data = &sun6i_a31_pll1_data,},
>  	{.compatible = "allwinner,sun7i-a20-pll4-clk", .data = &sun7i_a20_pll4_data,},
> -	{.compatible = "allwinner,sun6i-a31-pll6-clk", .data = &sun6i_a31_pll6_data,},
>  	{.compatible = "allwinner,sun4i-a10-apb1-clk", .data = &sun4i_apb1_data,},
>  	{.compatible = "allwinner,sun4i-a10-mod0-clk", .data = &sun4i_mod0_data,},
>  	{.compatible = "allwinner,sun7i-a20-out-clk", .data = &sun7i_a20_out_data,},
> @@ -1128,6 +1136,7 @@ static const struct of_device_id clk_div_match[] __initconst = {
>  static const struct of_device_id clk_divs_match[] __initconst = {
>  	{.compatible = "allwinner,sun4i-a10-pll5-clk", .data = &pll5_divs_data,},
>  	{.compatible = "allwinner,sun4i-a10-pll6-clk", .data = &pll6_divs_data,},
> +	{.compatible = "allwinner,sun6i-a31-pll6-clk", .data = &sun6i_a31_pll6_divs_data,},

Can't the PLL6x2 clock just be a fixed-factor-clock? It would make the
change trivial, and better fit what it actually is.

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

[-- Attachment #1.2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel