* [PATCH RFC] tty, serial, 8250: remove __init from function serial8250_console_setup()
@ 2014-11-20 18:00 Arianna Avanzini
2014-11-25 17:51 ` Greg KH
0 siblings, 1 reply; 6+ messages in thread
From: Arianna Avanzini @ 2014-11-20 18:00 UTC (permalink / raw)
To: gregkh, jslaby, linux-kernel, linux-serial; +Cc: avanzini.arianna
Some RS232 adapters handled by this driver are hotpluggable. The function
serial8250_console_setup() is called during device init and is defined with
the __init macro. In case the driver is built-in, hotplugging the device after
the initialization phase has been completed (and the related memory has been
freed) results in a kernel crash.
This commit fixes the issue by removing __init from the function definition.
Signed-off-by: Arianna Avanzini <avanzini.arianna@gmail.com>
---
drivers/tty/serial/8250/8250_core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index ca5cfdc..ca8108d 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -3237,7 +3237,7 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count)
serial8250_rpm_put(up);
}
-static int __init serial8250_console_setup(struct console *co, char *options)
+static int serial8250_console_setup(struct console *co, char *options)
{
struct uart_port *port;
int baud = 9600;
--
2.1.3
^ permalink raw reply related [flat|nested] 6+ messages in thread* Re: [PATCH RFC] tty, serial, 8250: remove __init from function serial8250_console_setup()
2014-11-20 18:00 [PATCH RFC] tty, serial, 8250: remove __init from function serial8250_console_setup() Arianna Avanzini
@ 2014-11-25 17:51 ` Greg KH
2014-11-25 22:18 ` Arianna Avanzini
2014-11-25 22:21 ` [PATCH] " Arianna Avanzini
0 siblings, 2 replies; 6+ messages in thread
From: Greg KH @ 2014-11-25 17:51 UTC (permalink / raw)
To: Arianna Avanzini; +Cc: jslaby, linux-kernel, linux-serial
On Thu, Nov 20, 2014 at 07:00:56PM +0100, Arianna Avanzini wrote:
> Some RS232 adapters handled by this driver are hotpluggable. The function
> serial8250_console_setup() is called during device init and is defined with
> the __init macro. In case the driver is built-in, hotplugging the device after
> the initialization phase has been completed (and the related memory has been
> freed) results in a kernel crash.
> This commit fixes the issue by removing __init from the function definition.
>
> Signed-off-by: Arianna Avanzini <avanzini.arianna@gmail.com>
> ---
> drivers/tty/serial/8250/8250_core.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
> index ca5cfdc..ca8108d 100644
> --- a/drivers/tty/serial/8250/8250_core.c
> +++ b/drivers/tty/serial/8250/8250_core.c
> @@ -3237,7 +3237,7 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count)
> serial8250_rpm_put(up);
> }
>
> -static int __init serial8250_console_setup(struct console *co, char *options)
> +static int serial8250_console_setup(struct console *co, char *options)
> {
> struct uart_port *port;
> int baud = 9600;
> --
> 2.1.3
I don't apply "RFC" patches as it implies you don't even know if this
works or not.
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PATCH RFC] tty, serial, 8250: remove __init from function serial8250_console_setup()
2014-11-25 17:51 ` Greg KH
@ 2014-11-25 22:18 ` Arianna Avanzini
2014-11-25 22:21 ` [PATCH] " Arianna Avanzini
1 sibling, 0 replies; 6+ messages in thread
From: Arianna Avanzini @ 2014-11-25 22:18 UTC (permalink / raw)
To: Greg KH; +Cc: jslaby, linux-kernel, linux-serial
On Tue, Nov 25, 2014 at 09:51:21AM -0800, Greg KH wrote:
> On Thu, Nov 20, 2014 at 07:00:56PM +0100, Arianna Avanzini wrote:
> > Some RS232 adapters handled by this driver are hotpluggable. The function
> > serial8250_console_setup() is called during device init and is defined with
> > the __init macro. In case the driver is built-in, hotplugging the device after
> > the initialization phase has been completed (and the related memory has been
> > freed) results in a kernel crash.
> > This commit fixes the issue by removing __init from the function definition.
> >
> > Signed-off-by: Arianna Avanzini <avanzini.arianna@gmail.com>
> > ---
> > drivers/tty/serial/8250/8250_core.c | 2 +-
> > 1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
> > index ca5cfdc..ca8108d 100644
> > --- a/drivers/tty/serial/8250/8250_core.c
> > +++ b/drivers/tty/serial/8250/8250_core.c
> > @@ -3237,7 +3237,7 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count)
> > serial8250_rpm_put(up);
> > }
> >
> > -static int __init serial8250_console_setup(struct console *co, char *options)
> > +static int serial8250_console_setup(struct console *co, char *options)
> > {
> > struct uart_port *port;
> > int baud = 9600;
> > --
> > 2.1.3
>
> I don't apply "RFC" patches as it implies you don't even know if this
> works or not.
I was not aware of the fact that the "RFC" tag had such an implication; thank
you for pointing that out. As I have already tested the patch and it appears to
be effective, I'll resend it and drop the "RFC" tag.
Thank you,
Arianna
--
/*
* Arianna Avanzini
* avanzini.arianna@gmail.com
* http://ava.webhop.me
*/
^ permalink raw reply [flat|nested] 6+ messages in thread* [PATCH] tty, serial, 8250: remove __init from function serial8250_console_setup()
2014-11-25 17:51 ` Greg KH
2014-11-25 22:18 ` Arianna Avanzini
@ 2014-11-25 22:21 ` Arianna Avanzini
2014-11-26 14:25 ` Peter Hurley
2014-11-26 17:26 ` Greg KH
1 sibling, 2 replies; 6+ messages in thread
From: Arianna Avanzini @ 2014-11-25 22:21 UTC (permalink / raw)
To: gregkh, jslaby, linux-kernel, linux-serial; +Cc: avanzini.arianna
Some RS232 adapters handled by this driver are hotpluggable. The function
serial8250_console_setup() is called during device init and is defined with
the __init macro. In case the driver is built-in, hotplugging the device after
the initialization phase has been completed (and the related memory has been
freed) results in a kernel crash.
This commit fixes the issue by removing __init from the function definition.
Signed-off-by: Arianna Avanzini <avanzini.arianna@gmail.com>
---
drivers/tty/serial/8250/8250_core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index ca5cfdc..ca8108d 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -3237,7 +3237,7 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count)
serial8250_rpm_put(up);
}
-static int __init serial8250_console_setup(struct console *co, char *options)
+static int serial8250_console_setup(struct console *co, char *options)
{
struct uart_port *port;
int baud = 9600;
--
2.1.3
^ permalink raw reply related [flat|nested] 6+ messages in thread* Re: [PATCH] tty, serial, 8250: remove __init from function serial8250_console_setup()
2014-11-25 22:21 ` [PATCH] " Arianna Avanzini
@ 2014-11-26 14:25 ` Peter Hurley
2014-11-26 17:26 ` Greg KH
1 sibling, 0 replies; 6+ messages in thread
From: Peter Hurley @ 2014-11-26 14:25 UTC (permalink / raw)
To: Arianna Avanzini, gregkh; +Cc: jslaby, linux-kernel, linux-serial
On 11/25/2014 05:21 PM, Arianna Avanzini wrote:
> Some RS232 adapters handled by this driver are hotpluggable. The function
> serial8250_console_setup() is called during device init and is defined with
> the __init macro. In case the driver is built-in, hotplugging the device after
> the initialization phase has been completed (and the related memory has been
> freed) results in a kernel crash.
> This commit fixes the issue by removing __init from the function definition.
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] tty, serial, 8250: remove __init from function serial8250_console_setup()
2014-11-25 22:21 ` [PATCH] " Arianna Avanzini
2014-11-26 14:25 ` Peter Hurley
@ 2014-11-26 17:26 ` Greg KH
1 sibling, 0 replies; 6+ messages in thread
From: Greg KH @ 2014-11-26 17:26 UTC (permalink / raw)
To: Arianna Avanzini; +Cc: jslaby, linux-kernel, linux-serial
On Tue, Nov 25, 2014 at 11:21:22PM +0100, Arianna Avanzini wrote:
> Some RS232 adapters handled by this driver are hotpluggable. The function
> serial8250_console_setup() is called during device init and is defined with
> the __init macro. In case the driver is built-in, hotplugging the device after
> the initialization phase has been completed (and the related memory has been
> freed) results in a kernel crash.
> This commit fixes the issue by removing __init from the function definition.
>
> Signed-off-by: Arianna Avanzini <avanzini.arianna@gmail.com>
> ---
> drivers/tty/serial/8250/8250_core.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
> index ca5cfdc..ca8108d 100644
> --- a/drivers/tty/serial/8250/8250_core.c
> +++ b/drivers/tty/serial/8250/8250_core.c
> @@ -3237,7 +3237,7 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count)
> serial8250_rpm_put(up);
> }
>
> -static int __init serial8250_console_setup(struct console *co, char *options)
> +static int serial8250_console_setup(struct console *co, char *options)
> {
> struct uart_port *port;
> int baud = 9600;
> --
> 2.1.3
This has already been in my tree for a long time, always work against
linux-next to avoid redoing work that others have already done.
thanks,
greg k-h
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2014-11-26 17:26 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-11-20 18:00 [PATCH RFC] tty, serial, 8250: remove __init from function serial8250_console_setup() Arianna Avanzini
2014-11-25 17:51 ` Greg KH
2014-11-25 22:18 ` Arianna Avanzini
2014-11-25 22:21 ` [PATCH] " Arianna Avanzini
2014-11-26 14:25 ` Peter Hurley
2014-11-26 17:26 ` Greg KH
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).