From mboxrd@z Thu Jan 1 00:00:00 1970 From: Greg Kroah-Hartman Subject: Re: [PATCH 26/36] serial: 8250_jz47xx: support for Ingenic jz47xx UARTs Date: Fri, 30 Jan 2015 15:31:05 -0800 Message-ID: <20150130233105.GA10564@kroah.com> References: <1421620067-23933-1-git-send-email-paul.burton@imgtec.com> <1421620881-25136-1-git-send-email-paul.burton@imgtec.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <1421620881-25136-1-git-send-email-paul.burton@imgtec.com> Sender: linux-mips-bounce@linux-mips.org Errors-to: linux-mips-bounce@linux-mips.org List-help: List-unsubscribe: List-software: Ecartis version 1.0.0 List-subscribe: List-owner: List-post: List-archive: To: Paul Burton Cc: linux-mips@linux-mips.org, Lars-Peter Clausen , linux-serial@vger.kernel.org List-Id: linux-serial@vger.kernel.org On Sun, Jan 18, 2015 at 02:41:21PM -0800, Paul Burton wrote: > Introduce a driver suitable for use with the UARTs present in > Ingenic jz47xx series SoCs. These are described as being ns16550 > compatible but aren't quite - they require the setting of an extra bit > in the FCR register to enable the UART module. The serial_out > implementation is the same as that in arch/mips/jz4740/serial.c - which > will shortly be removed. > > Signed-off-by: Paul Burton > Cc: Greg Kroah-Hartman > Cc: Lars-Peter Clausen > Cc: linux-serial@vger.kernel.org > --- > drivers/tty/serial/8250/8250_jz47xx.c | 228 ++++++++++++++++++++++++++++++++++ > drivers/tty/serial/8250/Kconfig | 8 ++ > drivers/tty/serial/8250/Makefile | 1 + > 3 files changed, 237 insertions(+) > create mode 100644 drivers/tty/serial/8250/8250_jz47xx.c This patch blows up on x86 systems, breaking the build :( Sorry, I can't take it. greg k-h