Re: [PATCH v3 2/4] serial: mxs-auart: Use helpers for gpio irqs

["Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>]

On Fri, Feb 06, 2015 at 05:55:33PM +0100, Janusz Uzycki wrote:
> The patch updates mxs-auart driver to use new mctrl_gpio helpers for
> gpio irqs. The code is much simpler now.
> 
> Signed-off-by: Janusz Uzycki <j.uzycki@elproma.com.pl>
> ---
> 
> Changes since RFC v2:
>  - fixed comments in *_ms functions to match the coding style
>    (credits to Uwe Kleine-König)
>  - rebased to next-20150204
> 
> ---
>  drivers/tty/serial/mxs-auart.c | 137 +++++------------------------------------
>  1 file changed, 17 insertions(+), 120 deletions(-)
> 
> diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c
> index d1298b6..5a8cf2c 100644
> --- a/drivers/tty/serial/mxs-auart.c
> +++ b/drivers/tty/serial/mxs-auart.c
> @@ -149,7 +149,6 @@ struct mxs_auart_port {
>  #define MXS_AUART_DMA_RX_READY	3  /* bit 3 */
>  #define MXS_AUART_RTSCTS	4  /* bit 4 */
>  	unsigned long flags;
> -	unsigned int mctrl_prev;
>  	enum mxs_auart_type devtype;
>  
>  	struct clk *clk;
> @@ -165,7 +164,6 @@ struct mxs_auart_port {
>  	void *rx_dma_buf;
>  
>  	struct mctrl_gpios	*gpios;
> -	int			gpio_irq[UART_GPIO_MAX];
>  	bool			ms_irq_enabled;
>  };
>  
> @@ -431,29 +429,6 @@ static void mxs_auart_set_mctrl(struct uart_port *u, unsigned mctrl)
>  	mctrl_gpio_set(s->gpios, mctrl);
>  }
>  
> -#define MCTRL_ANY_DELTA        (TIOCM_RI | TIOCM_DSR | TIOCM_CD | TIOCM_CTS)
> -static u32 mxs_auart_modem_status(struct mxs_auart_port *s, u32 mctrl)
> -{
> -	u32 mctrl_diff;
> -
> -	mctrl_diff = mctrl ^ s->mctrl_prev;
> -	s->mctrl_prev = mctrl;
> -	if (mctrl_diff & MCTRL_ANY_DELTA && s->ms_irq_enabled &&
> -						s->port.state != NULL) {
> -		if (mctrl_diff & TIOCM_RI)
> -			s->port.icount.rng++;
> -		if (mctrl_diff & TIOCM_DSR)
> -			s->port.icount.dsr++;
> -		if (mctrl_diff & TIOCM_CD)
> -			uart_handle_dcd_change(&s->port, mctrl & TIOCM_CD);
> -		if (mctrl_diff & TIOCM_CTS)
> -			uart_handle_cts_change(&s->port, mctrl & TIOCM_CTS);
> -
> -		wake_up_interruptible(&s->port.state->port.delta_msr_wait);
> -	}
> -	return mctrl;
> -}
> -
>  static u32 mxs_auart_get_mctrl(struct uart_port *u)
>  {
>  	struct mxs_auart_port *s = to_auart_port(u);
> @@ -481,18 +456,11 @@ static void mxs_auart_enable_ms(struct uart_port *port)
>  
>  	s->ms_irq_enabled = true;
>  
> -	if (s->gpio_irq[UART_GPIO_CTS] >= 0)
> -		enable_irq(s->gpio_irq[UART_GPIO_CTS]);
> -	/* TODO: enable AUART_INTR_CTSMIEN otherwise */
> -
> -	if (s->gpio_irq[UART_GPIO_DSR] >= 0)
> -		enable_irq(s->gpio_irq[UART_GPIO_DSR]);
> -
> -	if (s->gpio_irq[UART_GPIO_RI] >= 0)
> -		enable_irq(s->gpio_irq[UART_GPIO_RI]);
> -
> -	if (s->gpio_irq[UART_GPIO_DCD] >= 0)
> -		enable_irq(s->gpio_irq[UART_GPIO_DCD]);
> +	mctrl_gpio_enable_ms(s->gpios);
> +	/*
> +	 * TODO: enable AUART_INTR_CTSMIEN if CTS isn't handled by
> +	 * mctrl_gpio.
> +	 */
>  }
>  
>  /*
> @@ -510,18 +478,11 @@ static void mxs_auart_disable_ms(struct uart_port *port)
>  
>  	s->ms_irq_enabled = false;
>  
> -	if (s->gpio_irq[UART_GPIO_CTS] >= 0)
> -		disable_irq(s->gpio_irq[UART_GPIO_CTS]);
> -	/* TODO: disable AUART_INTR_CTSMIEN otherwise */
> -
> -	if (s->gpio_irq[UART_GPIO_DSR] >= 0)
> -		disable_irq(s->gpio_irq[UART_GPIO_DSR]);
> -
> -	if (s->gpio_irq[UART_GPIO_RI] >= 0)
> -		disable_irq(s->gpio_irq[UART_GPIO_RI]);
> -
> -	if (s->gpio_irq[UART_GPIO_DCD] >= 0)
> -		disable_irq(s->gpio_irq[UART_GPIO_DCD]);
> +	mctrl_gpio_disable_ms(s->gpios);
> +	/*
> +	 * TODO: disable AUART_INTR_CTSMIEN if CTS isn't handled by
> +	 * mctrl_gpio.
> +	 */
>  }
>  
>  static int mxs_auart_dma_prep_rx(struct mxs_auart_port *s);
> @@ -797,7 +758,6 @@ static irqreturn_t mxs_auart_irq_handle(int irq, void *context)
>  {
>  	u32 istat;
>  	struct mxs_auart_port *s = context;
> -	u32 mctrl_temp = s->mctrl_prev;
>  	u32 stat = readl(s->port.membase + AUART_STAT);
>  
>  	istat = readl(s->port.membase + AUART_INTR);
> @@ -809,16 +769,6 @@ static irqreturn_t mxs_auart_irq_handle(int irq, void *context)
>  		| AUART_INTR_CTSMIS),
>  			s->port.membase + AUART_INTR_CLR);
>  
> -	/*
> -	 * Dealing with GPIO interrupt
> -	 */
> -	if (irq == s->gpio_irq[UART_GPIO_CTS] ||
> -	    irq == s->gpio_irq[UART_GPIO_DCD] ||
> -	    irq == s->gpio_irq[UART_GPIO_DSR] ||
> -	    irq == s->gpio_irq[UART_GPIO_RI])
> -		mxs_auart_modem_status(s,
> -				mctrl_gpio_get(s->gpios, &mctrl_temp));
> -
>  	if (istat & AUART_INTR_CTSMIS) {
>  		if (CTS_AT_AUART() && s->ms_irq_enabled)
>  			uart_handle_cts_change(&s->port,
> @@ -883,9 +833,6 @@ static int mxs_auart_startup(struct uart_port *u)
>  	 */
>  	writel(AUART_LINECTRL_FEN, u->membase + AUART_LINECTRL_SET);
>  
> -	/* get initial status of modem lines */
> -	mctrl_gpio_get(s->gpios, &s->mctrl_prev);
> -
>  	s->ms_irq_enabled = false;
>  	return 0;
>  }
> @@ -1155,71 +1102,23 @@ static int serial_mxs_probe_dt(struct mxs_auart_port *s,
>  	return 0;
>  }
>  
> -static bool mxs_auart_init_gpios(struct mxs_auart_port *s, struct device *dev)
> +static bool mxs_auart_init_gpios(struct mxs_auart_port *s)
>  {
> -	enum mctrl_gpio_idx i;
> -	struct gpio_desc *gpiod;
> -
> -	s->gpios = mctrl_gpio_init(dev, 0);
> +	s->gpios = mctrl_gpio_init_dt(&s->port, 0);
>  	if (IS_ERR_OR_NULL(s->gpios))
mctrl_gpio_init_dt never returns NULL.

IMHO mxs_auart_init_gpios should return PTR_ERR(s->gpios) in this case.
(So the return type has to change.)

>  		return false;
>  
>  	/* Block (enabled before) DMA option if RTS or CTS is GPIO line */
>  	if (!RTS_AT_AUART() || !CTS_AT_AUART()) {
>  		if (test_bit(MXS_AUART_RTSCTS, &s->flags))
> -			dev_warn(dev,
> +			dev_warn(s->dev,
>  				 "DMA and flow control via gpio may cause some problems. DMA disabled!\n");
>  		clear_bit(MXS_AUART_RTSCTS, &s->flags);
>  	}
>  
> -	for (i = 0; i < UART_GPIO_MAX; i++) {
> -		gpiod = mctrl_gpio_to_gpiod(s->gpios, i);
> -		if (gpiod && (gpiod_get_direction(gpiod) == GPIOF_DIR_IN))
> -			s->gpio_irq[i] = gpiod_to_irq(gpiod);
> -		else
> -			s->gpio_irq[i] = -EINVAL;
> -	}
> -
>  	return true;
>  }
>  
> -static void mxs_auart_free_gpio_irq(struct mxs_auart_port *s)
> -{
> -	enum mctrl_gpio_idx i;
> -
> -	for (i = 0; i < UART_GPIO_MAX; i++)
> -		if (s->gpio_irq[i] >= 0)
> -			free_irq(s->gpio_irq[i], s);
> -}
> -
> -static int mxs_auart_request_gpio_irq(struct mxs_auart_port *s)
> -{
> -	int *irq = s->gpio_irq;
> -	enum mctrl_gpio_idx i;
> -	int err = 0;
> -
> -	for (i = 0; (i < UART_GPIO_MAX) && !err; i++) {
> -		if (irq[i] < 0)
> -			continue;
> -
> -		irq_set_status_flags(irq[i], IRQ_NOAUTOEN);
> -		err = request_irq(irq[i], mxs_auart_irq_handle,
> -				IRQ_TYPE_EDGE_BOTH, dev_name(s->dev), s);
> -		if (err)
> -			dev_err(s->dev, "%s - Can't get %d irq\n",
> -				__func__, irq[i]);
> -	}
> -
> -	/*
> -	 * If something went wrong, rollback.
> -	 */
> -	while (err && (--i >= 0))
> -		if (irq[i] >= 0)
> -			free_irq(irq[i], s);
> -
> -	return err;
> -}
> -
>  static int mxs_auart_probe(struct platform_device *pdev)
>  {
>  	const struct of_device_id *of_id =
> @@ -1262,8 +1161,6 @@ static int mxs_auart_probe(struct platform_device *pdev)
>  	s->port.type = PORT_IMX;
>  	s->port.dev = s->dev = &pdev->dev;
>  
> -	s->mctrl_prev = 0;
> -
>  	irq = platform_get_irq(pdev, 0);
>  	if (irq < 0)
>  		return irq;
> @@ -1276,14 +1173,14 @@ static int mxs_auart_probe(struct platform_device *pdev)
>  
>  	platform_set_drvdata(pdev, s);
>  
> -	if (!mxs_auart_init_gpios(s, &pdev->dev))
> +	if (!mxs_auart_init_gpios(s))
>  		dev_err(&pdev->dev,
>  			"Failed to initialize GPIOs. The serial port may not work as expected\n");
Better return failure in this case.

Best regards
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html