[PATCH] serial: imx: count tty buffer overruns

[PATCH] serial: imx: count tty buffer overruns

[manfred.schlaegl]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

As can be seen in function uart_insert_char (serial_core) the element
buf_overrun of struct uart_icount is used to count overruns of
tty-buffer.
Added support for counting of overruns in imx driver analogue to
serial_core.

Signed-off-by: Manfred Schlaegl <manfred.schlaegl@gmx.at>
- ---
 drivers/tty/serial/imx.c |   12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 8825039..384cf1d 100644
- --- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -700,7 +700,8 @@ static irqreturn_t imx_rxint(int irq, void *dev_id)
 		if (sport->port.ignore_status_mask & URXD_DUMMY_READ)
 			goto out;
 -		tty_insert_flip_char(port, rx, flg);
+		if (tty_insert_flip_char(port, rx, flg) == 0)
+			sport->port.icount.buf_overrun++;
 	}
  out:
@@ -922,8 +923,13 @@ static void dma_rx_callback(void *data)
 	dev_dbg(sport->port.dev, "We get %d bytes.\n", count);
  	if (count) {
- -		if (!(sport->port.ignore_status_mask & URXD_DUMMY_READ))
- -			tty_insert_flip_string(port, sport->rx_buf, count);
+		if (!(sport->port.ignore_status_mask & URXD_DUMMY_READ)) {
+			int bytes = tty_insert_flip_string(port, sport->rx_buf,
+					count);
+
+			if (bytes != count)
+				sport->port.icount.buf_overrun++;
+		}
 		tty_flip_buffer_push(port);
  		start_rx_dma(sport);
- -- 
1.7.10.4

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
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=BuFt
-----END PGP SIGNATURE-----

Re: [PATCH] serial: imx: count tty buffer overruns

[Greg Kroah-Hartman]

On Sat, Jun 20, 2015 at 06:41:20PM +0200, manfred.schlaegl@gmx.at wrote:
> As can be seen in function uart_insert_char (serial_core) the element
> buf_overrun of struct uart_icount is used to count overruns of
> tty-buffer.
> Added support for counting of overruns in imx driver analogue to
> serial_core.
> 
> Signed-off-by: Manfred Schlaegl <manfred.schlaegl@gmx.at>

Your From: line in your email doesn't match this, please fix up and
resend.

Same goes for your other serial patch.

thanks,

greg k-h

Re: [PATCH] serial: imx: count tty buffer overruns

[Manfred Schlaegl]

On 2015-06-20 18:57, Greg Kroah-Hartman wrote:
> On Sat, Jun 20, 2015 at 06:41:20PM +0200, manfred.schlaegl@gmx.at wrote:
>> As can be seen in function uart_insert_char (serial_core) the element
>> buf_overrun of struct uart_icount is used to count overruns of
>> tty-buffer.
>> Added support for counting of overruns in imx driver analogue to
>> serial_core.
>>
>> Signed-off-by: Manfred Schlaegl <manfred.schlaegl@gmx.at>
> 
> Your From: line in your email doesn't match this, please fix up and
> resend.
> 
> Same goes for your other serial patch.
> 
> thanks,
> 
> greg k-h
> 

Hi!

Argh.. Sorry for the mess .. 
The patch format was also not ok. I was working on a newly setup system.
I'll resend soon.

best regards,
manfred

[PATCH] serial: imx: count tty buffer overruns

[manfred.schlaegl]

As can be seen in function uart_insert_char (serial_core) the element
buf_overrun of struct uart_icount is used to count overruns of
tty-buffer.
Added support for counting of overruns in imx driver analogue to
serial_core.

Signed-off-by: Manfred Schlaegl <manfred.schlaegl@gmx.at>
---
 drivers/tty/serial/imx.c |   12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 8825039..384cf1d 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -700,7 +700,8 @@ static irqreturn_t imx_rxint(int irq, void *dev_id)
 		if (sport->port.ignore_status_mask & URXD_DUMMY_READ)
 			goto out;
 -		tty_insert_flip_char(port, rx, flg);
+		if (tty_insert_flip_char(port, rx, flg) == 0)
+			sport->port.icount.buf_overrun++;
 	}
  out:
@@ -922,8 +923,13 @@ static void dma_rx_callback(void *data)
 	dev_dbg(sport->port.dev, "We get %d bytes.\n", count);
  	if (count) {
-		if (!(sport->port.ignore_status_mask & URXD_DUMMY_READ))
-			tty_insert_flip_string(port, sport->rx_buf, count);
+		if (!(sport->port.ignore_status_mask & URXD_DUMMY_READ)) {
+			int bytes = tty_insert_flip_string(port, sport->rx_buf,
+					count);
+
+			if (bytes != count)
+				sport->port.icount.buf_overrun++;
+		}
 		tty_flip_buffer_push(port);
  		start_rx_dma(sport);
-- 
1.7.10.4

[PATCH] serial: imx: count tty buffer overruns

[Manfred Schlaegl]

As can be seen in function uart_insert_char (serial_core) the element
buf_overrun of struct uart_icount is used to count overruns of
tty-buffer.
Added support for counting of overruns in imx driver analogue to
serial_core.

Signed-off-by: Manfred Schlaegl <manfred.schlaegl@gmx.at>
---
 drivers/tty/serial/imx.c |   12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 8825039..384cf1d 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -700,7 +700,8 @@ static irqreturn_t imx_rxint(int irq, void *dev_id)
 		if (sport->port.ignore_status_mask & URXD_DUMMY_READ)
 			goto out;
 
-		tty_insert_flip_char(port, rx, flg);
+		if (tty_insert_flip_char(port, rx, flg) == 0)
+			sport->port.icount.buf_overrun++;
 	}
 
 out:
@@ -922,8 +923,13 @@ static void dma_rx_callback(void *data)
 	dev_dbg(sport->port.dev, "We get %d bytes.\n", count);
 
 	if (count) {
-		if (!(sport->port.ignore_status_mask & URXD_DUMMY_READ))
-			tty_insert_flip_string(port, sport->rx_buf, count);
+		if (!(sport->port.ignore_status_mask & URXD_DUMMY_READ)) {
+			int bytes = tty_insert_flip_string(port, sport->rx_buf,
+					count);
+
+			if (bytes != count)
+				sport->port.icount.buf_overrun++;
+		}
 		tty_flip_buffer_push(port);
 
 		start_rx_dma(sport);
-- 
1.7.10.4