From mboxrd@z Thu Jan 1 00:00:00 1970 From: Romain Izard Subject: [PATCH v4 2/8] clk: at91: pmc: Save SCSR during suspend Date: Thu, 28 Sep 2017 11:46:21 +0200 Message-ID: <20170928094627.31017-3-romain.izard.pro@gmail.com> References: <20170928094627.31017-1-romain.izard.pro@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20170928094627.31017-1-romain.izard.pro@gmail.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-mtd" Errors-To: linux-mtd-bounces+gldm-linux-mtd-36=gmane.org@lists.infradead.org To: Boris Brezillon , Michael Turquette , Stephen Boyd , Lee Jones , Wenyou Yang , Josh Wu , Richard Weinberger , David Woodhouse , Brian Norris , Marek Vasut , Cyrille Pitchen , Thierry Reding , Richard Genoud , Greg Kroah-Hartman , Jiri Slaby , Alan Stern , Ludovic Desroches , Nicolas Ferre , Alexandre Belloni Cc: linux-pwm@vger.kernel.org, linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org, linux-mtd@lists.infradead.org, linux-serial@vger.kernel.org, Romain Izard , linux-clk@vger.kernel.org List-Id: linux-serial@vger.kernel.org The contents of the System Clock Status Register (SCSR) needs to be restored into the System Clock Enable Register (SCER). As the bootloader will restore some clocks by itself, the issue can be missed as only the USB controller, the LCD controller, the Image Sensor controller and the programmable clocks will be impacted. Fix the obvious typo in the suspend/resume code, as the IMR register does not need to be saved twice. Signed-off-by: Romain Izard Acked-by: Nicolas Ferre --- drivers/clk/at91/pmc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/clk/at91/pmc.c b/drivers/clk/at91/pmc.c index 5c2b26de303e..07dc2861ad3f 100644 --- a/drivers/clk/at91/pmc.c +++ b/drivers/clk/at91/pmc.c @@ -86,7 +86,7 @@ static int pmc_suspend(void) { int i; - regmap_read(pmcreg, AT91_PMC_IMR, &pmc_cache.scsr); + regmap_read(pmcreg, AT91_PMC_SCSR, &pmc_cache.scsr); regmap_read(pmcreg, AT91_PMC_PCSR, &pmc_cache.pcsr0); regmap_read(pmcreg, AT91_CKGR_UCKR, &pmc_cache.uckr); regmap_read(pmcreg, AT91_CKGR_MOR, &pmc_cache.mor); @@ -129,7 +129,7 @@ static void pmc_resume(void) if (pmc_cache.pllar != tmp) pr_warn("PLLAR was not configured properly by the firmware\n"); - regmap_write(pmcreg, AT91_PMC_IMR, pmc_cache.scsr); + regmap_write(pmcreg, AT91_PMC_SCER, pmc_cache.scsr); regmap_write(pmcreg, AT91_PMC_PCER, pmc_cache.pcsr0); regmap_write(pmcreg, AT91_CKGR_UCKR, pmc_cache.uckr); regmap_write(pmcreg, AT91_CKGR_MOR, pmc_cache.mor); -- 2.11.0 ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/