linux-serial.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Romain Izard <romain.izard.pro@gmail.com>
To: Boris Brezillon <boris.brezillon@free-electrons.com>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@codeaurora.org>,
	Lee Jones <lee.jones@linaro.org>,
	Wenyou Yang <wenyou.yang@atmel.com>,
	Josh Wu <rainyfeeling@outlook.com>,
	Richard Weinberger <richard@nod.at>,
	David Woodhouse <dwmw2@infradead.org>,
	Brian Norris <computersforpeace@gmail.com>,
	Marek Vasut <marek.vasut@gmail.com>,
	Cyrille Pitchen <cyrille.pitchen@wedev4u.fr>,
	Thierry Reding <thierry.reding@gmail.com>,
	Richard Genoud <richard.genoud@gmail.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Jiri Slaby <jslaby@suse.com>,
	Alan Stern <stern@rowland.harvard.edu>,
	Ludovic Desroches <ludovic.desroches@microchip.com>,
	Nicolas Ferre <nicolas.ferre@microchip.com>,
	Ale
Cc: linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-mtd@lists.infradead.org, linux-pwm@vger.kernel.org,
	linux-serial@vger.kernel.org, linux-usb@vger.kernel.org,
	Romain Izard <romain.izard.pro@gmail.com>
Subject: [PATCH v4 6/8] pwm: atmel-tcb: Support backup mode
Date: Thu, 28 Sep 2017 11:46:25 +0200	[thread overview]
Message-ID: <20170928094627.31017-7-romain.izard.pro@gmail.com> (raw)
In-Reply-To: <20170928094627.31017-1-romain.izard.pro@gmail.com>

Save and restore registers for the PWM on suspend and resume, which
makes hibernation and backup modes possible.

Signed-off-by: Romain Izard <romain.izard.pro@gmail.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
---
 drivers/pwm/pwm-atmel-tcb.c | 63 +++++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 61 insertions(+), 2 deletions(-)

diff --git a/drivers/pwm/pwm-atmel-tcb.c b/drivers/pwm/pwm-atmel-tcb.c
index 75db585a2a94..acd3ce8ecf3f 100644
--- a/drivers/pwm/pwm-atmel-tcb.c
+++ b/drivers/pwm/pwm-atmel-tcb.c
@@ -37,11 +37,20 @@ struct atmel_tcb_pwm_device {
 	unsigned period;		/* PWM period expressed in clk cycles */
 };
 
+struct atmel_tcb_channel {
+	u32 enabled;
+	u32 cmr;
+	u32 ra;
+	u32 rb;
+	u32 rc;
+};
+
 struct atmel_tcb_pwm_chip {
 	struct pwm_chip chip;
 	spinlock_t lock;
 	struct atmel_tc *tc;
 	struct atmel_tcb_pwm_device *pwms[NPWM];
+	struct atmel_tcb_channel bkup[NPWM / 2];
 };
 
 static inline struct atmel_tcb_pwm_chip *to_tcb_chip(struct pwm_chip *chip)
@@ -175,12 +184,15 @@ static void atmel_tcb_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
 	 * Use software trigger to apply the new setting.
 	 * If both PWM devices in this group are disabled we stop the clock.
 	 */
-	if (!(cmr & (ATMEL_TC_ACPC | ATMEL_TC_BCPC)))
+	if (!(cmr & (ATMEL_TC_ACPC | ATMEL_TC_BCPC))) {
 		__raw_writel(ATMEL_TC_SWTRG | ATMEL_TC_CLKDIS,
 			     regs + ATMEL_TC_REG(group, CCR));
-	else
+		tcbpwmc->bkup[group].enabled = 1;
+	} else {
 		__raw_writel(ATMEL_TC_SWTRG, regs +
 			     ATMEL_TC_REG(group, CCR));
+		tcbpwmc->bkup[group].enabled = 0;
+	}
 
 	spin_unlock(&tcbpwmc->lock);
 }
@@ -263,6 +275,7 @@ static int atmel_tcb_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
 	/* Use software trigger to apply the new setting */
 	__raw_writel(ATMEL_TC_CLKEN | ATMEL_TC_SWTRG,
 		     regs + ATMEL_TC_REG(group, CCR));
+	tcbpwmc->bkup[group].enabled = 1;
 	spin_unlock(&tcbpwmc->lock);
 	return 0;
 }
@@ -445,10 +458,56 @@ static const struct of_device_id atmel_tcb_pwm_dt_ids[] = {
 };
 MODULE_DEVICE_TABLE(of, atmel_tcb_pwm_dt_ids);
 
+#ifdef CONFIG_PM_SLEEP
+static int atmel_tcb_pwm_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct atmel_tcb_pwm_chip *tcbpwm = platform_get_drvdata(pdev);
+	void __iomem *base = tcbpwm->tc->regs;
+	int i;
+
+	for (i = 0; i < (NPWM / 2); i++) {
+		struct atmel_tcb_channel *chan = &tcbpwm->bkup[i];
+
+		chan->cmr = readl(base + ATMEL_TC_REG(i, CMR));
+		chan->ra = readl(base + ATMEL_TC_REG(i, RA));
+		chan->rb = readl(base + ATMEL_TC_REG(i, RB));
+		chan->rc = readl(base + ATMEL_TC_REG(i, RC));
+	}
+	return 0;
+}
+
+static int atmel_tcb_pwm_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct atmel_tcb_pwm_chip *tcbpwm = platform_get_drvdata(pdev);
+	void __iomem *base = tcbpwm->tc->regs;
+	int i;
+
+	for (i = 0; i < (NPWM / 2); i++) {
+		struct atmel_tcb_channel *chan = &tcbpwm->bkup[i];
+
+		writel(chan->cmr, base + ATMEL_TC_REG(i, CMR));
+		writel(chan->ra, base + ATMEL_TC_REG(i, RA));
+		writel(chan->rb, base + ATMEL_TC_REG(i, RB));
+		writel(chan->rc, base + ATMEL_TC_REG(i, RC));
+		if (chan->enabled) {
+			writel(ATMEL_TC_CLKEN | ATMEL_TC_SWTRG,
+				base + ATMEL_TC_REG(i, CCR));
+		}
+	}
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(atmel_tcb_pwm_pm_ops, atmel_tcb_pwm_suspend,
+			 atmel_tcb_pwm_resume);
+
 static struct platform_driver atmel_tcb_pwm_driver = {
 	.driver = {
 		.name = "atmel-tcb-pwm",
 		.of_match_table = atmel_tcb_pwm_dt_ids,
+		.pm = &atmel_tcb_pwm_pm_ops,
 	},
 	.probe = atmel_tcb_pwm_probe,
 	.remove = atmel_tcb_pwm_remove,
-- 
2.11.0

  parent reply	other threads:[~2017-09-28  9:46 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-09-28  9:46 [PATCH v4 0/8] Various patches for SAMA5D2 backup mode Romain Izard
2017-09-28  9:46 ` [PATCH v4 1/8] clk: at91: pmc: Wait for clocks when resuming Romain Izard
2017-09-28  9:46 ` [PATCH v4 2/8] clk: at91: pmc: Save SCSR during suspend Romain Izard
2017-09-28  9:46 ` [PATCH v4 3/8] clk: at91: pmc: Support backup for programmable clocks Romain Izard
2017-09-28  9:46 ` [PATCH v4 4/8] mtd: nand: atmel: Avoid ECC errors when leaving backup mode Romain Izard
2017-10-05  7:22   ` Boris Brezillon
2017-09-28  9:46 ` [PATCH v4 5/8] ehci-atmel: Power down during suspend is normal Romain Izard
2017-09-28  9:46 ` Romain Izard [this message]
2017-09-28  9:46 ` [PATCH v4 7/8] atmel_flexcom: Support backup mode Romain Izard
2017-09-28  9:46 ` [PATCH v4 8/8] tty/serial: atmel: Prevent a warning on suspend Romain Izard
2017-09-28 10:02 ` [PATCH v4 0/8] Various patches for SAMA5D2 backup mode Alexandre Belloni

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170928094627.31017-7-romain.izard.pro@gmail.com \
    --to=romain.izard.pro@gmail.com \
    --cc=boris.brezillon@free-electrons.com \
    --cc=computersforpeace@gmail.com \
    --cc=cyrille.pitchen@wedev4u.fr \
    --cc=dwmw2@infradead.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=jslaby@suse.com \
    --cc=lee.jones@linaro.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=linux-pwm@vger.kernel.org \
    --cc=linux-serial@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=ludovic.desroches@microchip.com \
    --cc=marek.vasut@gmail.com \
    --cc=mturquette@baylibre.com \
    --cc=nicolas.ferre@microchip.com \
    --cc=rainyfeeling@outlook.com \
    --cc=richard.genoud@gmail.com \
    --cc=richard@nod.at \
    --cc=sboyd@codeaurora.org \
    --cc=stern@rowland.harvard.edu \
    --cc=thierry.reding@gmail.com \
    --cc=wenyou.yang@atmel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).