[PATCH 0/3] tree-wide: don't use GPIOF_* with gpiod_get_direction

[PATCH 0/3] tree-wide: don't use GPIOF_* with gpiod_get_direction

[Wolfram Sang]

The documentation was wrong, gpiod_get_direction() returns 0/1 instead of the
GPIOF_* flags. The docs were fixed with commit 94fc73094abe47 ("gpio: correct
docs about return value of gpiod_get_direction"). Now, fix the users who got it
as wrong as I did when developing bus recovery for the R-Car I2C driver.

We get rid of two users of 'linux/gpio.h' this way :)

Only build tested due to no hardware.


Wolfram Sang (3):
  extcon: int3496: don't use GPIOF_* with gpiod_get_direction
  serial: mxs-auart: don't use GPIOF_* with gpiod_get_direction
  backlight: pwm_bl: don't use GPIOF_* with gpiod_get_direction

 drivers/extcon/extcon-intel-int3496.c | 4 ++--
 drivers/tty/serial/mxs-auart.c        | 3 +--
 drivers/video/backlight/pwm_bl.c      | 6 +++---
 3 files changed, 6 insertions(+), 7 deletions(-)

-- 
2.11.0

[PATCH 2/3] serial: mxs-auart: don't use GPIOF_* with gpiod_get_direction

[Wolfram Sang]

The documentation was wrong, gpiod_get_direction() returns 0/1 instead
of the GPIOF_* flags. The docs were fixed with commit 94fc73094abe47
("gpio: correct docs about return value of gpiod_get_direction"). Now,
fix this user (until a better, system-wide solution is in place). This
also means we can drop the deprecated use of 'linux/gpio.h'. Yay!

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
Only build tested!

 drivers/tty/serial/mxs-auart.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c
index 5b470406bf9d67..079dc47aa142d8 100644
--- a/drivers/tty/serial/mxs-auart.c
+++ b/drivers/tty/serial/mxs-auart.c
@@ -40,7 +40,6 @@
 
 #include <asm/cacheflush.h>
 
-#include <linux/gpio.h>
 #include <linux/gpio/consumer.h>
 #include <linux/err.h>
 #include <linux/irq.h>
@@ -1597,7 +1596,7 @@ static int mxs_auart_init_gpios(struct mxs_auart_port *s, struct device *dev)
 
 	for (i = 0; i < UART_GPIO_MAX; i++) {
 		gpiod = mctrl_gpio_to_gpiod(s->gpios, i);
-		if (gpiod && (gpiod_get_direction(gpiod) == GPIOF_DIR_IN))
+		if (gpiod && (gpiod_get_direction(gpiod) == 1))
 			s->gpio_irq[i] = gpiod_to_irq(gpiod);
 		else
 			s->gpio_irq[i] = -EINVAL;
-- 
2.11.0